Effect of Messaging Model on the Reliable Data Transfer Latency in a Fog System

Journal of Network and Systems Management - IoT applications have become a pillar for enhancing the quality of life. However, the increasing amount of data generated by IoT devices places pressure...     

Laboratory Studies to Determine Suitable Chemicals to Improve Oil Recovery from Garzan Oil Field

Garzan oil field is located at the south east of Turkey. It is a mature oil field and the reservoir is fractured carbonate reservoir. After producing about 1% original oil in place (OOIP) reservoir pressure started to decline. Waterflooding was started in order to support reservoir pressure and also to enhance oil production in 1960. Waterflooding improved the oil recovery but after years of flooding water breakthrough at the production wells was observed. This increased the water/oil ratio at the production wells. In order to enhance oil recovery again different techniques were investigated. Chemical enhanced oil recovery (EOR) methods are gaining attention all over the world for oil recovery. Surfactant injection is an effective way for interfacial tension (IFT) reduction and wettability reversal. In this study, 31 different types of chemicals were studied to specify the effects on oil production. This paper presents solubility of surfactants in brine, IFT and contact angle measurements, imbibition tests, and lastly core flooding experiments. Most of the chemicals were incompatible with Garzan formation water, which has high divalent ion concentration. In this case, the usage of 2-propanol as co-surfactant yielded successful results for stability of the selected chemical solutions. The results of the wettability test indicated that both tested cationic and anionic surfactants altered the wettability of the carbonate rock from oil-wet to intermediate-wet. The maximum oil recovery by imbibition test was reached when core was exposed 1-ethly ionic liquid after imbibition in formation water. Also, after core flooding test, it is concluded that considerable amount of oil can be recovered from Garzan reservoir by waterflooding alone if adverse effects of natural fractures could be eliminated.     

飞灰固结体在沥青混合料中应用研究

通过对新型固结剂固化飞灰生成的固结体研磨成微粉全部或部分替代矿粉作为沥青混合料进行试验探究。试验结果表明,当微粉替代矿粉时,混合料的物理性能、水稳定性及高温稳定性得到了提高,确定了微粉替代矿粉最佳替代率。微粉在沥青混合料中重金属的存在状态采用多级提取的方法进行分析,试验结果进一步证明了微粉中重金属在沥青混合料中的长期稳定性。为焚烧垃圾飞灰固化稳定化和资源化利用提供了一定的理论指导。     

A Novel Approach for Bolted T-Stub Connections

This paper reports an investigation into new connection types and their behaviors determined using full-scale experiments. T-shaped connections were created using the IPE standard profile. The aim of this study was to analyze the influence of T connections based on the IPE standard profile, height of beam to height of T-stub joint (H) of T-stub joints, and lengths (X) of T-stub joints on the behavior of steel connections, in order to provide the necessary data for improving Eurocode 3 and enable efficient use of residue IPE standard profiles and back to the consumption cycle. While the moment resistance values increased with an increase in H from H_min to H_max in model groups with X of 126 mm, and the energy dissipation increased with an increase in H from H_min to H_max and also with an increase in the lengths (X) of T-stub joints from 54 to 126 mm.     

A model of energy management analysis,case study of a sugar factory in Turkey

This study presents a case study of energy management in a sugar factory in Turkey. The main idea of the study is to analyse energy consumption, the quantity of material production, and figure out a suitable energy efficiency for the case study of a sugar factory subsequently. Firstly, a material production and energy consumption audit were performed for the sugar factory. Secondly, energy efficiency was calculated from the energy data. The SPSS (Statistical Package for the Social Sciences) statistical software was used to ensure the accuracy of the data. The factory’s energy consumption was calculated as 43,590.25 toe (tons of oil equivalent) over the last year. These results were used for CUSUM (Cumulative Sum Deviation Method) graphics. This research poses the consumption of energy, cost of energy and the relationship between energy usage and material production of sugar. The unit of energy cost was 688.22 [$/toe] for the last year. This result showed that the factory decreased the unit of energy by optimisation. The results indicated that the investigated sugar factory should pay attention to the energy management issue in order to comply with the Energy Efficiency of Turkish Law and Directives.     

Thermal,electrical, mechanical and fluidity properties of polyester-reinforced concrete composites

Polyester particles in concrete are preferred because they provide thermal, chemical and water resistance. In this study, thermal conductivity, electrical resistivity, mechanical strength and water resistance properties of concretes containing polyester granules such as flame-retardant polyester, cationic dyeable polyester and polyester with a low melting point-filled concrete have been analyzed using a full factorial design via Minitab^® version 17. The effect of the most influential factors on thermal conductivity of polyester aggregate reinforced concrete composite has been determined as an interaction between the cationic dyeable and low-melt–point polyester. This mixture is suitable for production of thermal insulating concrete. Moreover, it is concluded that cationic dyeable polyester is the highest corrosion- and water-resistant product among the polyesters used in this study. The recovery rate of 33.94% in the thermal conductivity and 214.89% in the electrical resistivity of polyester-reinforced concrete composites has been obtained with a 28-day compressive strength loss of 41.94% according to the reference concrete in the full factorial design application. These results indicate that the polyester-reinforced concrete composites are quite effective in achieving thermal and corrosion resistance concrete but with noticeable compressive strength loss.     

MHD flow in a rectangular duct with a perturbed boundary

The unsteady magnetohydrodynamic (MHD) flow of a viscous, incompressible and electrically conducting fluid in a rectangular duct with a perturbed boundary, is investigated. A small boundary perturbation $\epsilon$ is applied on the upper wall of the duct which is encountered in the visualization of the blood flow in constricted arteries. The MHD equations which are coupled in the velocity and the induced magnetic field are solved with no-slip velocity conditions and by taking the side walls as insulated and the Hartmann walls as perfectly conducting. Both the domain boundary element method (DBEM) and the dual reciprocity boundary element method (DRBEM) are used in spatial discretization with a backward finite difference scheme for the time integration. These MHD equations are decoupled first into two transient convection–diffusion equations, and then into two modified Helmholtz equations by using suitable transformations. Then, the DBEM or DRBEM is used to transform these equations into equivalent integral equations by employing the fundamental solution of either steady-state convection–diffusion or modified Helmholtz equations. The DBEM and DRBEM results are presented and compared by equi-velocity and current lines at steady-state for several values of Hartmann number and the boundary perturbation parameter.     

Palladium-PEPPSI-NHC Complexes Bearing Imidazolidin-2-Ylidene Ligand: Efficient Precatalysts for the Direct C5-Arylation of N-Methylpyrrole-2-Carboxaldehyde

Catalysis Letters - The Pd-catalyzed direct arylation of pyrroles is an important research field for organic synthesis and catalysis chemistry. However, imidazolidin-2-ylidene based Pd-NHC...