Application of ferrous sulfate alleviates negative impact of cadmium in rice (<i>Oryza sativa</i> L.)

Soil contamination with toxic heavy metals [such as cadmium (Cd)] is becoming a serious global problem due to rapid development of social economy. Iron (Fe), being an important element, has been found effective in enhancing plant tolerance against biotic and abiotic stresses. The present study investigated the extent to which different levels of Ferrous sulphate (FeSO₄) modulated the Cd tolerance of rice (Oryza sativa L.), when maintained in artificially Cd spiked regimes. A pot experiment was conducted under controlled conditions for 146 days, by using natural soil, mixed with different levels of CdCl₂ [0 (no Cd), 0.5 and 1 mg/kg] together with the exogenous application of FeSO₄ at [0 (no Fe), 1.5 and 3 mg/kg] levels to monitor different growth, gaseous exchange characteristics, oxidative stress, antioxidative responses, minerals accumulation, organic acid exudation patterns of O. sativa. Our results depicted that addition of Cd to the soil significantly (P < 0.05) decreased plant growth and biomass, gaseous exchange parameters, mineral uptake by the plants, sugars (soluble, reducing, and non-reducing sugar) and altered the ultrastructure of chloroplasts, plastoglobuli, mitochondria, and many other cellular organelles in Cd-stressed O. sativa compared to those plants which were grown without the addition of Cd in the soil. However, Cd toxicity boosted the production of reactive oxygen species (ROS) by increasing the contents of malondialdehyde (MDA), which is the indication of oxidative stress in O. sativa and was also manifested by hydrogen peroxide (H₂O₂) contents and electrolyte leakage to the membrane bounded organelles. Although, activities of various antioxidative enzymes like superoxidase dismutase (SOD), peroxidase (POD), catalase (CAT) and ascorbate peroxidase (APX) and non-enzymatic antioxidants like phenolics, flavonoid, ascorbic acid, anthocyanin and proline contents increased up to a Cd level of 0.5 mg/kg in the soil but were significantly diminished at the highest Cd level of 1 mg/kg in the soil compared to those plants which were grown without the addition of Cd in the soil. The negative impacts of Cd injury were reduced by the application of FeSO₄ which increased plant growth and biomass, improved photosynthetic apparatus, antioxidant enzymes, minerals uptake together with diminished exudation of organic acids as well as oxidative stress indicators in roots and shoots of O. sativa by decreasing Cd retention in different plant parts. These results shed light on the effectiveness of FeSO₄ in improving the growth and upregulation of antioxidant enzyme activities of O. sativa in response to Cd stress. However, further studies at field levels are required to explore the mechanisms of FeSO₄-mediated reduction of the toxicity of not only Cd, but possibly also other heavy metals in plants.     

Pure CuBi2O4 Photoelectrodes with Increased Stability by Rapid Thermal Processing of Bi2O3/CuO Grown by Pulsed Laser Deposition

A new method for enhancing the charge separation and photo‐electrochemical stability of CuBi₂O₄ photoelectrodes by sequentially depositing Bi₂O₃ and CuO layers on fluorine‐doped tin oxide substrates with pulsed laser deposition (PLD), followed by rapid thermal processing (RTP), resulting in phase‐pure, highly crystalline films after 10 min at 650 °C, is reported. Conventional furnace annealing of similar films for 72 h at 500 °C do not result in phase‐pure CuBi₂O₄. The combined PLD and RTP approach allow excellent control of the Bi:Cu stoichiometry and results in photoelectrodes with superior electronic properties compared to photoelectrodes fabricated through spray pyrolysis. The low photocurrents of the CuBi₂O₄ photocathodes fabricated through PLD/RTP in this study are primarily attributed to their low specific surface area, lack of CuO impurities, and limited, slow charge transport in the undoped films. Bare (without protection layers) CuBi₂O₄ photoelectrodes made with PLD/RTP shows a photocurrent decrease of only 26% after 5 h, which represents the highest stability reported to date for this material. The PLD/RTP fabrication approach offers new possibilities of fabricating complex metal oxides photoelectrodes with a high degree of crystallinity and good electronic properties at higher temperatures than the thermal stability of glass‐based transparent conductive substrates would allow.     

Destructive and non-destructive evaluation of concrete for optimum sand to aggregate volume ratio

Aggregates are the biggest contributor to concrete volume and are a crucial parameter in dictating its mechanical properties. As such, a detailed experimental investigation was carried out to evaluate the effect of sand-to-aggregate volume ratio (s/a) on the mechanical properties of concrete utilizing both destructive and non-destructive testing (employing UPV (ultrasonic pulse velocity) measurements). For investigation, standard cylindrical concrete samples were made with different s/a (0.36, 0.40, 0.44, 0.48, 0.52, and 0.56), cement content (340 and 450 kg/m³), water-to-cement ratio (0.45 and 0.50), and maximum aggregate size (12 and 19 mm). The effect of these design parameters on the 7, 14, and 28 d compressive strength, tensile strength, elastic modulus, and UPV of concrete were assessed. The careful analysis demonstrates that aggregate proportions and size need to be optimized for formulating mix designs; optimum ratios of s/a were found to be 0.40 and 0.44 for the maximum aggregate size of 12 and 19 mm, respectively, irrespective of the W/C (water-to-cement) and cement content.     

A two-dimensional problem of a mode-I crack in a rotating fibre-reinforced isotropic thermoelastic medium under dual-phase-lag model

In the present work, a general model of the equations of generalized thermoelasticity for a homogeneous isotropic elastic half-space solid whose surface is subjected to a mode-I crack problem under the effect of rotation is investigated. The normal mode analyses are used to obtain the expressions for the temperature distribution, the displacement component and thermal stresses in the context of the dual-phase-lag theory of thermoelasticity proposed by Tzou. The boundary of the crack is subjected to a prescribed stress distribution and temperature. Some particular cases are also discussed in the context of the problem. The numerical values of the temperature distribution, the displacement components and thermal stresses are also computed for a suitable material and the results are presented graphically. The effects of rotation, reinforcement and the phase lags parameters are discussed in detail in the light of earlier works.     

Heat Transfer Analysis of MHD Power Law Nano Fluid Flow through Annular Sector Duct

Flow and heat transfer analysis of an electrically conducting MHD power law nano fluid is carried out through annular sector duct,under the influence of constant pressure gradient.Two types of nano particles(i.e.Cu and TiO2)are used in power law nano fluid.Strongly implicit procedure,(SIP)is used to simulate the discretized coupled algebraic equations.It has been observed that volume fraction of nano particles,ϕand magnetic field parameter,Ha are favourable for the heat transfer rate,however,both resist the fluid flow.Impact of applied uniform transverse magnetic field exceeds in the case of shear thickening fluids(i.e.n>1)by increasing the value of Ha as compared to that in shear thinning fluids(i.e.n<1).Therefore,enhancement in heat transfer rate is comparably more in shear thickening fluid.Furthermore,comparable limiting case study with published result is also carried out in this research paper.     

Stochastic Simulation of Construction Bidding and Project Management

Abstract: A stochastic simulation model of a project management game was developed to assist in training estimators in developing bidding strategies in construction. This paper discusses the development of the conceptual gaming model for bidding on construction projects and the implementation of the model on portable software. The model simulates the actual bidding in construction by creating projects, initiating random phenomena, and keeping track of the performance of the individual players of the game. Upon conclusion of the game the winner is selected as the player that maximizes his relative return on the original investment assigned to him by the game. The paper describes the underlying construction management concepts and the bidding process in general. The database management model is then detailed focusing on the requirements and strategy behind the development of the various databases. The paper also describes the various models utilized in simulating the involved random processes. Finally the operation of the program is introduced and its use in educating construction engineers and managers is highlighted.     

Synthesis of a novolac‐based 3‐aminopropylsiloxane resin and its application for the removal of Cu2+, Cr3+, and Ni2+ from electroplating wastewater

Novolac resin was modified with 3‐aminopropyltrimthoxysilane to obtain phenol‐formaldehyde‐aminopropylsiloxane resin (PF‐APS). Fourier transformation infra‐red spectra, thermogravimetric analysis, elemental analysis, and pH‐metric titration were used to characterize PF‐APS. Its chemical formula was suggested to be C₁₄H_12.49N_0.1O₂Si_0.1. The resin shows high experimental metal ions uptake capacity within short time of equilibration. The metal capacity was determined by atomic absorption spectrometry to be 0.787 mEq Cu/g. Maximum separation efficiencies of Cu²⁺, Cr³⁺, and Ni²⁺ from aqueous solutions on PF‐APS were at pH 8.0 and time of stirring 60 min; 94.0%, 90.8%, 83.2%, respectively. No significant interference from the background ions Na⁺, Cl^?, and was observed on the separation process. The heavy metal ions were eluted using 0.01 mol L^?1 EDTA at 65°C releasing >94% of the separated metal ions. The method of separation was applied successfully to remove the heavy metal ions Cu²⁺, Cr³⁺, and Ni²⁺ from electroplating wastewater from Dekirnis, Dakahlia Governorate, Egypt. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40993.     

Synthesis and Characterization of Magnetically Retrievable Fe3O4/Polyvinylpyrrolidone/Polystyrene Nanocomposite Catalyst for Efficient Catalytic Oxidation Degradation of Dyes Pollutants

Recently, the application of metal oxides such as Fe₃O₄ nanoparticles have wide interest for environmental remediation and treatment of wastewater especially contaminated with azo dyes owing to its high degradation efficacy and low toxicity. The recovery of magnetic catalysts without losing their efficiency is an essential feature in the catalytic applications. The aim of this article is to investigate and synthesis of magnetically retrievable Fe₃O₄/polyvinylpyrrolidone/polystyrene (Fe₃O₄/PVP/PS) nanocomposite for the catalytic degradation of azo dye acid red 18 (AR18). Fe₃O₄/PVP/PS nanocomposite was prepared in two steps. Firstly, PVP/PS microsphere was synthesized by γ-irradiation polymerization of styrene in presence of PVP solution. Secondly, deposition of Fe₃O₄ nanoparticles on PVP/PS microsphere was achieved by the alkaline co-precipitation of Fe³⁺/Fe²⁺ ions. The chemical structural and morphological properties of PVP/PS microsphere and Fe₃O₄/PVP/PS nanocomposite were examined by XRD, TEM, DLS, FTIR, EDX and VSM techniques. TEM results showed homogeneous morphology, spherical shaped and well-dispersed Fe₃O₄ nanoparticles with average particle size of 26 nm around PVP/PS microspheres. The VSM measurements of Fe₃O₄/PVP/PS nanocomposite exhibit excellent magnetic response of saturation magnetization 26.38 emu/g which is suitable in magnetic separation. The effect of the synthesized Fe₃O₄/PVP/PS nanocomposite on the catalytic degradation of AR18 in presence of hydrogen peroxide (H₂O₂) as a heterogeneous Fenton-like catalyst was examined. The catalyst Fe₃O₄/PVP/PS/H₂O₂ played basic role in promoting the oxidation degradation efficiency of AR18 of initial concentration 50 mg/L to 94.4% in 45 min with excellent recyclability till the sixth cycles under the best conditions of pH 3, 2% v/v H₂O₂ and 0.3 g catalyst amount. Furthermore, the Fe₃O₄/PVP/PS/H₂O₂ hybrid catalyst system supports high capability for oxidation degradation of mixture of different dyes. The Fe₃O₄/PVP/PS nanocomposite catalyst had high magnetic and recyclability characters which are acceptable for the treatment of wastewater contaminated by various dyes pollutants.

     

On a case of dynamic feedback optimization†

In this paper the problem of selecting an optimal feedback controller, from a class of linear systems, for a non-linear dynamical system, is reduced to a standard parameter optimization problem given by Boltyanskii. A necessary condition for the selection of the optimal parameters is presented.