Investigation of the changes in physical properties of PES/PVC fabrics after aging

The aim of this work was to investigate the physical and mechanical performance of architectural polyester (PES)–poly(vinyl chloride) (PVC) membranes exposed to different artificial aging conditions. Two commercially available architectural membranes were chosen as research objects. The durability of the PES/PVC fabrics was evaluated by the loss in mechanical performance, scanning electron microscopy, and X-ray diffraction analysis in order to understand the effect of the degradation agents on the surface of the membranes. The mechanical performance of the PES/PVC membranes was unchanged. Scanning electron microscopy images of the tested materials showed initial cracks after aging. The X-ray fluorescence analysis showed that at the time of aging, the amount of Cl and Si decreased slightly, while Ti decreased by half, and Ca by volume increased twice. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47523.     

Fast removal of Pb(II) and Cu(II) from contaminated water by groundwater treatment waste: impact of sorbent composition

ABSTRACT

A non-hazardous groundwater treatment waste (GWTW) was examined as a low-cost sorbent for Pb(II) and Cu(II) ions. The content of the dominant elements in GWTW was as follows: 78% Fe₂O₃, 7.4% P₂O₅, 7.4% CaO and 5.2% SiO₂. The removal of Pb(II) and Cu(II) was fast, and more than 67–95% of ions were accumulated by GWTW during the first 3 min. The sorption capacity of GWTW depends on solution pH, concentration and temperature. Equilibrium data fitted well with Langmuir–Freundlich and Langmuir-partition models. The inherently formed nano-adsorbent could be utilized for the treatment of water contaminated with Pb(II) and Cu(II) ions.     

Investigation of hydrogen generation from sodium borohydride using different cobalt catalysts

Effective Co/Cu, CoB/Cu, and CoBM (M = Mo,Zn,Fe)/Cu catalysts were prepared on the copper surface by a simple electroless deposition method using a morpholine borane as a reducing agent in the glycine solution. The activity of the deposited catalysts was investigated for hydrogen generation from an alkaline sodium borohydride solution. It was determined that these synthesized catalysts demonstrated the catalytic activity for the hydrolysis reaction of NaBH₄. The lowest obtained activation energy (E_A) of the hydrolysis reaction of NaBH₄was 27 kJ mol^?1 for the CoBMo/Cu catalyst. The hydrogen generation rate of 15.30 ml min^?1 was achieved using CoBMo/Cu catalysts at 313 K and it increased ~3.5 times with the increase of temperature to 343 K. The highest hydrogen generation rate obtained by CoBMo/Cu films may be related to the hierarchical cauliflower-shaped 3D structures and the high roughness surface area. Moreover, the CoBMo/Cu catalyst showed an excellent reusability.     

A topic network analysis of the system turn in the environmental sciences

Scientometrics - The concept of Earth system science denotes a shift in the scientific discourse from disciplinary accounts of isolated components of the global environment towards the holistic and...     

Clinorotation Effect on Response of Cress Leaves to Red and Far-Red Light

Responses of cress (Lepidium sativum L.) seedling leaves to separate and simultaneous illumination with red (660 nm) and far-red (735 nm) light were studied under fast clinorotation (50 rpm) and usual gravity (1g) conditions. The monochromatic light emitting diodes (LEDs) have been used for illumination of seedlings from above. The growth and spatial orientation of leaves and the location of presumable gravisensors in petioles were analysed. Clinorotation in the dark promoted the radial expansion of leaf lamina and unfolding of leaves. It was shown that clinorotation in red light inhibited significantly the elongation of petioles as compared with that under the action of gravity force. Simultaneous red and far-red illumination promoted the growth of petioles under clinorotation, but did not affect the orientation of laminas, which remained the same as of the 1-g control ones. Red light, applied separately and simultaneously with far-red light, guided the bending of laminas as well as the unfolding of leaf petioles in both usual and clinorotation conditions. Histological and cytological analyses of petioles revealed the presence of movable amyloplasts in endodermic cells in proximal region of petioles. Comparison of intracellular positioning of amyloplasts in petioles of leaves grown under clinorotation and the action of gravity allows a presumption that these plastids may be identified as gravisensors of garden cress leaves. The obtained data imply that clinorotation and exposition to monochromatic red light or simultaneous illumination by red and far-red light affect the elongation of petioles of cress seedling leaves. Spectral components guide the unfolding of laminas in a gravity-independent manner.     

A Critical Assessment of Experimental Methods for Determining the Dynamic Mechanical Characteristics of Shape Memory Polymers

Experimental study of temperature‐ and frequency‐dependent properties of the commercially available shape memory polymer Tecoflex? EG 72D (TFX) (Lubrizol, USA) using dynamic mechanical analysis (DMA) technique is presented. Temperature scan DMA tests have been carried out in three distinct deformation modes, uniaxial tension, three‐point bending, and simple torsion, using two different testing rigs at different test parameters (frequency, strain amplitude, and heating rate) in temperatures ranging from below to above the glass transition temperature. The influence of different test parameters and some discrepancies in the temperature‐dependent storage and loss moduli (and hence the loss factor) measured by DMA in different deformation modes are discussed.