Technical review: Improvement of mechanical properties and suitability towards armor applications – Alumina composites

Ceramic Matrix Composites (CMCs) have many interesting properties, mainly light weight, cost efficiency, low density, high compressive strength, high hardness and durability. Hence, they emerged as a boon to the development of personnel armors in the past. The current work aims to review various new methodologies adapted for the reinforcement of Alumina (Al₂O₃) CMCs in recent times, including some of the interesting results obtained with respect to mechanical properties, suitability of the synthesized composites for armor applications, and the upcoming reinforcement trends. Finally, studies related to reinforcement in Al₂O₃ CMCs, specifically towards armor applications have been consolidated to arrive at some of the important inferences for concluding reasonably.     

Electrocatalytic Reduction of CO2 to Ethylene by Molecular Cu‐Complex Immobilized on Graphitized Mesoporous Carbon

The electrochemical reduction of carbon dioxide (CO₂) to hydrocarbons is a challenging task because of the issues in controlling the efficiency and selectivity of the products. Among the various transition metals, copper has attracted attention as it yields more reduced and C2 products even while using mononuclear copper center as catalysts. In addition, it is found that reversible formation of copper nanoparticle acts as the real catalytically active site for the conversion of CO₂ to reduced products. Here, it is demonstrated that the dinuclear molecular copper complex immobilized over graphitized mesoporous carbon can act as catalysts for the conversion of CO₂ to hydrocarbons (methane and ethylene) up to 60%. Interestingly, high selectivity toward C2 product (40% faradaic efficiency) is achieved by a molecular complex based hybrid material from CO₂ in 0.1 m KCl. In addition, the role of local pH, porous structure, and carbon support in limiting the mass transport to achieve the highly reduced products is demonstrated. Although the spectroscopic analysis of the catalysts exhibits molecular nature of the complex after 2 h bulk electrolysis, morphological study reveals that the newly generated copper cluster is the real active site during the catalytic reactions.     

Cardiac disease in chronic uremia: management

Heart disease is a common cause of morbidity in end-stage renal disease (ESRD) patients. The management of heart disease in these patients requires a multidimensional approach to the management of heart failure, coronary disease, and arrhythmias, and to risk factors such as hypertension, anemia, secondary hyperparathyroidism, and electrolyte/acid-base disturbances. Coronary artery disease management includes use of antianginal drugs and revascularization of coronary arteries with angioplasty +/- stent placement or coronary artery bypass grafting. The long-term outcomes of these procedures need to be assessed and improved. Hypertension occupies a major role in the pathogenesis of heart disease in ESRD, and early and adequate control of hypertension is likely to have a major impact on the progression of cardiac disease. This entails the achievement of optimal volume status, combined with the appropriate use of antihypertensive agents such as calcium channel blockers, beta-blockers, angiotensin-converting enzyme (ACE) inhibitors, vasodilators, alpha-blockers, and central sympatholytic drugs. In ESRD patients, specific dialysis-related complications such as intradialytic hypotension and pericardial effusion may have additional effects on cardiac function and require attention. The choice of dialysate composition and membrane may influence clinical outcomes with specific effects on cardiac performance.     

Research in object-oriented manufacturing simulations:an assessment of the state of the art

Object-oriented programming (OOP) has been revolutionizing software development and maintenance. When applied to simulation of manufacturing systems, OOP also provides an opportunity for developing new ways of thinking and modeling. In this paper, we identify existing large-scale, persistent OOP-based research efforts focusing on manufacturing system simulation, and present an integrating framework for discussing the associated modeling abstractions, implementation strategies, common themes, and distinctive features. The goal is to identify the fundamental research and application issues, assess the current state of the art, and identify key research needs.     

Dynamics of ion beam modification of polymer films

Thin polymer films were irradiated in a high vacuum environment with energetic (～2 MeV) ions. The emitted molecular species were studied with a quadrupole mass spectrometer during bombardment. The emitted species are predominantly small molecules. The efficiency of emission depends strongly upon the electronic energy loss of the incident ions in the film and, hence, upon the velocity and atomic number of the incident ion. The emission efficiency of all species decreases with increasing damage in the film. By pulsing the ion beam, the time dependence of irradiation induced emission of molecular species from the films has been studied. Emission delays of hundreds of milliseconds are observed in some cases. These delays are found to depend upon the emitted species as well as the host film and seem to be associated with diffusion of the species in the films.     

HSIC-based affinity measure for learning on graphs

Pattern Analysis and Applications - The performance of graph-based learning techniques largely relies on the edges defined between the vertices of the graph. These edges that represent the affinity...     

Microcellular foaming of poly(lactic acid) branched with food-grade chain extenders

This study evaluated the effectiveness and efficiency of two food-grade multifunctional epoxies chain extenders (CE) in branching PLA and improving its foamability. Both CE grades were effective in branching PLA causing increased end mixing torque, shear, elongational viscosities, molecular weight but decreased crystallinity of poly(lactic acid) (PLA) with CE content, due to chain entanglements. CE with low epoxy equivalent weight (EEW) was more efficient than the counterpart with high EEW due to its high reactivity. Neat PLA foams showed poor cell morphology with areas without nucleated cells and had a low expansion, owing to its low elongational viscosity. By contrast, there was a considerable change in the morphology of the PLA foam structure caused by its branching. Chain-extended PLA foams had uniform cell morphology with a high void fraction (up to ~85%) and expansion ratio (an eightfold expansion over unfoamed PLA) due to their high elongational viscosities, suggesting that melt properties of branched PLA were appropriate for optimum cell growth and stabilization during foaming. Overall, CE with low EEW was the most effective grade and 0.25% the optimum content that provided appropriate melt viscosity to produce PLA foams with a homogeneous structure, fine cells, high void fraction, high volume expansion ratio, and cell-population density.     

A Hybrid RF and Vision Aware Fusion Scheme for Multi-Sensor Wireless Capsule Endoscopic Localization

A huge torrent of data traffic is generated from various heterogeneous applications and services at the Internet backbone. In general, at the backbone, all such applications and services are allocated spectral resources under a shared spectrum environment within elastic optical networks (EONs). In such a fully shared environment, connection requests (CRs) belonging to different traffic profiles compete for spectral resources. Hence, it is very challenging for network operators to resolve resource conflict that occur at the time of provisioning resources to such CRs. The heterogeneous traffic profile (HTP) considered in this work includes permanent lightpath demands (PLDs) and scheduled lightpath demands (SLDs). We propose various distance adaptive routing and spectrum assignment (DA-RSA) heuristics to resolve resource conflict among these two traffic profiles in EONs under a full sharing environment. Conventionally, preemption was the only technique to resolve such resource conflict among HTPs. Since preemption involves the overhead of selecting CRs to be preempted and then deallocating the resources given to those CRs, excessive preemption adversely affects the performance of the network. Therefore, in this work, we utilized bandwidth splitting as a solution to resolve resource conflict among HTPs under such a shared environment in EONs. Moreover, an integrated solution consisting of splitting and preemption is also proposed. We refer to this new integration as flow-based preemption. Our simulation results demonstrate that bandwidth splitting-based heuristics yield significant improvement in terms of the amount of bandwidth accepted in the network, link and node utilization ratio, number of transponders utilized and the amount of bandwidth dropped due to preemption. Moreover, the flow-based preemption approach is proved to be superior in performance amongst all proposed strategies.

     

CP2EH: a comprehensive privacy-preserving e-health scheme over cloud

The Journal of Supercomputing - In the Attribute-Based Encryption (ABE) scheme, patients encrypt their electronic health record (EHR), attach the appropriate attributes with it, and outsource them...