Voice spoofing detection based on acoustic and glottal flow features using conventional machine learning techniques

Multimedia Tools and Applications - Automatic Speaker Verification (ASV) systems are vulnerable to spoofing attacks. Most existing spoofing detection systems rely on two main points; the feature...     

Synergistic effect of organoclay fillers based on fluorinated surfmers for preparation of polystyrene nanocomposites

Novel fluorinated reactive surfactants were used for the organic modification of monmorillonite clays. These organoclays were used for the preparation of polystyrene?clay nanocomposites by in‐situ free radical polymerization. Reference systems based on hydrocarbon homologous surfmer and nonpolymerizable surfactants were also used to deduce the effect of the fluorine moiety and the polymerizable function on the morphology and thermal stability of the prepared nanocomposites. Different structural parameters of the surfactants were investigated and modulated for the clay modification including: the nature of surfactant (surfmer/classical surfactant, fluorinated, or hydrocarbonated), the length of the fluorinated chain as well as the length of the hydrocarbon spacers linking the ammonium head to the fluorine chain or the polymerizable acrylic function. Wide angle‐X‐ray scattering (WAXD), thermogravimetric analysis (TGA), and electronic microcopies (TEM and SEM) were used to establish a structure‐morphology, thermal properties relationships, and to highlight the key parameters governing the exfoliation process. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42347.     

Radio‐opaque fecal impaction and pseudo‐occlusion in a dialyzed patient taking lanthanum carbonate

Lanthanum therapy is an efficient therapy of hyperphosphoremia by chelating phosphore in the digestive tract. Lanthanum is a silvery white metallic element that belongs to group 3 of the periodic table. This drug is lightly absorbed and has low water solubility. It should be borne in mind that abdominal X‐rays of patients taking lanthanum carbonate may have a radio‐opaque appearance typical of imaging agents. This characteristic is suggested to confirm adherence of the patient by doing an abdominal X‐ray. We describe in our case a particular good compliant patient with slow digestive transit, which ends by pseudo‐occlusion.     

Macropore formation in p-type silicon: toward the modeling of morphology

The formation of macropores in silicon during electrochemical etching processes has attracted much interest. Experimental evidences indicate that charge transport in silicon and in the electrolyte should realistically be taken into account in order to be able to describe the macropore morphology. However, up to now, none of the existing models has the requested degree of sophistication to reach such a goal. Therefore, we have undertaken the development of a mathematical model (phase-field model) to describe the motion and shape of the silicon/electrolyte interface during anodic dissolution. It is formulated in terms of the fundamental expression for the electrochemical potential and contains terms which describe the process of silicon dissolution during electrochemical attack in a hydrofluoric acid (HF) solution. It should allow us to explore the influence of the physical parameters on the etching process and to obtain the spatial profiles across the interface of various quantities of interest, such as the hole concentration, the current density, or the electrostatic potential. As a first step, we find that this model correctly describes the space charge region formed at the silicon side of the interface.     

Noise estimation for speech enhancement algorithms with post-smoothness processor incorporating global posterior SNR

Multimedia Tools and Applications - Performances of speech enhancement algorithms depend greatly on the accuracy of the estimated noise. In this paper, we explain in details the relationship...     

NARP-HPLC/MS and silver cationization fingerprinting of triacylglycerols in wild and cultivar Tunisian peanut kernels

A simple strategy to identify triacylglycerols (TAGs) in wild and cultivar peanuts was performed using on line coupling of non-aqueous reversed phase chromatography-electrospray ionization–mass spectrometry (NARP-LC-ESI–MS) with silver nitrate (AgNO₃) as a post-column additive. The combination of the structural information given by MS with chromatographic retention laws led to the determination of the structure of TAGs in wild and cultivar peanut oil. In addition, by using the MS⁵ method, the regio-specificity of the TAGs was determined. It was also demonstrated that in Tunisian peanut oil, the saturates have a preference for the sn-1/sn-3 position for the arachidonic and behenic acids. In the wild variety fatty acids with odd numbers of carbons were found and more TAGs were identified in comparison to the cultivar peanut oil.     

First report on the presence of emerging Fusarium mycotoxins enniatins (A,A1, B,B1), beauvericin and fusaproliferin in rice on the Moroccan retail markets

Seventy samples of rice purchased from local markets in six cities from Morocco (Rabat, Casablanca, Kénitra, Mohammadia, Tanger and Errachidia) were analyzed for the presence of six emerging mycotoxins: four enniatins ENs (ENA, ENA₁, ENB and ENB₁), beauvericin (BEA) and fusaproliferin (FUS). Samples were extracted with a mixture of acetonitrile/water (85/15, v/v) by using an ultra-turrax homogenizer. Mycotoxins were then identified and quantified with liquid chromatography (LC) coupled to diode array detector (DAD). Positive samples were confirmed with an LC-MS/MS. Analytical results showed that BEA was present in 75.7% of total analyzed samples. BEA levels varied between 3.8 and 26.3 mg/kg. The frequencies of contamination of samples with total ENs and FUS were 50% and 4.3%, respectively. Among the ENs, ENB was the mycotoxin much more found (30% of total samples), while ENB₁, ENA and ENA₁ were found in 24.6%, 22.8% and 5.7% of total samples, respectively. The high ENs value was registered in a rice sample from kénitra (448.7 mg/kg of ENA₁). This is the first study that describes the presence of emerging Fusarium mycotoxins in rice available in Morocco.     

Total lipid content, fatty acids and 4-desmethylsterols accumulation in developing fruit of Pistacia lentiscus L. growing wild in Tunisia

This research has determined oil, fatty acid and sterol contents of the Tunisian Pistacialentiscus (Lentisc) fruits during maturation. Low oil accumulation was observed during the first 35 days after the fruiting (DAF) date (from 1.83% to 2.57%). After that, two phases were distinguished (35th until the 60th and 105th to the 145th DAF), where the rate of oil accumulation increased significantly. At the last stage of maturation, the lentisc fruits had the highest percentage of lipid content, 42.54%. The changing profile of fatty acids during maturation had been marked mainly by an increase in oleic acid content (from 19.49% to 50.72%) paralleling a decrease in linoleic acid content (from 42.5% to 21.75%). At the 15th DAF, the alpha-linolenic acid was found with a maximum of 13.81%. At full maturity, the main fatty acids were oleic acid, followed by palmitic and linoleic acid. Other fatty acids were present in trace proportions, such as palmitoleic, stearic, linolenic, gadoleic and arachidic acid. In all stages of ripening only four sterols were identified and quantified. β-Sitosterol was the major 4-desmethylsterol in samples tested, followed by campesterol. Cholesterol and stigmasterol were detected in trace amounts. During the first stage of ripening, the amount of total sterols was about 5.19/100 g of oil. It decreased to 0.43/100 g in the last stage. Sitosterol and campesterol showed nearly the same profile during the ripening of P. lentiscus fruit which could be linked to the relation between these compounds during their biosynthesis.     

Investigating the impact of Cloisite® 15A nanoclays on the diffusivity of Irganox 1035 antioxidant in high-density polyethylene nanocomposite

Knowing the diffusion coefficients of antioxidants in packaging materials is essential to assess their effectiveness in protecting materials against oxidation, but also to prevent their eventual migration to food. In this work, the diffusion of a commercial phenolic antioxidant (Irganox 1035) was measured experimentally in pristine high-density polyethylene (HDPE) and in HDPE nanocomposite filled with 3 wt% of nanoclays (Cloisite® 15A). Diffusion experiments were performed using the Roe's method between 60 and 100°C. The local concentration of Irganox1035 in each film was measured by UV–Vis spectroscopy from the UV absorbance at 282 nm. The adjustment of the experimental data by Fick's second law allowed us to deduce the values of the diffusion coefficient of Irganox1035 at each temperature and to show that the temperature dependence of this coefficient obeys an Arrhenius' law. It is shown that the incorporation of 3 wt% of Cloisite®15A into HDPE significantly hinders the diffusion of Irganox 1035 and increases its activation energy. Several mechanistic assumptions could explain this result, first the increase in the tortuosity of diffusion paths, but also the possible establishment of strong intermolecular interactions between the antioxidant and some chemical groups on the nanofiller surface, or even the formation of an interphase with reduced molecular mobility around the nanofillers.     

Comprehensive evaluation of ITO thick films produced under optimum annealing conditions

Indium-tin-oxide (ITO) is a transparent semiconductor that can be formed so that it exhibits a very low resistivity. The applications of this material include solar cells, photodetectors, and transparent contacts for devices such as flat panel displays, and touch sensitive cathode ray tube screens. The authors have investigated the role of both vacuum and reducing atmosphere (N₂ + H₂) annealing on the properties of thick film ITO. Both vacuum annealing and forming gas (N₂ + H₂) annealing result in films with significantly lower resistivity than unannealed films. Samples with sheet resistances of 150 Ω/square have been produced. These values are the lowest reported to date for ITO thick films. Optical characterization including transmission and reflectivity have been conducted, as well as examination of the conductivity as a function of temperature.