有砟轨道路基翻浆冒泥模型试验系统的研发与应用

为研究既有线有砟轨道路基的翻浆冒泥机理，自主研发了一套能够模拟循环荷载–湿化耦合作用的模型试验系统。模型试样直径500 mm，由厚度分别为350 mm的路基土和200 mm的道砟组成，整个试样在高强度透明有机玻璃模型筒中制备完成。模型试验系统配备有监测荷载、位移、体积含水率和孔隙水压力的4种传感器，并通过高清相机对颗粒迁移过程进行图像捕捉。基于所研发的试验系统，针对辛泰铁路典型翻浆冒泥病害路段土样，开展翻浆冒泥模型试验。试验结果表明：动孔隙水压力是导致翻浆冒泥病害产生的关键因素。随着体积含水率的增加，动孔隙水压力引起的颗粒迁移量逐渐增加；在饱和状态下，会引起大量颗粒迁移，翻浆冒泥现象显著。试验结束时，道砟污染指数达到25%，在实际工程中已严重影响铁路的正常运营，有必要对污染道砟进行换填。     

复杂环形内悬空空间网格结构施工卸载优化

为解决麦积山景区游客服务中心项目的卸载施工难题，选取合理的卸载方法，文中借助了有限元软件对拟定的4种卸载方案进行了模拟分析，分别从关键节点的位移变形、结构杆件的最大应力变化、主体结构的支撑体系受力转变、临时支撑的最大反力变化、临时支撑的总反力几个方面优选出了最佳的卸载方案。结果表明内至外卸载方案下，卸载的动态最为平稳，有利于结构和临时支撑的稳定，为最优卸载方案。其相应的分析过程和分析结果都能为类似结构的安全卸载施工提供相关指导和借鉴。     

白酒人工催陈技术研究进展

白酒自然陈酿具有周期长、占地面积大和投资成本高等问题，因此白酒人工催陈技术受到了广泛的关注。目前白酒人工催陈技术主要包括物理催陈、化学催陈和生物催陈等，其中，物理催陈和生物催陈应用潜力较大，这些技术的应用可以大幅度缩短储存时间，提高白酒品质，降低生产成本。本文从白酒陈酿机理、储存条件出发，综述中国白酒人工催陈技术的研究现状，并对不同的催陈技术及其应用前景进行了分析和比较，旨在为今后白酒人工催陈的研究提供参考和借鉴。     

基于全相位预处理的时域多重信号分类波达方向估计方法

低信噪比下,针对宽带短脉冲情况下频域多重信号分类(MUSIC)中噪声子空间估计不稳定问题,提出一种基于全相位预处理的时域多重信号分类波达方向(DOA)估计方法。①对线列阵接收数据进行分组处理;②按搜索角度对各组数据进行相移预处理,并对各组数据预处理结果进行相加,得到一组新数据;③对线列阵接收数据在时域构建相移后的协方差矩阵,在更短数据长度下,稳定实现噪声子空间估计,并依据估计出的噪声子空间含有的正交特性,通过单位矩阵加法器得到相应空间谱估计值,实现波达方向估计。数值仿真和实测数据处理结果表明,相比频域MUSIC方法,该方法有效提高了线列阵接收数据协方差矩阵中信号含有量和信噪比,能够在更短数据长度情况下实现对噪声子空间的稳定估计,具有较好的稳定性和检测性能,提高了MUSIC方法在实际波达方向估计中的鲁棒性。     

基于LBSN动态异构网络的时间感知兴趣点推荐

随着基于位置社交网络(Location-Based Social Network,LBSN)的快速发展,兴趣点(Point-Of-Interest,POI)推荐可以帮助人们发现有趣的并吸引人的位置。针对签到数据的稀疏性和用户兴趣的动态性等挑战性问题,提出了基于LBSN动态异构网络的时间感知兴趣点推荐算法。在LBSN异构网络模式中增加会话节点类型。通过动态元路径,在用户和兴趣点语义关系之间有效地融入时间信息、位置信息和社交信息等。设置了用户-兴趣点之间的动态元路径集,并提出了动态路径实例的偏好度计算方法。采用矩阵分解模型对不同动态偏好矩阵进行矩阵分解。根据不同动态元路径的用户特征矩阵和兴趣点特征矩阵,获取用户在目标时间访问兴趣点的推荐列表。实验结果表明,与其他兴趣点推荐方法相比,所提方法在兴趣点推荐精确度上取得了较好的推荐结果,具有良好的应用前景。     

Multi-objective optimal allocation strategy for the energy internet in Huangpu District,Guangzhou, China

To improve the overall efficiency of the energy system, the basic structure for the energy internet of coordination and optimization of “generation-grid-load-storage” of Huangpu District, Guangzhou, China is designed, while the arrangement for the output of centralized and distributed energy module and energy storage are proposed. Taking economic benefit maximization, environmental benefit maximization and energy efficiency maximization as sub-objectives, the mathematical model of multi-objective optimal allocation and operation strategy of the energy internet is established considering supply-demand balance constraints, equipment characteristic constraints, operation mode constraints, and energy conditions constraints. The calculation results show that without considering the outsourced electricity, the balanced strategy, the economic development strategy, the environmental protection strategy, and the energy efficiency strategy are obtained by calculation, which are all superior to the traditional energy supply strategy. Moreover, considering the outsourced electricity, the proportion of outsourced electricity to total electricity is 19.8%, which is the system optimization of the energy internet under certain power demand. Compared with other strategies without outsourced electricity, the outsourced electricity strategy can have a certain emission reduction effect, but at the same time reduce the economic benefit. Furthermore, the huge difference in demand for thermal and cooling load between industrial and commercial areas results in the installed capacity of gas distributed energy stations in industrial areas being nearly twice as large as that in commercial areas. The distributed photovoltaic power generation is allocated according to the proportion of the installed roof areas of photovoltaic power generation system in residential, industrial, and commercial areas.     

Effects of stray AC on corrosion of 3-layer polyethylene coated X70 pipeline steel and cathodic delamination of coating with defects in 3.5 wt-% NaCl solution

In this work, the effects of stray alternating current (AC) on the corrosion of coated X70 pipeline steel and the delamination of 3-layer polyethylene (3PE) coatings with defects were investigated using COMSOL Multiphysics simulation, electrochemical impedance spectroscopy and three-dimensional (3D) digital microscope techniques. The results showed that under the same level of AC interference, pits with deeper maximum pit depth were observed at the smaller defect areas than those at larger defect areas. It was consistent with the simulation results that a greater corrosion current density was accompanied on samples with smaller defects. According to 3D digital images, the larger delamination of 3PE coatings was found on samples with smaller defects. With the increase of current density, the impedance of samples with small defects decreased, while that of samples with large defects increased. Additionally, with the same defect size, the maximum pit depth became deeper and the corrosion was more severe.     

35CrMo钢组织遗传消除工艺研究

通过对船用长轴类大锻件的热处理工艺研究得知,采用临界区高温侧正火热处理工艺可以有效消除35CrMo钢组织遗传现象,细化晶粒。