Cross spectral iris recognition for surveillance based applications

Multimedia Tools and Applications - Human iris has been explored as one of the most promising biometric traits since last many years. This paper presents a new ingenious feature extraction approach...     

Progress in deep-UV photoresists

Higher resolution can be achieved in lithography by decreasing the wavelength of the exposure source. However, resist material and their processing are also important when we move to a shorter wavelength lithography technology. This paper reviews the recent development and challenges of deep-UV photoresists and their processing technology.     

Creative practices in the design studio culture: collaboration and communication

For the purpose of developing collaborative support in design studio environments, we have carried out ethnographic fieldwork in professional and academic product design studios. Our intention was to understand design practices beyond the productivity point of view and take into account the experiential, inspirational and aesthetical aspects of design practices. Using examples from our fieldwork, we develop our results around three broad themes by which design professionals support communication and collaboration: (1) use of artefacts, (2) use of space and (3) designerly practices. We use the results of our fieldwork for drawing implications for designing technologies for the design studio culture.     

Free-living inferential modeling of blood glucose level using only noninvasive inputs

The goal of this work is to present a causation modeling methodology with the ability to accurately infer blood glucose levels using a large set of highly correlated noninvasive input variables over an extended period of time. These models can provide insight to improve glucose monitoring, and glucose regulation through advanced model-based control technologies. The efficacy of this approach is demonstrated using real data from a type 2 diabetic (T2D) subject collected under free-living conditions over a period of 25 consecutive days. The model was identified and tested using eleven variables that included three food variables as well as several activity and stress variables. The model was trained using 20 days of data and validated using 5 days of data. This gave a fitted correlation coefficient of 0.70 and an average absolute error (AAE) (i.e., the average of the absolute values for the measured glucose concentration minus modeled glucose concentration) of 13.3 mg/dL for the validation data. This AAE result was significantly better than the subject’s personal glucose meter AAE of 15.3 mg/dL for replicated measurements.     

Virtual modeling of an ankle foot orthosis for correction of foot abnormality

Clubfoot is a challenging structural foot abnormality in babies and generally occurs at birth or during childhood. Due to this the abnormal posturing of the foot causes the babies to turn the ankle inward and walk along the outside edges of the foot. In medical science it is known as “congenital talipes equino varus” (CTEV). Computer modeling of prosthesis and orthosis is a perspective method for optimal design and gait is a terminology related to walking patterns of human subject.     

A Survey of UAS Technologies for Command, Control, and Communication (C3)

The integration of unmanned aircraft systems (UAS) into the National Airspace System (NAS) presents many challenges including airworthiness certification. As an alternative to the time consuming process of modifying the Federal Aviation Regulations (FARs), guidance materials may be generated that apply existing airworthiness regulations toward UAS. This paper discusses research to assist in the development of such guidance material. The results of a technology survey of command, control, and communication (C3) technologies for UAS are presented. Technologies supporting both line-of-sight and beyond line-of-sight UAS operations are examined. For each, data link technologies, flight control, and air traffic control (ATC) coordination are considered. Existing protocols and standards for UAS and aircraft communication technologies are discussed. Finally, future work toward developing the guidance material is discussed.     

Development of real-time reference evapotranspiration at the regional scale using satellite-based observations

Real-time data of reference evapotranspiration (ET₀) at different space-time scales are essential to regional agricultural drought assessment, water accounting at the watershed to basin scale, and provide irrigation advisory to farmers. Here, we present a data-fusion approach that integrates satellite-based insolation product (8 km) from an Indian geostationary satellite (Kalpana-1) sensor (VHRR; Very High Resolution Radiometer) and high-resolution (~ 5 km) short-range weather forecast into an FAO56 model based on the classical Penman–Monteith (P-M) formulation. Five year (2009–2013) mean monthly estimates from the daily ET₀ product over the Indian landmass were found to vary between 10 and 350 mm. It increased from January to May (70–350 mm), followed by a decrease to reach the lowest in November (10–140 mm), thus typically showing unimodal distribution. The comparison of daily space-based and station-based estimates (at six ground stations) produced a root mean square deviation (RMSD) ranging from 21% to 38% for 977 paired data sets with the correlation coefficient (r) varying from 0.32 to 0.82. The error was reduced from 25% to 10% with an increase in ‘r’ from 0.43 to 0.98 for daily to 10 day summation period. Spatial grid-to-grid comparison of monthly ET₀ estimates with Global Data Assimilation System (GDAS) potential evapotranspiration (PET) showed RMSD within a range of 1.4–18.4% for most of the months, except for two. Further ET₀ analysis over normal and drought years showed that it could be used for comprehensive drought assessment with other existing indicators.     

Correlation between the milling time and hydrogen storage properties of ZrCrFe ternary alloy

Laves phases with AB₂ compositions are common type of topologically close packed structure. Furthermore, lave phases are capable of dissolving considerable amounts of ternary alloying additions. ZrCr₂ crystallized in the hexagonal C14 type of structure is one of interesting candidate among them, but it is not used as storage compound due to its excessive stability, at 323 K the equilibrium pressure is only 1.2 kPa. However the substitution of chromium by other elements can modify the crystal structure, the hydriding capacity and dissociation pressure of hydrogen. In this work Fe has been chosen as a substitute material for Cr and ZrCrFe ternary alloy is prepared using arc furnace. The mechanical alloying process has been introduced to produce nanocrystalline material. This paper presents comprehensive study on structural aspects of ball milled ZrCrFe alloy. On comparison of the XRD data, the broadening was found in the peak width with the increase of milling time which is clear indication of refinement of crystallite size. This refinement could also be confirmed from the SEM analysis also. PCT measurements were performed for a temperature range 303 K–373 K.     

Hydrogen storage properties of Mg2Ni affected by Cr catalyst

The effect of Cr as a catalyst in different proportions was investigated to monitor the hydrogen storage properties of Mg₂Ni including their thermodynamic aspects. The P–C–T isotherms for absorption/desorption were measured at 225 °C, 250 °C, 275 °C and 300 °C temperatures. A significant increment in the plateau pressures at different temperature was observed, which shows the positive impact of Cr content in the formation of less stable hydrides. The active sites produced by the ball milling may be the reason for the formation of less stable hydrides. Decrements in the storage capacity with the Cr content were attributed to the formation of MgNi₂ phase which does not absorb hydrogen at the employed temperature-pressure conditions. XRD and SEM technique were used to identify the structural and morphological changes induced by the hydrogenation cycles.     

On the dynamics of tapered vibro-impacting cantilever with tip mass

This paper explores nonlinear dynamic behavior of vibro-impacting tapered cantilever with tip mass with regard to frequency response analysis. A typical frequency response curve of vibro-impacting beams displays well-known resonance frequency shift along with a hysteric jump and drop phenomena. We did a comprehensive parametric analysis capturing the effects of taper, tip-mass, stop location, and gap on the non-smooth frequency response. Analysis is presented in a non-dimensional form useful for other similar cases. Simulation results are further validated with corresponding experimental results for a few cases. Illustrative comparison of simulation results for varying parameters brings out several interesting aspects of variation in the nonlinear behavior.