Investigation of the changes in physical properties of PES/PVC fabrics after aging

The aim of this work was to investigate the physical and mechanical performance of architectural polyester (PES)–poly(vinyl chloride) (PVC) membranes exposed to different artificial aging conditions. Two commercially available architectural membranes were chosen as research objects. The durability of the PES/PVC fabrics was evaluated by the loss in mechanical performance, scanning electron microscopy, and X-ray diffraction analysis in order to understand the effect of the degradation agents on the surface of the membranes. The mechanical performance of the PES/PVC membranes was unchanged. Scanning electron microscopy images of the tested materials showed initial cracks after aging. The X-ray fluorescence analysis showed that at the time of aging, the amount of Cl and Si decreased slightly, while Ti decreased by half, and Ca by volume increased twice. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47523.     

The BsmI vitamin D receptor restriction fragment length polymorphism (bb) influences the effect of calcium intake on bone mineral density

Previous studies of the vitamin D receptor (VDR) polymorphisms and bone mineral density (BMD) have suggested that there may be differences in calcium absorption among groups of women with different VDR genotypes, and that the association may be stronger in younger women. To investigate the association between the VDR polymorphisms and BMD, this study was undertaken in the Framingham Study Cohort and a group of younger volunteers. Subjects from the Framingham Study (ages 69-90 years) included those who underwent BMD testing and who had genotyping for the VDR alleles (n = 328) using polymerase chain reaction methods and restriction fragment length polymorphisms with BsmI (B absence, b presence of cut site). A group of younger volunteer subjects (ages 18-68) also underwent BMD testing and VDR genotyping (n = 94). In Framingham Cohort subjects with the bb genotype, but not the Bb or BB genotypes, there were significant associations between calcium intake and BMD at five of six skeletal sites, such that BMD was 7-12% higher in those with dietary calcium intakes greater than 800 mg/day compared with those with intakes < 500 mg/day. The data also suggested that BMD was higher in persons with the bb genotype only in the group with calcium intakes above 800 mg/day. No significant differences were found in the Framingham Cohort for age-, sex-, and weight-adjusted BMD at any skeletal site between those with the BB genotype and those with the bb genotype regardless of 25-hydroxyvitamin D levels or country of origin. In the younger volunteers, BMD of the femoral neck was 5.4% higher (p < 0.05) in the bb genotype group compared with the BB group and 11% higher (p < 0.05) in males with the bb genotype compared with the BB group. There were no significant differences at the lumbar spine. In this study, the association between calcium intake and BMD appeared to be dependent upon VDR genotype. The findings of an association between dietary calcium intake and BMD only in the bb genotype group suggests that the VDR genotype may play a role in the absorption of dietary calcium. Studies that do not consider calcium intake may not detect associations between VDR genotype and BMD. In addition, the association between VDR alleles and BMD may become less evident in older subjects.     

Muscle mass and fat mass in relation to bone mineral density in very old men and women: the Framingham Heart Study

Aim of the study was investigate the cross-sectional relationship between body composition and bone mineral density (BMD) in very old men and women. The study sample consisted of 504 women and 285 men, aged 72-93 yr, participating in examination 22 (1992-1993) of the Framingham Heart Study. Total body BMD, regional BMD, and soft-tissue body composition was measured by dual-energy X-ray absorptiometry. Both muscle mass and percentage body fat were positively associated with total body BMD in women. After adjustment for age, physical activity, smoking status, estrogen use, and thiazide use, BMD increased with increasing tertile of muscle mass (p = 0.007) and with increasing tertile of percentage body fat (p = 0.0001) in women. In men muscle mass, not percentage body fat, was positively associated with BMD. After adjustment for potential confounders, BMD remained associated with muscle mass only (p = 0.02). These results were similar for leg BMD and arm BMD. The study suggests that the influence of muscle and fat mass on bone mineral density is different between very old men and women.     

Determination of the Optimal Fourier Number on the Dynamic Thermal Transmission

This article represents the result of experimental research on transient heat transfer in a multilayered (heterogeneous) wall. Our non-steady thermal transmission simulation is based on a finite-difference calculation method. The value of a Fourier number shows the similarity of thermal variation in conditional layers of an enclosure. Most scientists recommend using no more than a value of 0.5 for the Fourier number when performing calculations on dynamic (transient) heat transfer. The value of the Fourier number is determined in order to acquire reliable calculation results with optimal accuracy. To compare the results of simulation with experimental research, a transient heat transfer calculation spreadsheet was created. Our research has shown that a Fourier number of around 0.5 or even 0.32 is not sufficient (\({\approx }17\,\%\) of oscillation amplitude) for calculations of transient heat transfer in a multilayered wall. The least distorted calculation results were obtained when the multilayered enclosure was divided into conditional layers with almost equal Fourier number values and when the value of the Fourier number was around 1/6, i.e., approximately 0.17. Statistical deviation analysis using the Statistical Analysis System was applied to assess the accuracy of the spreadsheet calculation and was developed on the basis of our established methodology. The mean and median absolute error as well as their confidence intervals has been estimated by the two methods with optimal accuracy (\({F}_{\mathrm{oMDF}}= 0.177\) and \(F_{\mathrm{oEPS}}= 0.1633\) values).     

A user-friendly PC-based data acquisition and analysis system for respirometric investigations

We have developed an easy-to-use computer-based system for recording, displaying, storing and analyzing signals generated by Clark-type oxygen electrodes. A user-friendly interface of Windows-based program BioMed significantly increases the productivity of investigations. It allows to process, control, present and archive the experimental data in real time. A 12-bit analog-to-digital-converter, analog and digital filters, a possibility to zoom the obtained respiratory curves and calculation of the respiration rates by a linear regression method increase the resolution of the estimated oxygen consumption rates. The new system enables to register even small changes, such as 3-5 ngatoms O/min, in respiration rates of biological objects -- enzymes, mitochondria and permeabilized muscle fibers. The system has been developed and is regularly used for the respirometric investigations at the Laboratory of Biochemistry, Institute for Biomedical Research, Kaunas University of Medicine.     

Synthesis and characterization of zirconia-magnesia inert matrix fuel: Ce homolog studies

X-ray powder diffraction, microscopy, thermal analysis and electron probe microanalysis were used to characterize a ZrO₂-MgO inert matrix containing CeO₂ as a homolog for PuO₂ and Er₂O₃ as a burnable poison. The synthesis was carried out using a precipitation method. A large composition range of MgO to ZrO₂ was evaluated to determine phases present, phase mixing, phase composition, microstructure and thermal properties. It was found that most compositions of the material consist of two phases: MgO (periclase) and ZrO₂ (cubic zirconia). The zirconia phase incorporates 5% (wt/wt) MgO and up to 14% and 12% (wt/wt) CeO₂ and Er₂O₃, respectively. The MgO phase remains pure, which will enable it to retain its heat transfer and solubility properties and will improve the overall thermal conductivity and reprocessing component of the inert matrix fuel. The results with Ce will be used as the basis of future studies with actinides.     

Clinorotation Effect on Response of Cress Leaves to Red and Far-Red Light

Responses of cress (Lepidium sativum L.) seedling leaves to separate and simultaneous illumination with red (660 nm) and far-red (735 nm) light were studied under fast clinorotation (50 rpm) and usual gravity (1g) conditions. The monochromatic light emitting diodes (LEDs) have been used for illumination of seedlings from above. The growth and spatial orientation of leaves and the location of presumable gravisensors in petioles were analysed. Clinorotation in the dark promoted the radial expansion of leaf lamina and unfolding of leaves. It was shown that clinorotation in red light inhibited significantly the elongation of petioles as compared with that under the action of gravity force. Simultaneous red and far-red illumination promoted the growth of petioles under clinorotation, but did not affect the orientation of laminas, which remained the same as of the 1-g control ones. Red light, applied separately and simultaneously with far-red light, guided the bending of laminas as well as the unfolding of leaf petioles in both usual and clinorotation conditions. Histological and cytological analyses of petioles revealed the presence of movable amyloplasts in endodermic cells in proximal region of petioles. Comparison of intracellular positioning of amyloplasts in petioles of leaves grown under clinorotation and the action of gravity allows a presumption that these plastids may be identified as gravisensors of garden cress leaves. The obtained data imply that clinorotation and exposition to monochromatic red light or simultaneous illumination by red and far-red light affect the elongation of petioles of cress seedling leaves. Spectral components guide the unfolding of laminas in a gravity-independent manner.