Theoretical investigation of intrinsic point defects and the oxygen migration behavior in rare earth hafnates

In this work, the composition-dependent point defect types and formation energies of RE₂Hf₂O₇ (RE = La, Ce, Pr, Nd, Pm, Sm, Eu and Gd) as well as the oxygen diffusion behavior are systematically investigated by first-principles calculations. The possible defect reactions and dominant defect complexes under stoichiometric and non-stoichiometric conditions are revealed. It is found that O Frenkel pairs are the predominant defect in stoichiometric pyrochlore hafnates. Hf-RE cation anti-site defects, accompanied by RE vacancies and/or oxygen interstitials, are stable in the non-stoichiometric case of HfO₂ excess. On the other hand, RE-Hf anti-site defects together with oxygen vacancies and/or RE interstitials are preferable in the case of RE₂O₃ excess. The energy barriers for the migration along the V_O48f - V_O48f pathway of pyrochlore hafnates were calculated to be between 0.81 eV and 0.89 eV. Based on these results, a defect engineering strategy is proposed and the pyrochlore hafnates investigated here are predicted to exhibit potential oxygen ionic conductivity.     

Synthesis of nanopowders with low agglomeration by elaborating Φ values for producing Gd2O3-MgO nanocomposites with extremely fine grain sizes and high mid-infrared transparency

Refining ceramic microstructures to the nanometric range to minimize light scattering provides an interesting methodology for developing novel optical ceramic materials. In this work, we reported the fabrication and properties of a new nanocomposite optical ceramic of Gd₂O₃-MgO. The citric acid sol-gel combustion method was adopted to fabricate Gd₂O₃-MgO nanocomposites with fine-grain sizes, dense microstructures and homogeneous phase domains. Nanopowders with low agglomeration and improved sinterability can be obtained by elaborating Φ values. Further refining of the microstructure of the nanocomposites was achieved by elaborating the hot-pressing conditions. The sample sintered at 65 MPa and 1300 °C showed a quite high hardness value of 14.3 ± 0.2 GPa, a high transmittance of 80.3 %–84.7 % over the 3?6 μm wavelength range, due mainly to its extremely fine-grain size of Gd₂O₃ and MgO (93 and 78 nm, respectively) and high density.     

回转窑动态检测及托轮磨削的应用

我公司3#回转窑Φ4.8 m×74 m，三档支撑，带液压挡轮，斜度4％，设计产量5?000~6?000 t/d。回转窑运行过程中，筒体存在晃动现象，在窑尾密封处观察较为明显，晃动幅度约±20 mm，甚至导致三档托轮基础及周围栏杆也随之晃动。     

肠靶向海藻酸钙基微胶囊的制备及控释性能研究

利用毛细管共挤出技术结合静电吸附和仿生硅化的方法，制备了海藻酸钙-壳聚糖/精蛋白/二氧化硅(ACPSi)复合微胶囊。ACPSi复合微胶囊的平均粒径约3.18 mm，单分散性好，囊壁最外层的二氧化硅层可抑制其在肠液pH环境中的溶胀，增强囊的机械稳定性。将羟丙甲基纤维素邻苯二甲酸酯(HPMCP)肠溶微球作为释药“微阀门”，嵌入囊壁可以更好地控制微胶囊的释药行为。以吲哚美辛为模型药物，当药物浓度为22.5 mg/ml时，ACPSi载药微胶囊在pH 2.5模拟胃液中3 h时累计释药率仅为0.33%，而转移至pH 6.8模拟肠液中19 h时累计释药率为77.78%；囊壁嵌入HPMCP微球后，22 h时累计释药率可提高约4%。因此，该复合微胶囊具有良好的肠靶向作用和控释特性，作为口服肠靶向缓控释制剂具有良好的应用前景。     

全电动注塑机研究进展及在汽配电子行业中的应用

介绍了全电动注塑机的特色，综述了国内外全电动注塑机在精密注塑、智能注塑、高效注塑和绿色注塑方面的研究进展，并对全电动注塑机在汽配电子行业中的应用作了简单介绍。对双电机同步控制技术的逐渐成熟为全电动注塑机实现大型化提供了助力，全电动注塑机高效、精密、智能、节能、环保的优势在汽配电子行业显示了很好的应用前景。     

典型化工生产单元操作一体化实训室数字化课程学习系统建设

基于对典型化工生产单元操作一体化实训室数字化课程学习系统建设实践，将复杂且具有高度危险性的化工生产单元操作过程教学、培训等，构建成一个高度信息化的综合平台，利用视频、动画、微课、仿真等软硬件组成数字化的学习系统，即解决了学校资源、资金、场地、安全等的不足，方便学生随时随地学习，又解决了教师枯燥难教的困境，同时也解决了校内学资源碎片化、校际缺少共享等问题，为教学、培训、社会服务等提供便捷途径。     

与椭圆封头连接的N型固定管板计算

近年来,因化工生产工艺需求,管程侧与椭圆封头连接的N型管板特殊结构被广泛使用。结合GB/T 151—2014《热交换器》标准对管板进行计算,并对管板与壳体连接处的局部结构进行应力分析,得到了合理的计算结果,使设计文件更加完善,确保了设备安全运行。     

Synergistic flame retardant effects of activated carbon and molybdenum oxide in poly(vinyl chloride)

The synergistic effects of activated carbon (AC) and molybdenum oxide (MoO₃) in improving the flame retardancy of poly(vinyl chloride) (PVC) were investigated. The effects of AC, MoO₃ and their mixture with a mass ratio of 1:1 on the flame retardancy and smoke suppression properties of PVC were studied using the limiting oxygen index and cone calorimeter tests. It was found that the flame retardancy of the relatively cheaper AC was slightly weaker than that of MoO₃. In addition, the incorporation of AC and MoO₃ greatly reduced the total heat release and improved smoke suppressant property of PVC composites. When the total content of AC and MoO₃ was 10 phr, PVC/AC/MoO₃ had the lowest peak heat release rate and peak smoke production rate values of 173.80 kW m^?2 and 0.1472 m² s^?1, which represented reductions of 47.3 and 59.9%, respectively, compared with those of PVC. Furthermore, thermogravimetric analysis and gel content tests were used to analyze the flame retardant mechanism of AC and MoO₃, with results showing that AC could promote early crosslinking in PVC. Char residue left after heating at 500 °C was analyzed using scanning electron microscopy and Raman spectroscopy, and the results showed that MoO₃ produced the most compact char, with the smallest and most organized carbonaceous microstructures. © 2017 Society of Chemical Industry     

基于Delphi嵌入汇编数据采集程序的设计

实现嵌入式汇编技术就是直接把汇编语言的代码写到高级语言的代码中并一起进行编译,不需要独立的汇编系统和另外的连接步骤。嵌入式汇编技术在不同的高级语言中语法各不相同。文章主要给出了在Delphi环境中嵌入汇编的具体用法。采用嵌入式汇编技术对Intel8255和8254接口芯片的具体操作,以及介绍了数据采集软件的设计流程和程序的具体实现方法。     

三相交流电动机启动过程参数数值模拟

提出一种进行模拟计算电动机启动过程中各参数的新方法。利用电机运行理论,结合物体定轴转动定律,推导出电机运行参数随时间变化的函数关系式。将计算公式离散化后,对电机启动过程运行规律进行求解。实例计算了一种型号潜油三相电动机启动时电动机定子电流、转子电流、激磁电流、扭转力矩、转速参数及效率参数等随时间或转差率的变化规律,其变化曲线与试验结果基本一致,说明提出的计算方法是有效、正确、适用的。