Beam test of the CsI(Tl) calorimeter for the BELLE detector at the KEK-B factory

We studied the performance of a prototype electromagnetic calorimeter for the BELLE detector at the KEK proton synchrotron for an energy range of 0.25–3.5 GeV. The prototype consisted of an array of 6 × 5 CsI(Tl) crystals with 30 cm length (16.2 radiation lengths) and about 6 cm × 6 cm cross section. The scintillation light of each CsI(Tl) crystal was read out by two large-area PIN photodiodes and charge-sensitive preamplifiers attached at the rear face of the crystal. We measured the energy and position resolution for electrons and the e/π separation for two sets of matrix configurations: one corresponded to the center and the other to the edge of the barrel calorimeter. The overall performance measured by the test proves that the prototype calorimeter is satisfactory for the use in the BELLE detector.     

Production of IL-6 by T cells from the femoral head of patients with rapidly destructive coxopathy (RDC)

We developed a method to improve the quantitative precision of FDG-PET scans in cancer patients. The total-lesion evaluation method generates a correlation coefficient (r) constrained Patlak parametric image of the lesion together with three calculated glucose metabolic indices: (a) the total-lesion metabolic index ("KT-tle", ml/min/lesion); (b) the total-lesion voxel index ("VT-tle", voxels/lesion); and (c) the global average metabolic index ("KV-tle", ml/min/voxel). METHODS: The glucose metabolic indices obtained from conventional region of interest (ROI) and multiplane evaluation were used as standards to evaluate the accuracy of the total-lesion evaluation method. Computer simulations and four patients with metastatic melanoma before and after chemotherapy were studied. RESULTS: Computer simulations showed that the total-lesion evaluation method has improved precision (% s.d. < 0.6%) and accuracy (approximately 10% error) compared with the conventional ROI method (% s.d. approximately 5%; approximately 25% error). The KT-tle and VT-tle indices from human FDG-PET studies using the total-lesion evaluation method showed excellent correlations with the corresponding values obtained from the conventional ROI methods and multiplane evaluation (r approximately 1.0) and CT lesion volume measurements. CONCLUSION: This method is a simple but reliable way to quantitatively monitor tumor FDG uptake. The method has several advantages over the conventional ROI method: (a) less sensitive to the ROI definition, (b) no need for image registration of serial scan data and (c) includes tumor volume changes in the global tumor metabolism.     

Extraction of Trivalent Rare Earths and Minor Actinides from Nitric Acid with N,N,N’,N’-Tetradodecyldiglycolamide (TDdDGA) by Using Mixer-Settler Extractors in a Hot Cell

Single-stage batch experiments to reveal the extraction properties of N,N,N’,N’-tetradodecyldiglycolamide (TDdDGA) for Y, La, Eu, Nd, and Am in nitric acid were carried out. The distribution ratios of Y, Eu, Nd, and Am exceeded 10 when the nitric acid concentration was 1–2 mol/dm³ (M), and the distribution ratio of La was 5.5 when the nitric acid concentration was 2 M. A continuous counter-current experiment using 0.1 M TDdDGA diluted with n-dodecane was performed using mixer-settler extractors installed in a hot cell. Nitric acid with a concentration of 2.1 M containing minor actinides (MAs: Am and Cm), rare earths (REs: Y, La, Nd, and Eu), and other fission products (Sr, Cs, Zr, Mo, Ru, Rh, and Pd) was fed to the extractor. TDdDGA effectively extracted MAs and REs from the feed, while other fission products were barely extracted. The extracted MAs and REs were back-extracted by bringing them in contact with 0.02 M nitric acid, and they were collected as the MA–RE fraction. The results indicated that more than 98% of Am and Cm in the feed were recovered in the MA–RE fraction. The proportions of Y, La, Nd, and Eu in the MA–RE fraction were 94.0%, 99.9%, 99.9%, and 86.9%, respectively.     

Colored amorphous silica-based powder with TiN nanocrystals precipitated by ammonolysis of Ti–Si–O ternary glass

Coloration of amorphous silica powder containing titania was investigated by nitridation in an ammonia flow. The oxide precursors were obtained by the hydrolysis of a mixture of tetraethyl orthosilicate (TEOS) and tetrabutoxy titanium (TBT). The color changed with the amount of TBT in the mixture, the hydrolysis pH and the ammonolysis temperature. The original white color of the 8 mol% TBT powder hydrolyzed under basic pH conditions changed to pale goldenrod at 700°C, then to dark olive green at 800°C, and further darkened with increasing ammonolysis temperature. A steel-blue color appeared at 900°C for the powder obtained with 3 mol% TBT, and increased in darkness at 1000°C. A similar bluish color was observed for powders obtained by acidic hydrolysis after ammonolysis above 900°C, and this was independent of the amount of titania, although the chroma decreased with increasing firing temperature for the powder with 3 mol% TBT. The ammonolysis powder products were characterized using X-ray diffraction (XRD), electron probe micro analysis (EPMA), transmission electron microscopy-electron energy-loss spectroscopy (TEM-EELS), scanning transmission electron microscopy-high-angle annular dark-field imaging (STEM-HAADF) and Ti–K edge X-ray absorption fine structure (XAFS). The color change was related to both precipitated TiN nanocrystals and residual titanium in the amorphous silica matrix. The TiN exhibited a goldish reflection and also plasmonic absorption from light blue to gray depending on the TiN crystallite size. The plasmonic absorption and resonance of nanocrystalline TiN will be useful similarly to that of gold in nanotechnology for various kinds of energy application.     

An analytical study of the effect of a support geometry on frequency shift and support loss of piezoelectric ring-shaped resonators for healthcare and environmental applications

Ring-shaped resonators with one support have been designed in this work. The ring-shaped resonator reacts with a mass perturbation to provide eigenstate or frequency shifts which could transfer to electrical signals by piezoelectric effect. The aforementioned ring-shaped resonator is mainly comprised with a multilayer of Pt/Ti/PZT/Pt/Ti/SiO₂ deposited on the silicon-on-insulator wafer and expected to be a contour mode. In order to estimate the sensitivity of the ring-shaped resonator against the mass perturbation, the theoretical analysis was conducted by ANSYS from two aspects including: (a) the effect of support geometry on frequency shift and support loss (from view point of vibration mode shape); and (b) the mass application methodology. It is found that low-amplitude vibration area is smaller at narrow support, and frequency shift of trapezoid support is higher than that of rectangle support.     

Using bottom surface reflectance to map coastal marine areas: a new application method for Lyzenga's model

Remote sensing is widely used in coastal management. Lyzenga's model has been traditionally used to explain the relationship between bottom surface reflectance and the radiance level measured by satellite. Due to its central assumption, this model lacks accuracy compared with the other radiative transfer models. Nonetheless, it enables, with a single and simple equation, representation of the multiple optical processes taking place in coastal areas. Mapping processes associated with this model may include radiometric correction, a technique previously pointed out as a major driver of mapping accuracy. Radiometric correction is generally based on a depth-invariant index, efficient for clear waters (Jerlov water type I to II) but largely unsuitable when transparency decreases (Jerlov water type II to III). In order to overcome this problem, we developed a new index for radiometric correction, which combines bathymetry data with attenuation coefficients. The improved efficiency of our model with regard to the traditional depth invariant index was demonstrated through two case studies: Funakoshi Bay (Japan; Jerlov water type II) and the Gabes Gulf part located off Mahares (Tunisia; Jerlov water type II to III).     

A rapid-detection method for radioactive cesium in the air

We propose a method of rapidly detecting radioactive cesium floating in the air for the purpose of alerting people active in the ‘difficult-to-return zone’ of Fukushima to changes in airborne radioactivity. With this purpose in mind, we set requirement specifications and created a new system concept. The targeted detection limit was 30 Bq/m³ and the mandatory level of measurement time was 48 min with a target level of 12 min, and these periods are 10 times faster than those of conventional air monitors. The system consists of a conventional gamma-spectrometer with a novel shaped shield. The targeted peak region of the measured energy spectrum is analyzed. After the basic design and confirmation of feasibility, we perform some experiments in the normal environment of Yokohama city and the difficult-to-return zone of Fukushima. Using the results, we conducted the design improvement and performance evaluation. As a result, the system performance is found to satisfy requirements. We thus conclude that this system is a promising candidate for rapid detection of airborne radioactivity in the difficult-to-return zone of Fukushima.