The activation of furfuryl alcohol polymerization by oxygen and its enhanced mechanical properties

The effect of oxygen and additional oxygen providers on furfuryl alcohol polymerization was investigated through chemical analyses and mechanical evaluation. NMR, UV–vis, Fourier transform infrared, and gas chromatography–mass spectrometry (GC–MS) results suggested that atmospheric oxygen and the further addition of an oxygen source functioned as an activator for the entire network polymerization. Interestingly, the construction of a conjugated structure on the furan linear chain, which is key to three-dimensional cross-linking, also appears to be accelerated in the presence of oxygen. Furthermore, the introduction of oxygen providers into the curing system successfully enhanced the mechanical properties of the cured furan resin.     

Surface treatment of titanium dioxide nanopowder using rotary electrode dielectric barrier discharge reactor

Titanium dioxide (TiO2) nanopowder (P-25;Degussa AG) was treated using dielectric barrier discharge (DBD) in a rotary electrode DBD (RE-DBD) reactor.Its electrical and optical characteristics were investigated during RE-DBD generation.The treated TiO2 nanopowder properties and structures were analyzed using x-ray diffraction (XRD) and Fourier-transform infrared spectroscopy (FTIR).After RE-DBD treatment,XRD measurements indicated that the anatase peak theta positions shifted from 25.3° to 25.1°,which can be attributed to the substitution of new functional groups in the TiO2 lattice.The FTIR results show that hydroxyl groups (OH) at 3400 cm-1 increased considerably.The mechanism used to modify the TiO2 nanopowder surface by air DBD treatment was confirmed from optical emission spectrum measurements.Reactive species,such as OH radical,ozone and atomic oxygen can play key roles in hydroxyl formation on the TiO2 nanopowder surface.     

Analysis of Cerebrospinal Fluid Extracellular Vesicles by Proximity Extension Assay: A Comparative Study of Four Isolation Kits

There is a lack of reliable biomarkers for disorders of the central nervous system (CNS), and diagnostics still heavily rely on symptoms that are both subjective and difficult to quantify. The cerebrospinal fluid (CSF) is a promising source of biomarkers due to its close connection to the CNS. Extracellular vesicles are actively secreted by cells, and proteomic analysis of CSF extracellular vesicles (EVs) and their molecular composition likely reflects changes in the CNS to a higher extent compared with total CSF, especially in the case of neuroinflammation, which could increase blood–brain barrier permeability and cause an influx of plasma proteins into the CSF. We used proximity extension assay for proteomic analysis due to its high sensitivity. We believe that this methodology could be useful for de novo biomarker discovery for several CNS diseases. We compared four commercially available kits for EV isolation: MagCapture and ExoIntact (based on magnetic beads), EVSecond L70 (size-exclusion chromatography), and exoEasy (membrane affinity). The isolated EVs were characterized by nanoparticle tracking analysis, ELISA (CD63, CD81 and albumin), and proximity extension assay (PEA) using two different panels, each consisting of 92 markers. The exoEasy samples did not pass the built-in quality controls and were excluded from downstream analysis. The number of detectable proteins in the ExoIntact samples was considerably higher (~150% for the cardiovascular III panel and ~320% for the cell regulation panel) compared with other groups. ExoIntact also showed the highest intersample correlation with an average Pearson’s correlation coefficient of 0.991 compared with 0.985 and 0.927 for MagCapture and EVSecond, respectively. The median coefficient of variation was 5%, 8%, and 22% for ExoIntact, MagCapture, and EVSecond, respectively. Comparing total CSF and ExoIntact samples revealed 70 differentially expressed proteins in the cardiovascular III panel and 17 in the cell regulation panel. To our knowledge, this is the first time that CSF EVs were analyzed by PEA. In conclusion, analysis of CSF EVs by PEA is feasible, and different isolation kits give distinct results, with ExoIntact showing the highest number of identified proteins with the lowest variability.     

Carbon radicals generated by solid polymers: Electron spin resonance spectroscopy for detection of species in water

Radicals generated in plastic medical devices (solid phase) by γ-rays or electron-beam irradiation during sterilization are known to cause oxidation of protein drugs, resulting in a loss or reduction in drug efficacy. The generation of radical species in water by the radical species in solid polymers has not been proved. Using electron spin resonance (ESR) spectroscopy, we confirm the generation of new radicals in water by γ-ray irradiated cyclic olefin polymers (COP). ESR measurements are obtained using 4-hydroxy-2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPOL) as a spin probe and 5-(2,2-dimethyl-1,3-propoxycyclophosphoryl)-5-methyl-1-pyrroline N-oxide (CYPMPO) as a spin trap, in which the irradiated COP was immersed. The ESR signals indicate the TEMPOL radicals decline over time, suggesting the generation of new radicals. Conversely, the characteristic ESR signals of the adduct formed by the reaction between CYPMPO and the hydroxyl radical are observed. Thus, hydroxyl radicals are generated because of the migration of the radicals from COP to water. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48604.     

Isolation of antimicrobial agent from the marine algae Cystoseira hakodatensis

Cystoseira hakodatensis is an unutilised brown algae belonging to family Sargassaceae. A crude methanol extract from the algae showed inhibitory effects on the growths of Bacillus cereus and Bacillus licheniformis. To isolate the major antimicrobial agent, a sequential active‐guided isolation procedure was applied: liquid–liquid extraction, column chromatography and bio‐autography. A marked antimicrobial agent (active α) was isolated in hydrophobic fraction and was determined to phenolics without carbohydrates and proteins by phytochemical test. Regarding the antimicrobial potential, the isolated active α showed better inhibitory effects against B. cereus and B. licheniformis at 2 and 4 times of lower concentrations (62.5 and 31.3 μg mL^?1) in comparison with epigallocatechin gallate. These results showed that C. hakodatensis is a potential source of antimicrobial agent capable of preventing the growth of the two bacteria.     

Spray-dry synthesis of β-Cu1.8Zn0.2V2O7 ceramic fine particles showing giant negative thermal expansion

We used spray-dry method to synthesize fine powder of β-Cu_1.8Zn_0.2V₂O₇ showing large negative thermal expansion (NTE) linearly to temperature over a wide temperature range. The NTE of β-Cu_1.8Zn_0.2V₂O₇ is produced by microstructures consisting of voids and anisotropic thermal deformation of crystal grains in ceramics. By reducing the size of the microstructures that produce NTE, large NTE equivalent to that of bulk was realized, even for ceramic particles of about 2 μm size. Comparison with particles produced using a conventional method demonstrates that the particle size distribution is narrow and that the particles are nearly spherical. This achievement is expected to pave the way to use of NTE materials in micrometer-scale control of thermal expansion.     

Synthesis of 4‐Aryl‐2‐Quinolones via Copper‐Catalyzed Hydroarylation of (o‐Aminophenyl)propiolates with Arylboronates

4‐Aryl‐2(1H)‐quinolones were efficiently synthesized via copper‐catalyzed hydroarylation of (o‐aminophenyl)propiolates with arylboronic acid neopentyl glycol esters. The substrate propiolates were prepared from the corresponding silylalkynes with carbon dioxide by Kondo’s carboxylation method using N,N‐dimethylformamide as a solvent. Hydroarylation was performed in the presence of 3 mol% copper(II) acetate in methanol at 28 °C for 12 h and subsequent deprotection using trifluoromethanesulfonic acid (3.0 equiv.) at 65 °C for 2 h in the same pot to afford the desired 4‐aryl‐2(1H)‐quinolones in 39–89% yields.

     

Minimum void ratio characteristic of soils containing non-plastic fines

The minimum void ratio is an index widely used to indicate the contraction characteristics and the densest state of soils. The minimum void ratio obtained by the traditional test method has been utilized to represent the density of soils irrespective of their fines content despite the restriction (FC ≤ 5%). By considering the effect of the blow count, pore water, and their primary properties, the applicability of the minimum void ratio to soils containing fines was examined with an automatic tapping machine. It was confirmed that the blow count of the traditional method is not sufficient for soils with a high fines content. Furthermore, the presence of pore water had a significant effect on the minimum void ratio of soils containing fines. The characteristics of the cyclic minimum void ratio, which indicates the minimum void ratio obtained throughout the repetition of liquefaction and drainage, were also examined.