Preconditioning of AISI 304 stainless steel surfaces in the presence of flavins—Part II: Effect on biofilm formation and microbially influenced corrosion processes

Biofilm formation and microbially influenced corrosion of the iron-reducing microorganism Shewanella putrefaciens were investigated on stainless steel surfaces preconditioned in the absence and presence of flavin molecules by means of XANES (X-ray absorption near-edge structure) analysis and electrochemical methods. The results indicate that biofilm formation was promoted on samples preconditioned in electrolytes containing minute amounts of flavins. On the basis of the XANES results, the corrosion processes are controlled by the iron-rich outer layer of the passive film. Biofilm formation resulted in a cathodic shift of the open circuit potential and a protective effect in terms of pitting corrosion. The samples preconditioned in the absence of flavins have shown delayed pitting and the samples preconditioned in the presence of flavins did not show any pitting in a window of −0.3- to +0.0-V overpotential in the bacterial medium. The results indicate that changes in the passive film chemistry induced by the presence of minute amounts of flavins during a mild anodic polarization can change the susceptibility of stainless steel surfaces to microbially influenced corrosion.     

Matrix Transformation in Boron Containing High-Temperature Co–Re–Cr Alloys

An addition of boron largely increases the ductility in polycrystalline high-temperature Co–Re alloys. Therefore, the effect of boron on the alloy structural characteristics is of high importance for the stability of the matrix at operational temperatures. Volume fractions of ε (hexagonal close-packed—hcp), γ (face-centered cubic—fcc) and σ (Cr₂Re₃ type) phases were measured at ambient and high temperatures (up to 1500 °C) for a boron-containing Co–17Re–23Cr alloy using neutron diffraction. The matrix phase undergoes an allotropic transformation from ε to γ structure at high temperatures, similar to pure cobalt and to the previously investigated, more complex Co–17Re–23Cr–1.2Ta–2.6C alloy. It was determined in this study that the transformation temperature depends on the boron content (0–1000 wt. ppm). Nevertheless, the transformation temperature did not change monotonically with the increase in the boron content but reached a minimum at approximately 200 ppm of boron. A probable reason is the interplay between the amount of boron in the matrix and the amount of σ phase, which binds hcp-stabilizing elements (Cr and Re). Moreover, borides were identified in alloys with high boron content.     

Development of a difunctional oxirane and multifunctional acrylate interpenetrating polymer network composite system with antimicrobial properties

This research continued the development of a difunctional Oxirane and multifunctional Acrylate interpenetrating polymer network composite System (OASys) with antimicrobial properties. The effects of 4-Isopropyl-4′-methyldiphenyliodonium tetrakis (pentafluorophenyl) borate (Borate), hexamethylene diamine (HMDA) and N,N-dimethyl p-toluidine (DMPT) on OASys (Epalloy 5001:dipentaerythritol hexaacrylate) composite hardness, contact angle, monomer-to-polymer degree of conversion (DoC), mechanical properties, polymerization shrinkage, shrinkage stress, and antimicrobial properties were determined. Bis-GMA:TEGDMA composites were used as the control. OASys composites with 9 wt% Borate and 0.5 wt% DMPT or 1.5 wt% HMDA had comparable hardness, DoC's and polymerization shrinkages to controls, but had lower contact angles and mechanical properties. Additionally, OASys composites with 1.5 wt% HMDA had significantly less polymerization stress than controls and demonstrated significant antibacterial activity against Streptococcus mutans and Lactobacillus casei out to 3 months. With lower shrinkage stress and long-term antimicrobial activity, OASys composites look promising for increasing the clinical lifetime of dental composites, but improvements in mechanical properties are needed.     

Optimized capacitive active ripple compensation topology for a 3.7 kW single-phase high power density on-board charger of electric vehicles

Electrical Engineering - In this paper, a comprehensive investigation of the capacitive active ripple compensation (ARC) techniques is made to conclude which one is optimal to be used in on-board...     

Full AC analysis of value of DER to the grid and optimal DER scheduling

This paper presents part of the work ComEd and Quanta Technology have performed to quantify the locational and temporal value of DER to avoid distribution grid upgrade investments. It focuses on the formulation of a robust and efficient algorithm for DER optimal dispatch on a distribution feeder to mitigate the violation of current and voltage limits using the allocated cost of capacity and locational marginal value of real and reactive DER injection/withdrawal.     

Planning for Sustainable Transport in Germany and the USA: A Comparison of the Washington,DC and Stuttgart Regions

Federal, state, and local governments in Germany and the USA strive to make passenger transport more sustainable to combat oil dependence, climate change, local pollution, and negative public health outcomes. This paper compares the Washington, DC and Stuttgart regions to demonstrate differences and similarities between the German and US land-use and transport planning systems. To illustrate local planning for more sustainable transport, we compare two best-practice examples for integrating transport and land-use planning: the Rosslyn–Ballston Corridor in Arlington County in the DC metro region and Scharnhauser Park in the City of Ostfildern in the Stuttgart region. In spite of significant differences in motorization, travel behaviour, sustainability, and planning systems, both Arlington County and the City of Ostfildern promote sustainable transport using comparable strategies: (1) mixed-use development around public transport stations; (2) comprehensive long-range plans; (3) citizen participation; and (4) coordinated transport, housing, and economic development policies.     

Passage of selected heavy metals from Sphaerotilus (bacteria: chlamydobacteriales) to Paramecium caudatum (protozoa: ciliata)

Sphaerotilus, a bacterium occurring in polluted waters, was found to take up Zn, Pb, Ni and Mn. Metal-containing cultures of this bacterium were employed to feed the protozoan Paramecium caudatum, and analytical results revealed the accumulation of Zn, Pb and Ni. Since Sphaerotilus was the only food source for paramecia during this study, the results indicate that trace amounts of metals were passed from bacteria to protozoa in a predator-prey relationship.     

Inefficiencies in electricity pricing in England and Wales

The combination of competition and regulation established in the electricity industry of England and Wales stimulates production efficiency and thus helps the industry to achieve low costs. Nevertheless this system does have some disadvantages as regards the incentives it presents to generators and to suppliers. These deficiencies arise because Use of System Charges both for Distribution and for Transmission are determined in a way that inadequately reflects the structure and level of marginal costs. Furthermore, the way that profiling for consumers taking less than 100 kW will work is likely to inhibit tariff innovation.