Random poly(ε‐caprolactone‐L‐alanine) by direct melt copolymerization

A series of random polyesteramides (PEAs) with a range of molar composition from 90/10 to 50/50 were synthesized by direct melt polycondensation of ε‐caprolactone and l ‐alanine. Their structure was fully characterized by Fourier transform IR and NMR spectroscopy. The resulting copolymers are completely amorphous with the exception of PEA‐90/10 which possesses a semicrystalline structure. These PEAs present increasing glass transition temperatures at increasing l ‐alanine contents and exhibit fairly good thermal stability with 10% mass loss temperatures reaching 315 °C. © 2020 Society of Industrial Chemistry     

Compressive properties of pristine and SiC-Te-added MgB2 powders,green compacts and spark-plasma-sintered bulks

Pristine and (SiC+Te)-added MgB₂ powders, green and spark plasma sintered (SPS) compacts were investigated from the viewpoint of quasi-static and dynamic (Split-Hopkinson Pressure Bar, SHPB) compressive mechanical properties The amount of the additive (SiC+Te) was selected to be the optimum one for maximization of the superconducting functional parameters. Pristine and added MgB₂ show very similar compressive parameters (tan δ, fracture strength, Vickers hardness, others) and fragment size in the SHPB test. However, for the bulk SPSed samples the ratio of intergranular to transgranular fracturing changes, the first one being stronger in the added sample. This is reflected in the quasi-static K_IC that is higher for the added sample. Despite this result, sintered samples are brittle and have roughly similar fragmentation behavior as for brittle engineering ceramics. In the fragmentation process, the composite nature of our samples should be considered with a special focus on MgB₂ blocks (colonies) that show the major contribution to fracturing. The Glenn-Chudnovsky model of fracturing under dynamic load provides the closest values to our experimental fragment size data.     

Magneto-sensitive nickel nanowires fabricated by electrodeposition into multi- and single-ion track templates

Polycarbonate templates of (30±1) μm thickness containing cylindrical etched-track nanochannels of (500±50) nm diameter were used for electrodeposition of Ni nanowires. Using 10⁴ channels per cm², the most favourable deposition potential of  − 1.0 V was determined in a potentiostatic mode by varying the deposition potential with respect to an Ag/AgCl reference electrode over a range between  − 0.1 V and  − 1.5 V. The deposition efficiency at  − 1.0 V was estimated around 10%. The resulting single wires had a resistance around 200 Ω and showed an anisotropic magnetoresistance (AMR) effect of 1%, applicable to directionally sensitive magnetic field sensors.     

The Influence of the Microstructure and Morphology of CeO 2 Buffer Layer on the Properties of YBCO Films PLD Grown on Ni Tape

YBa₂Cu₃O_7?δ films were deposited on CeO₂-buffered nickel substrates, with different buffer thickness. Full width at half maximum of rocking curve, Δω, of CeO₂ and yttrium barium copper oxide (YBCO), as well as the critical temperature, T _c, of YBCO were shown to be strongly dependent on buffer thickness. They behave similarly but not proportional to the buffer thickness increase. This and the fact that Δω vs. buffer thickness and T _c vs. buffer thickness for YBCO behave similar with RMS roughness vs. thickness of CeO₂ indicates that the surface peculiarity of buffers is responsible for YBCO properties. More precisely, the surface of CeO₂ films prepared by the chemical solution route based on propionic acid is prone to agglomerate (de-wet) and the degree of agglomeration depends in an intricate way on buffer thickness. We showed that nor RMS roughness neither (00 l) texture degree can define alone the surface suitable for c-axis YBCO nucleation. The {111} faceted grains (even in the case of high (00 l) texture) and other defects generated by agglomeration supply a low fraction of (00 l) flat terminations of buffer that affect the nucleation of c-axis-oriented YBCO phase. Moreover, the thermal instability of the surface morphology of CeO₂ buffers (further development of de-wetting process, {111} faceted grains, etc. during superconducting layer deposition) influence the quality of YBCO films.     

Synthesis,structural and morphological characteristics,magnetic and optical properties of Co doped ZnO nanoparticles

Zn_1−xCo_xO (x==0.05, 0.10, 0.15) nanoparticles have been synthesized by an alternative wet-chemical synthesis route using the SimAdd technique. The as-obtained powders were investigated by FT-IR spectroscopy, X-ray diffraction and thermal analysis correlated with evolved gas analysis (TG–DTA–FT-IR) in order to determine their chemical nature, crystalline structure and to establish the decomposition sequences. The precipitates are generally amorphous, but low-intensity reflection peaks assigned both to the zinc oxalate dihydrate, and zinc hydroxide can be observed in the recorded patterns, indicating that hydroxy-oxalate precipitates were obtained. The structure, morphology and magnetic properties of the thermally treated samples have been investigated by X-ray diffraction, FT-IR, HRTEM, SAED, UV–vis and EPR. XRD studies reveal a hexagonal wurtzite-type structure for all Zn_1−xCo_xO samples. TEM investigations show particle size between 28 and 37 nm, with spherical and polyhedral shapes and with tendency to form aggregates. The presence of a Co₃O₄ secondary phase was evidenced by XRD, UV–vis and EPR for the Zn_0.85Co_0.15O sample. The ferromagnetic behavior of the samples was revealed. The paper highlights that by varying the cobalt concentration it is possible to modulate the structural, morphological, optical and magnetic properties.     

Superhydrophobic properties of cotton fabrics functionalized with ZnO by electroless deposition

Cotton fabrics were coated with arrays of ZnO hexagonal prisms using an electroless (catalytic/autocatalytic) deposition process. A typical three step method, similar to those used for electroless deposition of metals on insulating substrates, consisting of pre-activation, activation and deposition steps was employed. The low-dimensional ZnO particles were grown from an aqueous solution containing zinc nitrate as source of zinc ions and dimethylamineborane as reducing agent. The as-obtained ZnO-coated cotton fabrics were characterized from the point of view of structure by X-ray diffraction (XRD) and morphology by scanning electron microscopy (SEM). The XRD studies demonstrate that the ZnO particles have a hexagonal wurtzite crystalline structure. The SEM observations prove that the cotton fibers are homogeneously covered by hexagonal prisms which have uniform base size of approximately 500 nm and height of 1 μm. Optical spectroscopy measurements show that the functionalization with ZnO strongly decreases the transmittance in the UV–vis region of the cotton fabrics. An important characteristic is that the ZnO-functionalized cotton fabrics exhibit superhydrophobicity, with water contact angles exceeding 150°. The technique described is highly reproducible, easy scalable and cheap, allowing a wide range of applications.     

Secondary data — the Poor Relative of Business Continuity

Cable & Wireless Plc acquired Exodus on the 1st February 2002.You think you’ve got BCP covered because you take regular backups and store them safely off site and perhaps even encrypt them … Think again. There is a whole plethora of devices and programs that facilitate your users accessing that data after you have dutifully restored it from your backup medium of choice. These facilitators contain secondary data and this data needs backing up and security measures as well, otherwise your primary data will resemble a newly restored vintage car: great looks, but no leaded gasoline available to run on.     

Increase of regression speed of combustion through oxidizer doping

This paper presents an innovative method to increase the regression speed of a solid fuel grain by using oxidizer doping. The results obtained on a propulsion application showing the performance parameters as an output of a numerical model are provided. Two models are given that predict the regression speed increase for embedding wires and for oxidizer doping with a factor of ～2 to 3. Also, it is shown that this increase of the regression speed by using a low oxidizer doping percentage, which is based on the assumption that at a higher doping rate the combustion instabilities, can lead to detonations. Next, a thermochemical model for the combustion within the oxidizer doping model is afforded. For this model, the burn is assumed to take place around the surface of each of the oxidizer particles, being composed of two different burning processes: one is the burning on the surface of the solid fuel grain and the other is the burning between the solid fuel and the solid oxidizer. For a non-doped fuel grain, the burning takes place only on the surface of the fuel grain. Finally, a potential application of such propulsion units to small satellite launchers is presented, and a case study of such a vehicle intended to place a 50 kg payload on a low earth orbit (300 to 500 km altitude) is described. The modelling proposed is based on the assumption that the use of solid methane makes this launcher environmentally friendly.     

Properties of anodic oxides grown on a hafnium–tantalum–titanium thin film library

A ternary thin film combinatorial materials library of the valve metal system Hf–Ta–Ti obtained by co-sputtering was studied. The microstructural and crystallographic analysis of the obtained compositions revealed a crystalline and textured surface, with the exception of compositions with Ta concentration above 48 at.% which are amorphous and show a flat surface. Electrochemical anodization of the composition spread thin films was used for analysing the growth of the mixed surface oxides. Oxide formation factors, obtained from the potentiodynamic anodization curves, as well as the dielectric constants and electrical resistances, obtained from electrochemical impedance spectroscopy, were mapped along two dimensions of the library using a scanning droplet cell microscope. The semiconducting properties of the anodic oxides were mapped using Mott–Schottky analysis. The degree of oxide mixing was analysed qualitatively using x-ray photoelectron spectroscopy depth profiling. A quantitative analysis of the surface oxides was performed and correlated to the as-deposited metal thin film compositions. In the concurrent transport of the three metal cations during oxide growth a clear speed order of Ti > Hf > Ta was proven.