从集体利益中产生个人利益——共鸣设计方法及其在独立住宅转化为集合住宅中的运用

提出可以增加集合住宅受欢迎度的共鸣设计方法策略,这些策略不仅考虑到建筑本身的一些可能性,同时考虑到在空间和社会环境方面的要求,涵盖了物理的、心理的以及社会的因素;指出这类策略的应用带来了高度的用户接受度并使得适应性建筑在一个长时期内可以保持其价值.阐释在设计方法的帮助下,建筑物被记录和相互比较.     

Electrochemical routes for environmentally friendly recycling of rare-earth-based (Sm–Co) permanent magnets

Journal of Applied Electrochemistry - The consumption of critical raw materials, especially those in permanent magnets of Nd–Fe–B and Sm–Co-type, has significantly grown in the...     

Cast iron-a predictable material

High strength compacted graphite iron (CGI) or alloyed cast iron components are substituting previously used non-ferrous castings in automotive power train applications.The mechanical engineering industry has recognized the value in substituting forged or welded structures with stiff and light-weight cast iron castings.New products such as wind turbines have opened new markets for an entire suite of highly reliable ductile iron cast components.During the last 20 years,casting process simulation has developed from predicting hot spots and solidification to an integral assessment tool for foundries for the entire manufacturing route of castings.The support of the feeding related layout of the casting is still one of the most important duties for casting process simulation.Depending on the alloy poured,different feeding behaviors and self-feeding capabilities need to be considered to provide a defect free casting.Therefore,it is not enough to base the prediction of shrinkage defects solely on hot spots derived from temperature fields.To be able to quantitatively predict these defects,solidification simulation had to be combined with density and mass transport calculations,in order to evaluate the impact of the solidification morphology on the feeding behavior as well as to consider alloy dependent feeding ranges.For cast iron foundries,the use of casting process simulation has become an important instrument to predict the robustness and reliability of their processes,especially since the influence of alloying elements,melting practice and metallurgy need to be considered to quantify the special shrinkage and solidification behavior of cast iron.This allows the prediction of local structures,phases and ultimately the local mechanical properties of cast irons,to asses casting quality in the foundry but also to make use of this quantitative information during design of the casting.Casting quality issues related to thermally driven stresses in castings are also gaining increasing attention.State-of-the-art tools allow the prediction of residual stresses and iron casting distortion quantitatively.Cracks in castings can be assessed,as well as the reduction of casting stresses during heat treatment.As the property requirements for cast iron as a material in design strongly increase,new alloys and materials such as ADI might become more attractive,where latest software developments allow the modeling of the required heat treatment.Phases can be predicted and parametric studies can be performed to optimize the alloy dependent heat treatment conditions during austenitization,quenching and ausferritization.All this quantitative information about the material’s performance is most valuable if it can be used during casting design.The transfer of local properties into the designer’s world,to predict fatigue and durability as a function of the entire manufacturing route,will increase the trust in this old but highly innovative material and will open new opportunities for cast iron in the future.The paper will give an overview on current capabilities to quantitatively predict cast iron specific defects and casting performance and will highlight latest developments in modeling the manufacture of cast iron and ADI as well as the prediction of iron casting stresses.     

Effects of packaging SrI2(Eu) scintillator crystals

Recent renewed emphasis placed on gamma-ray detectors for national security purposes has motivated researchers to identify and develop new scintillator materials capable of high energy resolution and growable to large sizes. We have discovered that SrI₂(Eu) has many desirable properties for gamma-ray detection and spectroscopy, including high light yield of ∼90,000 photons/MeV and excellent light yield proportionality. We have measured <2.7% FWHM at 662 keV with small detectors (<1 cm³) in direct contact with a photomultiplier tube, and ∼3% resolution at 662 keV is obtained for 1 in.³ crystals. Due to the hygroscopic nature of SrI₂(Eu), similar to NaI(Tl), proper packaging is required for field use. This work describes a systematic study performed to determine the key factors in the packaging process to optimize performance. These factors include proper polishing of the surface, the geometry of the crystal, reflector materials and windows. A technique based on use of a collimated ¹³⁷Cs source was developed to examine light collection uniformity. Employing this technique, we found that when the crystal is packaged properly, the variation in the pulse height at 662 keV from events near the bottom of the crystal compared to those near the top of the crystal could be reduced to <1%. This paper describes the design and engineering of our detector package in order to improve energy resolution of 1 in.³-scale SrI₂(Eu) crystals.     

Chronologie des EHEC O104:H4 Ausbruchsgeschehens bis zur Gr��ndung der l?nder��bergreifenden Task Force EHEC aus Sicht der Lebensmittel��berwachung in Schleswig-Holstein am Beispiel des Kreises Schleswig-Flensburg

The article describes the chronology of events of the recent EHEC O104:H4 outbreak from the perspective of food inspection in Schleswig-Holstein until the National Task Force EHEC was founded. Taking the district of Schleswig-Flensburg as an example, the collaboration and information exchange between health and food control authorities is described. The Ministry of Agriculture, Environment and Rural Areas of Schleswig-Holstein (MLUR) received the first information about clusters of disorders with symptoms of bloody diarrhoea and HUS from the districts around Hamburg and the city of Hamburg on 19 May 2011. On the same day, the veterinary services and the service for consumer protection in the district of Schleswig-Flensburg were informed about a situation comparable to the one in the environment of Hamburg. Due to this situation, official procedures were initiated to discover the origins of this food-associated outbreak - both at the state and county level and in collaboration with the health authorities. On 1 June 2011, an initial telephone conference was held between the responsible ministries and the food inspection and health authorities of the counties and cities in order to coordinate a joint action. On 3 June 2011, the National Task Force EHEC was founded at the Federal Office for Consumer Protection and Food Safety (BVL) in Berlin. By founding the National Task Force EHEC, the coordination of the clearing process was passed over to the BVL two weeks after the public health authorities had knowledge of accumulated and cross-border cases. On 7 June 2011 an employee of the district Schleswig-Flensburg was sent to the Task Force EHEC in Berlin by the MLUR. The lesson to be learned as a result of the EHEC O104:H4 outbreak is that among the ??dangerous foods?? there are more plant-based foods than often assumed. In the future this must be much more taken into account.     

A GIS based component-oriented integrated system for estimation, visualization and analysis of road traffic air pollution

Road traffic is a dominant source of air pollution. Therefore it is necessary to provide decision-makers with up-to-date emission information in an easily understandable form. To achieve this goal we have integrated existing emission calculation software with a graphical user interface, which includes a GIS (geographical information system) component. The paper first gives a summary of the basic road traffic emission model and then focuses on the design and implementation of the computer application with the emphasis on the used component and GIS technology. The integrated emission evaluation system offers entirely new ways of using the emission model and gives additional visualization and analysis possibilities.     

Life-long learning for psychologists: Current status and a vision for the future.

As a profession we are committed to maintaining and enhancing our competence as psychologists in order to most effectively serve the public throughout our careers. While this is a widely shared commitment among psychologists, there is considerably less consensus regarding how best to accomplish this goal. This dilemma is examined from the ethical, educational and legal perspectives. The American Psychological Association (APA) Ethics Code clearly articulates that competence is an ethical duty, although there is little guidance provided in the code as to how to meet this standard. As a profession we have tended to focus on the construct of life-long learning and we have incorporated this principle into our education and training standards. In fact, APA accreditation requires that doctoral programs inculcate this value into our foundational training. The majority of Psychology Licensing Boards have addressed this issue through the endorsement of mandatory continuing education requirements that primarily focus on hours and the content or structure of approved programs. Potential limitations to our ability to effectively self-assess our professional training needs are discussed and several innovative models are presented for integrating effective self-assessment and continuing education. Three invited experts provide commentaries that further explore the challenges and dilemmas posed by the ethical, legal and professional duty to maintain and enhance competence throughout our professional careers. These commentaries broaden the considerations, provide practical suggestions from other professions and provide a vision for the future. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Behavioral interventions to increase HPV vaccination acceptability among mothers of young girls.

Objective: To determine the most effective ways to present human papillomavirus (HPV) vaccine risk and benefit information to mothers in Hispanic, African American, and White communities, to increase mothers’ intentions to vaccinate their daughters against HPV. Design: The study used a 3 × 2 between-subjects factorial design, involving 3 different risk presentation formats (graphical HPV statistics, nongraphical HPV statistics, or no-statistics control) and the presence or absence of rhetorical questions (RQ). Data were collected from a national sample of 471 mothers of girls ages 11–16. Main Outcome Variables: The primary outcome variable was mothers’ intention to vaccinate their daughters against HPV. Secondary outcomes included mothers’ self-reported message comprehension and perceptions of daughters’ vulnerability to HPV infection, infection severity, vaccine efficacy, and obstacles to immunization. Results and Conclusion: Results showed that both risk presentation format and RQs had an overall positive effect on mothers’ intention to vaccinate their daughters. However, the interventions appear to be more effective when used separately than when used in combination. Each of these interventions is brief and could easily be implemented by health care providers as well as in patient health communication literature. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Variation of Intumescent Coatings Revealing Different Modes of Action for Good Protection Performance

Thermal insulation and mechanical resistance play a crucial role for the performance of an intumescent coating. Both properties depend strongly on the morphology and morphological development of the foamed residue. Small amounts (4 wt%) of fiberglass, clay and a copper salt, respectively, are incorporated into an intumescent coating to study their influence on the morphology and performance of the residues. The bench scale fire tests were performed on 75 × 75 × 2 mm³ coated steel plates according to the standard time–temperature curve in the Standard Time Temperature Muffle Furnace⁺ (STT Mufu⁺). It provided information about foaming dynamics (expansion rates) and thermal insulation. Adding the copper salt halved the expansion height, whereas the clay and fiberglass change the height of the residue only moderately. The time to reach 500°C was improved by 31% for clay and 15% for the other two fillers. Nondestructive micro computed tomography is used to assess the inner structure of the residues. A transition of the residue from a black, carbonaceous foam with closed cells into an inorganic, residual open cell sponge occurs at high temperatures. This transition is due to a loss of carbon; the change in microstructure is analyzed by scanning electron microscopy. Additional mechanical tests are performed and interpreted with respect to the results of the morphology analysis. Adding clay or copper salt improved the mechanical resistance tested by a factor 4. The additives significantly influence the thickness and foaming dynamics as well as the inner structure of the residues, whereas their influence on insulation performance is moderate. In conclusion, different modes of action are observed to achieve similar insulation performance during the fire test.     

Reliability of Active-Matrix Organic Light-Emitting-Diode Arrays With Amorphous Silicon Thin-Film Transistor Backplanes on Clear Plastic

We have fabricated active-matrix organic light emitting diode (AMOLED) test arrays on an optically clear high-temperature flexible plastic substrate at process temperatures as high as 285 degC using amorphous silicon thin-film transistors (a-Si TFTs). The substrate transparency allows for the operation of AMOLED pixels as bottom-emission devices, and the improved stability of the a-Si TFTs processed at higher temperatures significantly improves the reliability of the light emission over time.