Isolation of antimicrobial agent from the marine algae Cystoseira hakodatensis

Cystoseira hakodatensis is an unutilised brown algae belonging to family Sargassaceae. A crude methanol extract from the algae showed inhibitory effects on the growths of Bacillus cereus and Bacillus licheniformis. To isolate the major antimicrobial agent, a sequential active‐guided isolation procedure was applied: liquid–liquid extraction, column chromatography and bio‐autography. A marked antimicrobial agent (active α) was isolated in hydrophobic fraction and was determined to phenolics without carbohydrates and proteins by phytochemical test. Regarding the antimicrobial potential, the isolated active α showed better inhibitory effects against B. cereus and B. licheniformis at 2 and 4 times of lower concentrations (62.5 and 31.3 μg mL^?1) in comparison with epigallocatechin gallate. These results showed that C. hakodatensis is a potential source of antimicrobial agent capable of preventing the growth of the two bacteria.     

Characterization of anisotropic gas permeability and thermomechanical properties of highly textured porous alumina

Porous alumina with a highly textured microstructure was fabricated by pulse electric current sintering (PECS) using alumina platelets. Highly oriented porous alumina with a porosity of 3%–50% was obtained by a pressure-controlled method of PECS. The properties of the highly textured porous alumina were measured in two directions. The nitrogen gas permeance and thermal conductivity at room temperature were higher in the direction along the platelet length due to the higher continuity of pores and the connectivity of alumina platelets, respectively. The anisotropy of the thermal conductivity at room temperature was investigated and explained by the effect of grain size of platelets as well as morphology and orientation of pores. The bending strength was higher with the loading direction along the platelet thickness. The thermal shock strength was clearly different in the two directions. The difference in the thermal shock strength was investigated by the measurement of properties and thermal stress analysis.     

Combustion synthesis of AlN doped with carbon and oxygen

Carbon-and-oxygen-doped AlN specimens were prepared by combustion synthesis using Al, graphite, and AlN. Graphite addition changed the product color from white to blue. By XRD, the lattice constant increased slightly with increasing carbon content. Blue AlN powder was synthesized with a molar ratio of the diluent AlN of 0.2-0.5 with a fixed graphite content of 0.05. At an AlN molar ratio exceeding 0.6, carbon was not successfully incorporated due to the lower reaction temperature. Calcination at 800°C in air removed residual graphite without changing the crystal structure or product color. Oxygen, nitrogen, and carbon analyses revealed that blue AlN powders contained 0.45-0.54 mass% carbon and 1.4-1.6 mass% oxygen, while the undoped AlN contained 0.021 mass% carbon and 0.94 mass% oxygen. The origin of the white-to-blue color change was investigated via reflection measurements. Blue AlN exhibits an absorption peak at 634 nm (1.96 eV). From first-principles electronic structure calculations, the C-doped AlN and carbon-and-oxygen-doped AlN with a 1:1 ratio could be classified as p-type, whereas the O-doped AlN and 1:3 carbon-and-oxygen-doped AlN were n-type. One reason for the absorption peak at 634 nm may be a transition from the conduction band to an upper unoccupied state. These results suggest the possible control of optical and electronic properties of AlN via carbon-and-oxygen doping.     

Aqueous One-pot Synthesis of Glycopolymers by Glycosidase-catalyzed Glycomonomer Synthesis Using 4,6-Dimetoxy Triazinyl Glycoside Followed by Radical Polymerization

Glycopolymers have attracted increased attention as functional polymeric materials, and simple methods for synthesizing glycopolymers remain needed. This paper reports the aqueous one-pot and chemoenzymatic synthesis of four types of glycopolymers via two reactions: the β-galactosidase-catalyzed glycomonomer synthesis using 4,6-dimetoxy triazinyl β-D-galactopyranoside and hydroxy group-containing (meth)acrylamide and (meth)acrylate derivatives as the activated glycosyl donor substrate and as the glycomonomer precursors, respectively, followed by radical copolymerization of the resulting glycomonomer and excess glycomonomer precursor without isolating the glycomonomers. The resulting glycopolymers bearing galactose moieties exhibited specific and strong interactions with the lectin peanut agglutinin as glycoclusters.     

Effects of the thermal history on the hydraulic properties of slags

Glasses with two composition in the CaO---Al₂O₃---SiO₂ system were prepared with different cooling conditions. Glass A has a eutectic composition of wollastonite-gehlenite-rankinite and glass B has that of wollastonite-gehlenite-anorthite. The effects of the thermal history on the structure and hydraulic properties were discussed. Effects of cooling rate on the physical and chemical properties of glasses are found to be different with chemical composition of glass. Cooling rate affects the hydraulic reactivity and crystallization temperature, especially in glass A, but scarcely affects the physical properties such as chemical shift of AlK and surface basicity of the glass.     

Operation of superconducting fault current limiter using vacuum interrupter driven by electromagnetic repulsion force for commutating switch

Using conventional high‐temperature superconducting wire, a model superconducting fault current limiter (SFCL) is made and tested. Solenoid coil using Bi2223 silver sheath wire is so made that inductance is as small as possible and a vacuum interrupter is connected in series to it. A conventional reactor coil is connected in parallel. When the fault current flows in this equipment, superconducting wire is quenched and current is transferred into the parallel coil because of voltage drop of superconducting wire. This large current in parallel coil actuates magnetic repulsion mechanism of vacuum interrupter. Due to opening of vacuum interrupter, the current in superconducting wire is broken. By using this equipment, current flow time in superconducting wire can be easily minimized. On the other hand, the fault current is also easily limited by large reactance of parallel coil. © 2008 Wiley Periodicals, Inc. Electr Eng Jpn, 164(1): 52–61, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20315     

Rapid detection cytomegalovirus pneumonia in recipients of bone marrow transplant: evaluation and comparison of five survey methods for bronchoalveolar lavage fluid

To detect cytomegalovirus-associated interstitial pneumonia (CMV-IP) in recipients of BMT in its earliest stage, five CMV methods were assessed for their usefulness using bronchoalveolar lavage fluid as the test specimen. Of the 43 cases enrolled in the study, PCR was positive in 12 cases, shell vial in eight, culture in eight and cytology in three. There were no positive cases in in situ hybridization. Based on this result, the 43 cases were classified into four groups: Group 1, three cases: positive in PCR, shell vial and cytology; Group 2, five cases: positive in PCR and shell vial; Group 3, four cases: positive only in PCR; and Group 4, 31 cases: negative in all CMV tests. Cases in Group 1 were judged as having the highest risk of overt CMV-IP. They were successfully treated with a combination of ganciclovir and immunoglobulin. Group 2 was diagnosed as having active CMV infection and ganciclovir monotherapy was effective for these patients. Groups 3 and 4 were not given anti-CMV therapy, but they were free from CMV-related manifestations throughout the study. The sensitivity and specificity of each survey method for the detection of Groups 1 and 2 were 1.0 and 0.89 in PCR, 1.0 and 1.0 in shell vial, 0.88 and 1.0 in culture, and 0.38 and 1.0 in cytology. Similarly, the positive and negative predictive values were 0.67 and 1.0 in PCR, 1.0 and 1.0 in shell vial, 1.0 and 0.97 in culture, and 1.0 and 0.88 in cytology. Thus, CMV survey on bronchoalveolar fluid was thought to be useful in detecting post BMT CMV-IP in its earliest stage.     

Non-atherosclerotic acute myocardial infarction

AIM: The aim of the study is to analyse the benefits and risks of PEE in patients, cared for by a team with many years experience. PATIENTS AND METHODS: From 16. 2. 1988 until 31. 12. 1993 246 PEEs (229 gastrostomies, 6 duodenostomies, 7 jejunostomies, 4 attempts) were performed on 234 patients (56% male, 44% female, mean age 68.3 years). 117 patients had tumorous and 117 neurological diseases. We used the pull technique with the Fresenius Freka PEG-system. Analysis was performed using a standardised documentation sheet which was filled out until the end of tube feeding. In total, we registered 39,678 days of tube feeding, 4513 of which were in hospitalized patients. RESULTS: The mean intubation time was 192.6 days (maximum 1496). In 8 cases, the tube could be explanted before the patient was discharged; 68 patients were discharged to a nursing home and 71 patients were allowed to go home. The tube-independent hospital lethality was 36.64%. A PEE-specific lethality had not been registered. Complications arose in a total of 37 patients (15.04%), 4 of which were severe (1.63%) Fifty-nine patients (25.43%) reported short-term feelings of ill health (vomiting, diarrhoea, pain). CONCLUSION: PEE is an effective and low-risk method of long-term nutrition. The advantages are simple insertion, safe handling by patients and relatives/nursing staff and the low cost.     

Three-dimensional motion of the upper cervical spine in rheumatoid arthritis

Rheumatoid arthritis frequently contributes to instability of the upper cervical spine. Rotational instability of the upper cervical spine was evaluated in rheumatoid arthritis patients using biplanar x-ray photogrammetry. Three-dimensional cervical motion and the instantaneous axis of rotation of the atlas relative to the axis were evaluated in normal and rheumatoid arthritis patients during axial rotation in the horizontal plane. Anterior atlantoaxial subluxation did not increase during axial head rotation in either the atlantoaxial subluxation or the vertical subluxation groups, while the instantaneous axes of rotation were distributed posteriorly in the dens in the RA-normal group, but were widely scattered in the atlantoaxial subluxation group.