101.3 kPa 下环氧环己烷-环己酮气液平衡的测定及关联简

Many by-products are generated in the process of oxidizing cyclohexene to produce 1,2-epoxycyclohexane by hydrogen peroxide, including cyclohexanol, cyclohexanone, etc. To obtain high-purity 1,2-epoxycyclohexane, the by-products must be removed through rectification. Refining 1,2-epoxycyclohexane through rectification requires vapor-liquid equilibrium （VLE） data of the related system. Therefore, the VLE data of 1,2-epoxycyclohexane- cyclohexanone system were measured at 101.3 kPa using an improved EC-2 VLE still. The thermodynamic consistency of the data was then tested by Herington＇s method and the rigorous point-to-point method. The results obtained were exemplary. The VLE data were correlated by the Wilson and non-random two-liquid （NRTL） equations, using the error sum squares of the vapor composition as the objective function to obtain the model parameters. The difference between the calculated values and the experimental data is minor, indicating that the VLE data are suitable for engineering design.     

常压下环氧环己烷-环己酮-环己醇三元系汽液平衡

H2O2氧化环己烯制备环氧环己烷时有环己酮、环己醇等很多副产物产生。为了获得较纯的环氧环己烷需采用精馏进行分离,精馏提纯需要相关体系的汽液平衡数据,因此采用改进的EC-2汽液平衡釜测定常压(101.33 k Pa)下环己酮-环己醇二元体系和环氧环己烷-环己酮-环己醇三元体系汽液平衡数据。利用二元系汽液平衡数据拟合得到的Wilson方程配偶参数预测该三元体系的汽液平衡数据,并以汽相组成的误差平方和作为目标函数,用Wilson方程关联实验数据,结果表明预测值及关联值与实验值偏差较小,可满足工程上分离设计的需要。     

常压下环己烯-环氧环己烷-环己醇三元系汽液平衡数据的测定、预测及关联

H2O2氧化环己烯制备环氧环己烷时有环己醇等很多副产物产生,同时还有未反应完的环己烯留在反应液里。为了获得较纯的环氧环己烷需采用精馏将副产物和环己烯分离出来,精馏提纯需要相关体系的汽液平衡数据,因此采用改进的EC-2汽液平衡釜测定常压(101.33 kPa)下环己烯-环氧环己烷-环己醇三元体系汽液平衡数据。利用二元系汽液平衡数据拟合得到的Wilson方程配偶参数预测该三元体系的汽液平衡数据,并以汽相组成的误差平方和作为目标函数,用Wilson方程关联实验数据,结果表明预测值及关联值与实验值偏差较小,可满足工程上分离设计的需要。     

1,2-环氧环己烷的精馏工艺研究

针对双氧水氧化环己烯制得的有机相,经过环己烯回收和1,2一环氧环己烷精制2次常压精馏,获得了纯度达99.68%的1,2-环氧环己烷.通过内标法定量测定馏出液中环己烯与1,2-环氧环己烷的含量,分别考察了回流比与采出率对环己烯回收和1,2-环氧环己烷纯度的影响,确定了精馏分离的较佳工艺条件:回流比为15,环己烯的采出率为原料液的51%,环氧环己烷的采出率为26%.     

常压下环己烯-环己醇汽液平衡的测定和关联

Many by-products are generated in the process of oxidizing cyclohexene to produce 1,2-epoxycyclohexane by hydrogen peroxide,including cyclohexanol,cyclohexanone,etc.To obtain high-purity 1,2-epoxycyclohexane, the by-products and unreacted cyclohexene must be removed through rectification,in which the vapor-liquid equilibrium(VLE)data of the system are needed.In this study,the VLE data of cyclohexene-cyclohexanol system were studied at 101.3 kPa using an improved EC-2 VLE still.The thermodynamic consistency of the data was examined by Herington’s method.The results obtained were exemplary.The VLE data were correlated by the Wilson equation. The difference between the calculated values and the experimental data is minor,indicating that the VLE data are suitable for engineering design.     

常压下环己烯-环己酮二元体系汽液平衡研究

H2O2氧化环己烯合成环氧环己烷有很多副产物生成,如环己酮、环己醇等,为了获得较纯的环氧环己烷需采用精馏提纯的方法将副产物分离出来.而精馏提纯需要相关体系的汽液平衡数据,为此用改进的Rose汽液平衡釜测定常压下环己烯-环己酮二元体系汽液平衡数据,并对数据进行热力学一致性检验,结果表明实验数据符合热力学一致性.以汽相组成...     

常压下环己烯-环氧环己烷-环己酮三元系汽液平衡的测定、预测及关联

H2O2氧化环己烯制备环氧环己烷时会产生环己酮等副产物,同时还有未反应完的环己烯。为了获得较纯的环氧环己烷需采用精馏将副产物和环己烯分离出来,精馏提纯需要相关体系的汽液平衡数据,因此采用改进的EC-2汽液平衡釜测定常压(101.33k Pa)下环己烯-环氧环己烷-环己酮三元体系汽液平衡数据。利用二元系汽液平衡数据拟合得到的Wilson方程配偶参数预测该三元体系的汽液平衡数据,并以汽相组成的误差平方和作为目标函数,用Wilson方程关联实验数据,结果表明预测值及关联值与实验值偏差较小,可满足工程上分离设计的需要。     

常压下1,2-环氧环己烷-环己醇汽液平衡数据的测定及关联

H2O2氧化环己烯生成1,2-环氧环己烷有很多副产物,如环己醇、环己酮等,为了获得较纯的1,2-环氧环己烷需采用精馏提纯的方法将副产物分离出来。而精馏提纯需要相关体系的汽液平衡数据,为此用改进的EC-2汽液平衡釜测定常压(101.33 kPa)下1,2-环氧环己烷-环己醇二元体汽液平衡计算值与实验值进行比较,发现二者偏差较小,可以满足工程上分离设计的需要。