Retention of gallium ions from acidic solutions by pyridine strong‐base anion exchangers

Using the batch method, the retention of Ga(III) from HCl solutions by two gel‐type pyridine strong‐base anion exchangers containing 1‐methyl‐ or 1‐butyl‐4‐vinylpyridinium chloride structural units, called S₁ and S₂ resins, respectively, was studied. The influence of the HCl and Ga(III) concentrations as well as of the contact time between the resin and the liquid phase was investigated. The parameters, which characterize the retention process, were estimated using Langmuir and Freundlich isotherms. Both resins exhibited a higher affinity for gallium ions from a 6M HCl solution. According to Langmuir isotherms, maximum retention capacities of 44.44 and 60 mg Ga(III)/g dry resin for the S₁ and S₂ resins, respectively, were obtained. Freundlich isotherms provide additional proof for a higher affinity of the S₂ resin for Ga(III) from HCl solutions. It is clear that the substituent length increase on N⁺ atoms led to an increasing affinity of the pyridine strong base anion exchangers toward Ga(III). © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3440–3444, 2002     

Graphical simulation environments for modelling and simulation of integrative physiology

Guyton’s original integrative physiology model was a milestone in integrative physiology, combining significant physiological knowledge with an engineering perspective to develop a computational diagrammatic model. It is still used in research and teaching, with a small number of variants on the model also in circulation. However, though new research has added significantly to the knowledge represented by Guyton’s model, and significant advances have been made in computing and simulation software, an accepted common platform to integrate this new knowledge has not emerged. This paper discusses the issues in the selection of a suitable platform, together with a number of current possibilities, and suggests a graphical computing environment for modelling and simulation. By way of example, a validated version of Guyton’s 1992 model, implemented in the ubiquitous Simulink environment, is presented which provides a hierarchical representation amenable to extension and suitable for teaching and research uses. It is designed to appeal to the biomedical engineer and physiologist alike.     

Validation of a Method for Analysis of Aroma Compounds in Red Wine using Liquid–Liquid Extraction and GC–MS

An analytical method for determination of volatile composition of wines using sample preparation by liquid–liquid extraction and gas chromatography coupled to mass spectrometry for separation and detection has been developed and validated. Extraction of volatile compounds was performed in dichloromethane, and 1-octanol was added as an internal standard. Kékfrankos red wine produced in Villány wine region in Hungary was used as a model wine for testing and validation of the method. The developed method allowed satisfactory determination of 33 volatile compounds in the wines. Compounds analyzed include alcohols, esters, lactones, fatty acids, furans, and nitrogen compounds. The calibration curves of the four reference compounds used (2-phenyl ethanol, ethyl nonanoate, butyrolactone, and tyrosol) were linear in all cases with correlation coefficients (R ²) ranging from 0.9951 to 0.9992. The accuracy of the method was checked with a standard addition method (recovery 92.2–103 %), showing good repeatability and reproducibility (RSD?<?10 %).     

Synthesis of hybrid nanocomposites based on new triazeno copolymers and montmorillonite used for detecting metal ions

The modern synthesis of novel functional materials with improved properties includes that of hybrid nanocomposites composed of inorganic nanoparticles and organic derivatives, where controlling the molecular structure at atomic and macroscopic dimensions is a key factor, with a major effect on performance. An extension of this approach to the field of nanocomposites containing photopolymers with triazene groups attached on a methacrylic backbone could be of great interest in the future development of chemosensors and photoresists, among others. Photopolymer/clay nanocomposites were prepared by in situ free radical copolymerization of 1‐(phenyl)‐3‐(2‐methacryloyloxyethylcarbamoyloxyethyl)‐3‐methyltriazene‐1 or 1‐(p‐methoxyphenyl)‐3‐(2‐methacryloyloxyethylcarbamoyloxyethyl)‐3‐methyltriazene‐1 and vinyl acetate or styrene in solution and in the presence of 3 and 5 wt% of organically modified montmorillonite. The characterization of the nanocomposites and pure copolymers was achieved through ¹H NMR and Fourier transform infrared spectroscopy, gel permeation chromatography, thermogravimetric analysis, X‐ray diffraction, atomic force microscopy and fluorescence analysis. The morphologies and properties of the nanocomposites are dependent on the nature of the triazene, on the co‐monomer structure and on the organoclay content. Also, the fluorescence response of these nanocomposites towards certain metal ions (Fe³⁺, Cu²⁺, Hg²⁺, Ni²⁺) in dimethylformamide solution was investigated. The effect of uranyl ions on the fluorescence intensity of the nanocomposites in solution or as films could be exploited in the development of ‘turn‐off’ or ‘turn‐on’ chemosensors for this type of analyte. Triazeno copolymer/organophilic montmorillonite nanocomposites with exfoliated (not completely exfoliated) or exfoliated and intercalated structures exhibit distinct characteristics concerning their fluorescence behaviour, a higher sensing ability towards certain target compounds (Fe³⁺, UO₂²⁺) being evidenced for those incorporating 3 wt% organoclay in solution and as films. Copyright © 2010 Society of Chemical Industry     

Biochemical,microbiological and sensory changes in shrimp (Panaeus aztecus) dipped in different solutions using face‐centred central composite design

Biochemical, microbiological and sensory changes during shelf‐life at ?1 °C were determined in shrimp (Panaeus aztecus) previously dipped in ascorbic acid, citric acid, potassium sorbate and 4‐hexyl resorcinol solutions using face‐centred central composite design. Microbiological count, trimethylamine and hypoxantine production were measured. The lowest level of the total psychrotrophic bacteria, hypoxantine and trimethylamine were found in samples dipped in all containing chemicals solutions comparing to control treatment. Sensory studies showed that treatment A (ascorbic acid 4.50, citric acid 0.12, potassium sorbate 18.60 and 4‐hexyl resorcinol 0.25, all g L^?1) and B (ascorbic acid 4.37, citric acid 1.26, potassium sorbate 7.03 and 4‐hexyl resorcinol 0.25, all g L^?1) did not alter the typical sensory features of shrimp and were effective at delaying the bitter off‐flavour formation for 26 days. This study constitutes a promising alternative to extent shelf‐life of shrimp kept at ?1 °C without freezing.     

Superhydrophobic properties of cotton fabrics functionalized with ZnO by electroless deposition

Cotton fabrics were coated with arrays of ZnO hexagonal prisms using an electroless (catalytic/autocatalytic) deposition process. A typical three step method, similar to those used for electroless deposition of metals on insulating substrates, consisting of pre-activation, activation and deposition steps was employed. The low-dimensional ZnO particles were grown from an aqueous solution containing zinc nitrate as source of zinc ions and dimethylamineborane as reducing agent. The as-obtained ZnO-coated cotton fabrics were characterized from the point of view of structure by X-ray diffraction (XRD) and morphology by scanning electron microscopy (SEM). The XRD studies demonstrate that the ZnO particles have a hexagonal wurtzite crystalline structure. The SEM observations prove that the cotton fibers are homogeneously covered by hexagonal prisms which have uniform base size of approximately 500 nm and height of 1 μm. Optical spectroscopy measurements show that the functionalization with ZnO strongly decreases the transmittance in the UV–vis region of the cotton fabrics. An important characteristic is that the ZnO-functionalized cotton fabrics exhibit superhydrophobicity, with water contact angles exceeding 150°. The technique described is highly reproducible, easy scalable and cheap, allowing a wide range of applications.     

Liposomes as Carriers of Antimicrobial Drugs

Liposome are promising drug carrier systems being developed. Their successful use in the treatment of several diseases demonstrates that a solid rationale for clinical development of liposomes as antimicrobial drug carriers can be established. There are a number of potential drug candidates for liposome encapsulation. The involvement of several biotechnology companies has culminated in the design and licensing of formulations for the treatment of certain microbial infections and cancers. Understanding of liposome behavior in the body and of the physicochemical mechanisms involved in the interaction of liposome, drug, and cellular targets is essential for their future applications.     

Hawaiian and Azorean volcanic aggregates: a preliminary study of the potential alkali-silica reaction

Bulletin of Engineering Geology and the Environment - The alkali-silica reaction (ASR) is a chemical deterioration of concrete that involves reactive forms of silica. Volcanic glass is one of the...     

Novel Monocyclam Derivatives as HIV Entry Inhibitors: Design,Synthesis, Anti‐HIV Evaluation,and Their Interaction with the CXCR4 Co‐receptor

The CXCR4 receptor has been shown to interact with the human immunodeficiency virus (HIV) envelope glycoprotein gp120, leading to fusion of viral and cell membranes. Therefore, ligands that can attach to this receptor represent an important class of therapeutic agents against HIV, thus inhibiting the first step in the cycle of viral infection: the virus–cell entry/fusion. Herein we describe the in silico design, synthesis, and biological evaluation of novel monocyclam derivatives as HIV entry inhibitors. In vitro activity testing of these compounds in cell cultures against HIV strains revealed EC₅₀ values in the low micromolar range without cytotoxicity at the concentrations tested. Docking and molecular dynamics simulations were performed to predict the binding interactions between CXCR4 and the novel monocyclam derivatives. A binding mode of these compounds is proposed which is consistent with the main existing site‐directed mutagenesis data on the CXCR4 co‐receptor. Moreover, molecular modeling comparisons were performed between these novel monocyclams, previously reported non‐cyclam compounds from which the monocyclams are derived, and the well‐known AMD3100 bicyclam CXCR4 inhibitors. Our results suggest that these three structurally diverse CXCR4 inhibitors bind to overlapping but not identical amino acid residues in the transmembrane regions of the receptor.