High energy storage and ultrafast discharge in NaNbO3-based lead-free dielectric capacitors via a relaxor strategy

Dielectric capacitors with decent energy storage and fast charge-discharge performances are essential in advanced pulsed power systems. In this study, novel ceramics (1-x)NaNbO₃-xBi(Ni_2/3Nb_1/3)O₃(xBNN, x = 0.05, 0.1, 0.15 and 0.20) with high energy storage capability, large power density and ultrafast discharge speed were designed and prepared. The impedance analysis proves that the introducing an appropriate amount of Bi(Ni_0·5Nb_0.5)O₃ boosts the insulation ability, thus obtaining a high breakdown strength (E_b) of 440 kV/cm in xBNN ceramics. A high energy storage density (W_total) of 4.09 J/cm³, recoverable energy storage density (W_rec) of 3.31 J/cm³, and efficiency (η) of 80.9% were attained in the 0.15BNN ceramics. Furthermore, frequency and temperature stability (fluctuations of W_rec ≤ 0.4% over 5–100 Hz and W_rec ≤ 12.3% over 20–120 °C) were also observed. The 0.15BNN ceramics exhibited a large power density (19 MW/cm³) and ultrafast discharge time (~37 ns) over the range of ambient temperature to 120 °C. These enhanced performances may be attributed to the improved breakdown strength and relaxor behavior through the incorporation of BNN. In conclusion, these findings indicate that 0.15BNN ceramics may serve as promising materials for pulsed power systems.     

Modeling and performance evaluation of a cellular mobile network

An analytic model of cellular mobile communications networks with instantaneous movement is investigated in this paper. This cellular mobile network is showed to be equivalent to a queueing network and furthermore the equilibrium distribution of this cellular mobile network is proved to have a product form. The explicit expressions for handoff rates of calls from one cell to another, the blocking probability of new calls and handoff calls are then obtained. Actual call connection time (ACCT) of a call in this cellular mobile network is characterized in detail, which is the total time a mobile user engages in communications over the network during a call connection and can be used to design appropriate charging schemes. The average ACCT for both complete call and incomplete call, as well as the probability for a call to be incomplete or complete, are derived. Our numerical results show how the above measures depend on the new call arrival process for some specific reserved channels numbers in each cell. The results presented in this paper are expected to be useful for the cost analysis for updating location and paging in cellular mobile network.     

液压集成块校核软件的编制和应用

本文叙述了液压集成块校核软件的编制思想和方法，并重点介绍了编制过程中所使用的相关技术，同时给出部分源程序。     

氨气提工艺尿素生产中操作的改进

中原大化集团公司尿素装置在操作上使用的是Ｓｎａｍ公司提供的尿素操作手册 ,在运行过程中 ,发现有许多地方与实际状况出入很大 ,经过不断的总结经验 ,并在工艺操作中进行改进、优化 ,使装置达到安全、稳定、经济运行的目的。1　二氧化碳压缩机操作方式的改进二氧化碳压缩机自开车以来 ,防喘振系统一直未投用。由于Ｓｎａｍ公司提供的防喘振曲线富裕度较大 ,操作人员对实际喘振点不清楚 ,正常生产中转速控制较高 ,操作盲目性很大 ,在 1 0 0 %负荷下 ,防喘振阀仍有 1 0 %左右的开度 ,造成蒸气消耗偏高。1 999- 0 3- 31 ,对二氧化碳压缩机各…     

PVDF中空纤维滤膜的形态结构

用Ｌ－Ｓ相转换法制备了聚偏氟乙烯（ＰＶＤＦ）中空纤维不对称滤膜。铸膜液由聚合物、溶剂和添加剂组成。用电子显微镜（ＳＥＭ）考察了聚合物浓度、添加剂用量及种类对膜形态结构的影响。实验结果表明，聚合物浓度对膜形态结构有显著影响，当铸膜液中聚合物浓度较低时，无论用什么种类添加剂，都能形成大、且多的孔，但孔的形状随添加剂不同而异。当恒定聚合物浓度时，添加剂的用量对膜形态结构有很大的影响，但孔的大小及多少与添加剂含量的多少不成正比。     

纳米钛酸盐催化合成碳酸二正丁酯

以廉价的偏钛酸为原料,采用水热法和乙醇热法制备了纳米钛酸盐(简称钛酸盐),并对其进行了X射线粉末衍射和X射线光电子能谱表征。考察了钛酸盐的种类、制备方法、晶型对催化碳酸二甲酯(DMC)与正丁醇酯交换反应的影响。实验结果表明,乙醇热法比水热法制备的钛酸盐粒径小;对于不同的钛酸盐,随钛酸盐碱性的增强,催化活性提高,但由于三价钛的存在,钛酸锂对产物碳酸二正丁酯(DBC)的选择性低于钛酸钡;钛酸钾的催化活性最高,DMC转化率达到65%,DBC选择性达到100%,DBC收率达到65%,并在5次循环使用过程中,催化性能稳定;对于同种钛酸盐,催化活性随粒径的增加而减小;对于钛酸钡,立方相结构的催化活性优于四方相结构。     

精品课程教学录像的建设现状分析与建议

教学录像是精品课程建设的重要内容之一。为了开发集教学性、科学性、技术性与艺术性于一体的精品课程教学录像,针对精品课程教学录像的性质,参照其上网技术指标及网上浏览的特点,对其建设现状进行分析,并提出了精品课程教学录像建设的建议。     

基于信任机制的无线传感器网络可靠传输路由协议

在无线传感器网络中,针对异常事件监测时会出现大量数据发送引起网络拥塞、数据包无法可靠传输的问题,提出一种基于信任机制的可靠传输路由协议（RTRPT）。该协议提出了梯度分簇模型以选取簇头节点。在无异常事件发生时,通过转发能量阈值找出传输数据的邻居节点,进行数据传输。同时对这些节点进行转发概率与历史信任度计算得到直接信任度,再通过这些节点交互间接评价得到间接信任度。将直接信任度、间接信任度、距离度量和剩余能量作为评价指标,量化后通过熵权法得到邻居节点的综合信任。在异常事件发生时,节点仅需选择综合信任度最大的邻居节点作为转发节点,建立路由路径。使用OMNeT++进行仿真验证,RTRPT与TSRP、ESRT相比,在传输大量数据包时节点丢包率分别降低69.4%、52.7%;节点传输延迟分别降低53.6%、34.8%;网络生命周期分别延长32.5%、15.7%。仿真结果表明,RTRPT能有效减少丢包、降低传输延迟、延长生命周期。     

含碘水源先氯后氨消毒中副产物生成特性研究

以含碘水为研究对象,探究了先氯后氨工艺的THM4与I-THMs生成特性,并探究了该工艺的关键影响因子——氯接触时间、溴碘比、pH,同时以CTI与GTI为指标对其进行毒性评价,为水厂工艺调节提供理论依据.其中,先氯后氨工艺的总T H Ms生成量介于氯胺消毒与自由氯消毒之间,并且随着氯接触时间的增加,生成的CHCl3增加了26.5％,而I-THMs减少了58.7％;随着溴碘比的增加,溴代率和生成的THM4呈上升趋势而碘代率和I-THMs呈下降趋势;溴碘共存时,该工艺受pH影响复杂,在pH=6时产生的THMs总量最少.从毒性方面进行评价,先氯后氨工艺的毒性介于氯化和氯胺化消毒之间,30 min为比较合适的氯接触时间,此时与pre-NH2 Cl相比,细胞毒性和基因毒性分别减少了79.0％和53.4％;在溴碘比为3:1时产生的毒性最低.     

Image cipher using image filtering with 3D DNA-based confusion and diffusion strategy

Neural Computing and Applications - In this paper, an image cipher is presented based on DNA sequence operations, image filtering and memrisitve chaotic system. Firstly, plain image is preprocessed...