改进的深度脱木素的硫酸盐蒸煮：第一部分 用硫化钠预处理的桉树硫酸盐蒸煮

用硫化钠水溶液预处理桉树，接着进行改进的深度脱木素硫酸盐蒸煮。结果表明，在１６０℃预处理后脱木素的选择性较常规硫酸盐蒸煮有显著提高，可得到低Ｋａｐｐａ值（约为１０）的浆而没有明显的强度损失。     

A note on octonionic support vector regression

This note presents an analysis of the octonionic form of the division algebraic support vector regressor (SVR) first introduced by Shilton A detailed derivation of the dual form is given, and three conditions under which it is analogous to the quaternionic case are exhibited. It is shown that, in the general case of an octonionic-valued feature map, the usual "kernel trick" breaks down. The cause of this (and its interpretation) is discussed in some detail, along with potential ways of extending kernel methods to take advantage of the distinct features present in the general case. Finally, the octonionic SVR is applied to an example gait analysis problem, and its performance is compared to that of the least squares SVR, the Clifford SVR, and the multidimensional SVR.     

Exploring the methods on improving CH4 delivery performance to surpass the Advanced Research Project Ageney-Energy target

CH_4 storage associated with adsorbed natural gas(ANG) technology is an issue attracting great concern.Following the Advanced Research Project Agency-Energy(ARPA-E) targeted deliverable capacity of 315 cm~3·cm~(-3)(STP), hundreds of thousands of materials have been experimentally or theoretically evaluated,while the best results still show a 35% gap from the target. Moreover, recent theoretical research reveals that the target is beyond the possibility that real materials can be designed. To get rid of the awkward situation, we make attempts on investigating the CH_4 delivery performance under other operation conditions. Methods of raising the discharge temperature(to infinite high) or elevating the storage pressure(to 25 MPa) have been proved to show limited effectiveness. In this work, it is found that the ARPA-E target can be achieved by using a decreasing storage temperature strategy. By taking 280 Co RE(computation-ready, experimental) COFs(covalent organic frameworks) as ANG materials, when reduce the storage temperature to 190.6 K, the highest deliverable capacity can reach 392 cm~3·cm~(-3)(STP), and16.1% Co RE COFs can surpass the target. The target is also achievable when storage at 220 K. Structure performance relationships study shows strong correlation between deliverable capacity and void fraction. Hence, 120 hypothetical COFs are generated to ascertain the optimum void fraction. In addition,the performance of 2 D-COFs can be greatly enhanced by increasing the interlayer spacings, e.g. CH_4 deliverable capacity(storage at 190.6 K) of ATFG-COF can be improved from 239 to 411 cm~3·cm~(-3)(STP) when interlayer spacing is enlarged to 1.65 nm.     

Comprehensive assessment on dynamic roof instability under fractured rock mass conditions in the excavation disturbed zone

The damage process of fractured rock mass showed that the fracture in rocks induced roof collapse in Yangchangwan Coal Mine,China.The rock mass was particularly weak and fractured.There occurred 6 large-scale dynamical roof falls in the excavation disturbed zone (EDZ) with the collapsing volume of 216 m3.First,the field detailed geological environment,regional seismic dy-namics,and dynamic instability of roadways were generally investigated.Second,the field multiple-index monitoring measurements for detecting the deep delamination of the roof,convergence deformation,bolt-cable load,acoustic emission (AE) characteristic pa-rameters,total AE events,AE energy-releasing rate,rock mass fracture,and damage were arranged.Finally,according to the time-space-strength relations,a quantitative assessment of the influence of rock-mass damage on the dynamic roof instability was accomplished.     

Simulation and experiment of vortex transport properties in a Type Ⅱ superconductor with grain boundary

We firstly described a simulation model to investigate the influence of grain boundary(GB)on the vortex transport properties in YBCO film.It is found that the size of inhomogeneous area caused by GB as well as the average velocity in transverse and longitudinal directions shows an angular dependence when the angle between the GB and the sample edge varies.We have also studied the impact of magnetic field intensity on dynamic behavior of vortex lattice and found that a lower vortex density makes it difficult for the vortex lattice to transfer from pinning state to flow state.As the magnetic field is decreased beyond a critical value,sharp jumps and strong fluctuations were observed in the I-V curve.Finally,we conducted measurements on a thin film YBa2Cu3O7 with an individual artificial grain boundary to support the simulation process.     

TWO KINDS OF VARIANT IN SHAPE MEMORY MATERIAL

In shape memory materials,that have been trained to have a two way shape memory effect(TWSM),themartensitic variants are classified into two groups,i.e.,preferentially oriented variants and self-accommodatingvariants.Applied stress may promote or constrain the transition of preferentially oriented variants and so changetransformation temperatures but has no essential effect on self-accommodating variants.According to the pointof view mentioned above,some experimental phenomena during thermocycling of a TWSM device may be ex-plained,such as the absence of synchronization between the plot of resistance change.temperature and the plotof memory strain vs.temperature.     

COUPLED SIMULATION OF 3D ELECTRO-MAGNETO-FLOW FIELD IN HALL-HEROULT CELLS USING FINITE ELEMENT METHOD

Two full 3D steady mathematical models are developed by finite element method （FEM） to calcalate coupled physics fields. the electro-magnetic model is built and solved first and so is the fluid motion model with the acquired electromagnetic force as source body forces in Navier-Stokes equations. Effects caused by the ferromagnetic shell, busbar system around, and open boundary problem as well as inside induced current were considered in terms of the magnetic field. Furthermore, a new modeling method is found to set up solid models and then mesh them entirely with so-called structuralized grids, namely hex-mesh. Examples of 75kA prebaked cell with two kinds of busbar arrangements are presented. Results agree with those disclosed in the literature and confirm that the coupled simulation is valid. It is also concluded that the usage of these models facilitates the consistent analysis of the electric field to magnetic field and then flow motion to the greater extent, local distributions of current density and magnetic flux density are very much dependent on the cell structure, the steel shell is a shield to reduce the magnetic field and flow pattern is two dimensional in the main body of the metal pad.     

PEJA: Progressive Energy-Efficient Join Processing for Sensor Networks

Sensor networks are widely used in many applications to collaboratively collect information from the physical environment. In these applications,the exploration of the relationship and linkage of sensing data within multiple regions can be naturally expressed by joining tuples in these regions. However,the highly distributed and resource-constraint nature of the network makes join a challenging query. In this paper,we address the problem of processing join query among different regions progressively and energy-efficiently in sensor networks. The proposed algorithm PEJA(Progressive Energy-efficient Join Algorithm) adopts an event-driven strategy to output the joining results as soon as possible,and alleviates the storage shortage problem in the in-network nodes. It also installs filters in the joining regions to prune unmatchable tuples in the early processing phase,saving lots of unnecessary transmissions. Extensive experiments on both synthetic and real world data sets indicate that the PEJA scheme outperforms other join algorithms,and it is effective in reducing the number of transmissions and the delay of query results during the join processing.     

Use of the fast Fourier transform method for analyzing linear and equispaced Fizeau fringes

The Fourier transform method is applied to analyze the initial phase of linear and equispaced Fizeau fringes. We develop an algorithm for high-precision phase measurement by using the Fourier coefficient that corresponds to the spatial frequency of the Fizeau fringes, and we describe methods for determining the fringe carrier frequency. Errors caused by carrier frequency fluctuation and data truncation are studied theoretically and by computer simulation. To demonstrate the method we apply it to the real-time calibration of a piezoelectric transducer mirror in a Twyman-Green interferometer.     

调压室断面积对调节系统稳定域的影响

运用有调压室的水轮机调节系统数学模型，引入无量纲参数，详细分析了调压室断面积对调节系统稳定域的影响．研究表明，水电站有压输水系统总的水流惯性对调节系统的稳定性是不利的．其校正由调速器和调压室共同完成．调压室断面积对压力管道的水流惯性不起校正作用，须由调速器独自承担．而调速器的缓冲作用却能帮助调压室校正压力隧洞的水流惯性，从而减小调压室稳定断面积．