对悬臂式单转子离心机械临界转速的分析

离心机械是石油、化工、采矿等行业的常用机械,在使用过程中常出现振动现象,从而减少机器的使用寿命。要使机器运转平稳,在机器设计时必须进行临界转速计算,以使机器运转工况避开其临界转速。通过对离心机械临界转速公式的研究,发现悬臂式单转子离心机械的临界转速中窄转子离心机械有1个临界转速,宽转子离心机械有2个临界转速。     

吉林省特大干旱灾害对粮食的影响及其对策

本文通过分析我省历史发生的特大干旱灾害事件，论述了不同时期特大干旱对粮食产量的严重影响。提出了21世纪特大干旱的研究与对策。     

吲哚美辛对荷瘤小鼠抗肿瘤作用机制的实验研究

用微观放射自显影技术及免疫组化法探讨了非甾体类抗炎药吲哚美辛(IN)对Lewis肺癌的生长抑制作用机制。结果显示:与对照组相比,实验组IN的抑瘤率为55.05%;IN可显著下调Bcl-2蛋白的表达(t=6.154,P<0.001),对Bax蛋白的表达没有明显影响(t=2.101,P>0.05)。放射自显影结果显示,在肿瘤细胞的细胞膜、细胞浆及细胞核中均有黑色银颗粒分布,且在用药后12 h时肿瘤组织中的平均银颗粒数高于4、7、243、6 h时。以上结果表明,IN可抑制Lewis肺癌的生长,其机制与下调抗凋亡蛋白Bcl-2的表达及降低Bcl-2/Bax的比值有关;IN可进入到肿瘤细胞内发挥抗肿瘤作用。     

mc-Si:H/c-Si solar cell prepared by PECVD

Hetero-junction solar cells with an mc-Si:H window layer were achieved. The open voltage is increased while short current is decreased with increasing the mc-Si:H layer's thickness of emitter layer. The highest of V oc of 597 mV has obtained. When fixed the thickness of 30 nm, changing the N type from amorphous silicon layer to micro-crystalline layer, the efficiency of the hetero-junction solar cells is increased. Although the hydrogen etching before deposition enables the c-Si substrates to become rough by AFM images, it enhances the formation of epitaxial-like micro-crystalline silicon and better parameters of solar cell can be obtained by implying this process. The best result of efficiency is 13.86% with the V oc of 549.8 mV, J sc of 32.19 mA·cm-2 and the cell's area of 1cm2.     

轧制生产线是提高硬合金板带产量和成材率的关键

对硬合金冷轧板带材的生产现状与市场前景进行了分析；结合生产实际，阐述了造成硬合金冷轧板带产量小、成材率低的原因；提出了提高其产量和成材率的措施。     

论企业战略创新

阐述了推动行业结构变革和企业战略创新的主要因素;接着指出企业战略创新的正确行为方式是:在资源配置时,视颠覆性创新为威胁,在创建新的商业模式时,则把它当作一个机会;最后提出了应对行业结构变革,推动企业战略创新的5项具体策略。     

浅谈会计准则与会计制度

介绍了会计准则与会计制度的联系 ,分析了二者的差别 ,认为会计准则取代会计制度是可能的 ,也是必然的。     

星型聚合物中间体环硅氧烷核的合成研究

以甲基二氯硅烷、四甲基四乙烯基环四硅氧烷(DVi4)为原料,采用硅氢加成反应合成了星型聚合物的中问体环硅氧烷核,并用红外光谱和核磁共振谱进行了表征.反应的最佳条件是:采用预先活化、反应温度72℃、催化荆与DVi4的量之比为1.0×10-4,反应转化率可达95%,且选择性很好,产物主要为β-加成产物.     

像全息的水下应用

基于开发海洋事业的需要，对如何拍摄好水中物体的全息图进行了详细的理论分析，并利用像全息的方法成功拍摄到了一系列富有工艺美感的水下物体的全息图。针对拍摄的全息图进行了细致的定性、定量分析，最后对仪器开发和应用前景作了初步的探讨。     

ANALYSIS OF SEEPAGE FLOW IN A CONFINED AQUIFER WITH A STANDING COLUMN WELL

The standing column well for ground source heat pump systems is a promising technology with high efficiency and environmental benefit, where groundwater is drawn from the bottom of a well and then re-injected to its top after transferring heat with heat pumps. Heat transfer analysis of great significance and aquifer involves complex problems. Determining the groundwater seepage flow is a precondition to solve the energy equation describing the heat transfer of the system. Only when piezometric head is obtained, the seepage velocity can be determined according to Darcy’s law. In this article the groundwater seepage flow in an axial symmetrical geometry was studied under the assumption that gross groundwater flow is neglected. An analytical solution of the groundwater seepage flow for a confined aquifer was acquired by using the integral transform method, which may provide a foundation for heat transfer analysis of the standing column well system.