微机械可调谐滤波器的研制

利用 Ga As/Al Ga As分布反馈 Bragg反射镜在 Ga As衬底上制作了一个微机械的调谐滤波器 .该器件在 7V调谐电压下调谐范围达28nm     

航空齿轮表面硬化层断裂性能研究

按照航空齿轮的具体工艺过程，对材料12Cr2Ni4A的拉伸试样和断裂试样进行设计和加工，通过三点弯曲实验，重点研究了齿轮材料硬化层的硬度分布，硬化试样拉伸力学性能参数和断裂性能参数，实验结果表明，所采用试样的加工工艺方案是可行的，所获得的Kc基本反映我国航空硬化齿轮材料的断裂性能特征，为定量预测航空硬化齿轮疲劳寿命提供实验和理论分析的依据。     

基于两电极体系的水质检测分析平台设计

为实现对水质的多参数检测,设计了一个基于两电极体系的水质检测分析平台。该检测平台通过最小化极化电流的思想,采用辅助电极面积远大于工作电极的电极参数,设计了基于两电极体系的集成电极和软硬件系统,摈弃了传统三电极体系的参比电极,同时克服了传统三电极体系容易污染样品的缺点,能实现电化学工作站的诸多功能。本研究在该检测平台上开展了水样的电导率(EC)、pH和重金属浓度的检测研究,获得了较好的结果,可用于实验室及工业现场的水质监测。     

磷酸氢钙气流干燥方法的优化

论述了改进单级气流干燥器以干燥磷酸氢钙的新方法，解决了易粘结物料不便干燥的问题。     

逐层钻孔法测试多层材料残余应力数值研究

以典型的复合层状材料热障涂层为例,利用有限元分析软件对热障涂层的松弛系数进行了数值计算分析研究.介绍了逐层钻孔法有限元三维模拟分析具体步骤.通过计算分析,分别研究了TBC层微观孔形和BC层厚度及钻孔进给量对系数的影响,从而找出孔型变化和厚度增加对对系数影响的变化规律.     

采用双联熔炼技术的灰铸铁熔炼材料的选用

总结了双联熔炼工艺中灰铸铁熔炼材料的要求和特点,并针对使用过程中容易出现的问题进行了分析,同时分析了熔炼材料对铸件性能可能造成的影响,为合理选用熔炼材料提供了依据。     

Adaptive target recognition

Target recognition is a multilevel process requiring a sequence of algorithms at low, intermediate and high levels. Generally, such systems are open loop with no feedback between levels and assuring their performance at the given probability of correct identification (PCI) and probability of false alarm (Pf) is a key challenge in computer vision and pattern recognition research. In this paper, a robust closed-loop system for recognition of SAR images based on reinforcement learning is presented. The parameters in model-based SAR target recognition are learned. The method meets performance specifications by using PCI and Pf as feedback for the learning system. It has been experimentally validated by learning the parameters of the recognition system for SAR imagery, successfully recognizing articulated targets, targets of different configuration and targets at different depression angles.     

Stochastic models for recognition of occluded targets

Recognition of occluded objects in synthetic aperture radar (SAR) images is a significant problem for automatic target recognition. Stochastic models provide some attractive features for pattern matching and recognition under partial occlusion and noise. In this paper, we present a hidden Markov modeling based approach for recognizing objects in SAR images. We identify the peculiar characteristics of SAR sensors and using these characteristics we develop feature based multiple models for a given SAR image of an object. The models exploiting the relative geometry of feature locations or the amplitude of SAR radar return are based on sequentialization of scattering centers extracted from SAR images. In order to improve performance we integrate these models synergistically using their probabilistic estimates for recognition of a particular target at a specific azimuth. Experimental results are presented using both synthetic and real SAR images.     

碳化硅木质陶瓷复合装甲结构设计及数值模拟优化

根据车辆的防护要求,以陶瓷复合装甲防弹机理为依据,进行碳化硅木质陶瓷/UHMWPE纤维复合装甲结构设计和数值模拟优化,并制备碳化硅木质陶瓷复合装甲,进行实弹打靶验证防弹性能。在确保陶瓷复合装甲面密度为38 kg/m2的前提下,以子弹侵彻深度为评价标准,以碳化硅木质陶瓷防弹片的厚度、形状、尺寸和布置位置为研究因素,设计了四因素三水平的正交模拟优化方案,利用有限元软件ANSYS/LS-DYNA对所设计的复合装甲的防弹性能进行数值模拟,并比对数值模拟结果与实弹打靶试验结果。结果表明,针对北约AEP-55 STANAG 4569 Ⅱ级防护标准,本文所设计的陶瓷复合装甲最优化的结构形式为8mm厚的碳化硅木质陶瓷防弹面板、13.7mm厚的UHMWPE纤维防弹背板,防弹面板采用面积为4900mm2的正六边形碳化硅木质陶瓷防弹片拼接而成;碳化硅木质陶瓷防弹片对防弹性能的主次影响因素为：布置位置＞厚度＞尺寸＞形状。     

铁矿石浮选过程中矿物的交互影响及机理研究

复杂矿石浮选体系中矿物间会产生交互影响,研究了在油酸钠浮选体系中,不同粒级的磁铁矿、赤铁矿和石英的交互影响,并讨论了其机理。结果表明:-45+18μm粒级磁铁矿会显著降低赤铁矿的回收率,主要是因为微细粒级矿物消耗了大量捕收剂;-18μm粒级磁铁矿能够大幅度降低石英的回收率,其原因是-18μm粒级磁铁矿在石英粗颗粒表面发生了罩盖;不同粒级磁铁矿,对赤铁矿和石英混合矿浮选会有不同的影响,由于-106+18μm粒级磁铁矿被抑制进入浮选精矿,使浮选精矿铁品位略有提高,-18μm粒级磁铁矿降低浮选精矿铁品位与矿物罩盖有关。