Nanolayer CrAlN/TiSiN coating designed for tribological applications

With the goal to produce a hard and tough coating intended for tribological applications, CrAlN/TiSiN nanolayer coating was prepared by alternative deposition of CrAlN and TiSiN layers. In the first part of the article, a detailed study of phase composition, microstructure, and layer structure of CrAlN/TiSiN coating is presented. In the second part, its mechanical properties, fracture and tribological behavior are compared to the nanocomposite TiSiN coating. An industrial magnetron sputtering unit was used for coating deposition. X-ray photoelectron spectroscopy, energy dispersive X-ray spectroscopy, X-ray diffraction, scanning electron microscopy, and transmission electron microscopy were used for compositional and microstructural analysis. Mechanical properties and fracture behavior were studied by instrumented indentation and focused ion beam techniques. Tribological properties were evaluated by ball-on-disk test in a linear reciprocal mode. A complex layer structure was found in the nanolayer coating. The TiSiN layers were epitaxially stabilized inside the coating which led to formation of dislocations at interfaces, to introduction of disturbances in the coating growth, and as a result, to development of fine-grained columnar microstructure. Indentation load required for the onset of fracture was twice lower for the nanolayer CrAlN/TiSiN, compared to the nanocomposite TiSiN coating. This agrees very well with their mechanical properties, with H³/E² being twice higher for the TiSiN coating. However, the nanolayer coating experienced less severe damage, which had a strong impact on tribological behavior. A magnitude of order lower wear rate and four times lower steady state friction coefficient were found for the nanolayer coating.     

The effect of multiple time scales and subexponentiality in MPEGvideo streams on queueing behavior

Guided by the empirical observation that real-time MPEG video streams exhibit both multiple time scale and subexponential characteristics, we construct a video model that captures both of these characteristics and is amenable to queueing analysis. We investigate two fundamental approaches for extracting the model parameters: using sample path and second-order statistics-based methods. The model exhibits the following two canonical queueing behaviors. When strict stability conditions are satisfied, i.e., the conditional mean of each scene is smaller than the capacity of the server, precise modeling of the interscene dynamics (long-term dependency) is not essential for the accurate prediction of small to moderately large queue sizes. In this case, the queue length distribution is determined using quasistationary (perturbation theory) analysis. When weak stability conditions are satisfied, i.e., the conditional mean of at least one scene type is greater than the capacity of the server, the dominant effect for building a large queue size is the subexponential (long-tailed) scene length distribution. In this case, precise modeling of intrascene statistics is of secondary importance for predicting the large queueing behavior. A fluid model, whose arrival process is obtained from the video data by replacing scene statistics with their means, is shown to asymptotically converge to the exact queue distribution. Using the transition scenario of moving from one stability region to the other by a change in the value of the server capacity, we synthesize recent queueing theoretic advances and ad hoc results in video modeling, and unify a broad range of seemingly contradictory experimental observations found in the literature. As a word of caution for the widespread usage of second-order statistics modeling methods, we construct two processes with the same second-order statistics that produce distinctly different queueing behaviors     

Modeling video sources for real-time scheduling

What is the impact of the autocorrelation of variable-bit-rate (VBR) sources on real-time scheduling algorithms? Our results show that the impact of long term, or interframe, autocorrelation is negligible, while the impact of short term, or intraframe, autocorrelation can be significant. Such results are essentially independent of the video coding scheme employed. To derive these results, video sequences are modeled as a collection of stationary subsequences called scenes. Within a scene, a statistical model is derived for both the sequence of frames and of slices. The model captures the distribution and the autocorrelation function of real-time video data. In previous work, the pseudoperiodicity of the slice level auto-correlation function made it difficult to develop a simple yet accurate model. We present a generalization of previous methods that can easily capture this pseudoperiodicity and is suited for modeling a greater variety of autocorrelation functions. By simply tuning a few parameters, the model reproduces the statistic behavior of sources with different types and levels of correlation on both the frame and the slice level.     

A 4-MB on-chip L2 cache for a 90-nm 1.6-GHz 64-bit microprocessor

A 4-MB L2 data cache was implemented for a 64-bit 1.6-GHz SPARC(r) RISC microprocessor. Static sense amplifiers were used in the SRAM arrays and for global data repeaters, resulting in robust and flexible timing operation. Elimination of the global clock grid over the SRAM array saves power, enabled by combining the clock information with array select signals. Redundancy was implemented flexibly, with shift circuits outside the main data array for area efficiency. The chip integrates 315 million transistors and uses an 8-metal-layer 90-nm CMOS process.     

Aging, attention, and intelligence.

The aims of this study were (a) to find out if attentional ability factors that are separate from the well-established ability factors (e.g., fluid intelligence, crystallized intelligence, and short-term acquisition and retrieval function) can be identified, and (b) to establish, through the use of part correlations, whether attentional abilities play a role in the changes in fluid and crystallized intelligence that occur with increasing age. A battery of 36 tests (19 psychometric tests and 17 measures of attentional processes) were given to 100 people, 20 of whom were in each age decade between 20 and 70. Results indicated that three attentional factors—Search, Concentration, and Attentional Flexibility—exist at the primary-ability level and that all three define fluid intelligence at the second-order level. Results also indicate that the decline in fluid intelligence with increasing age disappears if attentional factors are parted-out. Similarly, the increase in crystallized intelligence with increasing age becomes even greater if one controls for attentional processes. I conclude that changes in attentional processes play an important part in changes in human intelligence with age. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

SurA assists the folding of Escherichia coli outer membrane proteins

Many proteins require enzymatic assistance in order to achieve a functional conformation. One rate-limiting step in protein folding is the cis-trans isomerization of prolyl residues, a reaction catalyzed by prolyl isomerases. SurA, a periplasmic protein of Escherichia coli, has sequence similarity with the prolyl isomerase parvulin. We tested whether SurA was involved in folding periplasmic and outer membrane proteins by using trypsin sensitivity as an assay for protein conformation. We determined that the efficient folding of three outer membrane proteins (OmpA, OmpF, and LamB) requires SurA in vivo, while the folding of four periplasmic proteins was independent of SurA. We conclude that SurA assists in the folding of certain secreted proteins.     

Central poststroke pain and Wallenberg''s lateral medullary infarction: frequency, character, and determinants in 63 patients

BACKGROUND: Questionnaire-based surveys from several countries have consistently detected adverse health associated with home dampness and mould growth. METHODS: To test the validity of questions commonly used to indicate the presence of indoor mould, questionnaires were administered in 403 homes where dust samples were taken for viable fungi and air samples for ergosterol. RESULTS: Geometric mean concentrations of the total viable fungi were 255 (SE 116) x 10(3) CFU/g when mouldy odours were reported and 155 (SE 55) when odours were not reported (P = 0.01). Similarly, reported water damage was associated with a 50% increase (P = 0.06). Geometric mean concentrations of the predominantly indoor-source fungi, Aspergillus plus Penicillium, were twice as high when mould or mildew was reported than when not mentioned (P = 0.01). The presence of reported mould or water damage was unrelated to the presence of detectable levels of ergosterol. There was evidence for reporting bias: in the presence of low concentrations of viable fungi in dust, respondents reporting allergies were more likely to report visible mould growth (odds ratio [OR] = 1.8, 95% confidence interval [CI]: 0.9-3.5, P = 0.10. In the presence of elevated concentrations of dust fungi, respondents who smoked were less likely to report visible mould growth, (OR = 0.4, 95% CI: 0.2-0.7, P = 0.005). CONCLUSIONS: Reported mould, water damage, and mouldy odours were associated with elevated levels of indoor fungi. However, inaccuracy was high and there was evidence of a systematic reporting bias. Future research should concentrate on developing accurate objective measures of exposure to fungi, and then use this information to develop valid questionnaires. Currently, objective measures not questionnaires, are recommended to clarify the health effects of indoor fungi.     

Image compression using wavelet transform and multiresolutiondecomposition

Schemes for image compression of black-and-white images based on the wavelet transform are presented. The multiresolution nature of the discrete wavelet transform is proven as a powerful tool to represent images decomposed along the vertical and horizontal directions using the pyramidal multiresolution scheme. The wavelet transform decomposes the image into a set of subimages called shapes with different resolutions corresponding to different frequency bands. Hence, different allocations are tested, assuming that details at high resolution and diagonal directions are less visible to the human eye. The resultant coefficients are vector quantized (VQ) using the LGB algorithm. By using an error correction method that approximates the reconstructed coefficients quantization error, we minimize distortion for a given compression rate at low computational cost. Several compression techniques are tested. In the first experiment, several 512x512 images are trained together and common table codes created. Using these tables, the training sequence black-and-white images achieve a compression ratio of 60-65 and a PSNR of 30-33. To investigate the compression on images not part of the training set, many 480x480 images of uncalibrated faces are trained together and yield global tables code. Images of faces outside the training set are compressed and reconstructed using the resulting tables. The compression ratio is 40; PSNRs are 30-36. Images from the training set have similar compression values and quality. Finally, another compression method based on the end vector bit allocation is examined.     

Integration of Data from Liquid–Liquid Phase Separation Databases Highlights Concentration and Dosage Sensitivity of LLPS Drivers

Liquid–liquid phase separation (LLPS) is a molecular process that leads to the formation of membraneless organelles, representing functionally specialized liquid-like cellular condensates formed by proteins and nucleic acids. Integrating the data on LLPS-associated proteins from dedicated databases revealed only modest agreement between them and yielded a high-confidence dataset of 89 human LLPS drivers. Analysis of the supporting evidence for our dataset uncovered a systematic and potentially concerning difference between protein concentrations used in a good fraction of the in vitro LLPS experiments, a key parameter that governs the phase behavior, and the proteomics-derived cellular abundance levels of the corresponding proteins. Closer scrutiny of the underlying experimental data enabled us to offer a sound rationale for this systematic difference, which draws on our current understanding of the cellular organization of the proteome and the LLPS process. In support of this rationale, we find that genes coding for our human LLPS drivers tend to be dosage-sensitive, suggesting that their cellular availability is tightly regulated to preserve their functional role in direct or indirect relation to condensate formation. Our analysis offers guideposts for increasing agreement between in vitro and in vivo studies, probing the roles of proteins in LLPS.