Optimisation of rancidity stability in long‐chain PUFA concentrates obtained from a rainbow trout (Oncorhynchus mykiss) by‐product

This research was focused on the production of polyunsaturated fatty acid concentrates from a farmed rainbow trout (Oncorhynchus mykiss) by‐product (i.e. belly muscle). The effect of different process variables (urea/fatty acids (FA) contents ratio, crystallisation time and temperature and stirring speed of the urea/FA mixture) on the lipid oxidation development during the urea complexation process was investigated. For this purpose, an experimental design (26 runs) following the response‐surface methodology was developed. As a result, peroxide value and TOTOX index showed to be dependent on the crystallisation time and temperature and the urea/FA ratio, while no influence of the crystallisation stirring speed was detected on both indices; additionally, polyene index was affected by the urea/FA ratio and its interaction with the crystallisation time. An optimised desirability score near 1.0 was attained provided values of 2.8 °C, 3.05 h and 3.57 were applied for crystallisation temperature, crystallisation time and urea/FA ratio, respectively.     

Digestibility and nutritional value of crude oil from three amaranth species

Oils from a selection ofAmaranthus caudatus, A. hypochondriacus andA. cruentus were extracted with hexane. The crude oils were analyzed for acid value, saponification and iodine number, and were included in basal casein diets for rat studies at 5 and 10% levels to replace equal amounts of refined cottonseed oil. The oils fromA. cruentus andA. hypochondriacus were similar in the oil properties studied and different fromA. caudatus. At either 5 or 10% food intake levels, weight gain and PER were not statistically different from values reported for cottonseed oil. True digestibility of amaranth oil was lower than that of cottonseed oil.A. cruentus oil gave the lowest digestibility. Oil levels induced statistical differences in food intake and digestibility. Oils fromA. caudatus, A. hypochondriacus and cottonseed induced similar serum cholesterol levels, while oil fromA. cruentus gave statistically higher values. Hemoglobin, hematocrit and serum proteins were similar among all groups. Microscopic analysis of the organs of the rats revealed some changes that were also found in cottonseed oil-fed rats. It was concluded that crude amaranth oil has lower digestibility than cottonseed oil, but that it is not responsible for growth-depressing effects when the seed is fed raw as compared to processed materials.     

Hydrothermal Synthesis and Characterization of Europium-doped Barium Titanate Nanocrystallites

Nano-Micro Letters - Barium titanate nanocrystallites were synthesized by a hydrothermal technique from barium chloride and tetrabutyl titanate. Single-crystalline cubic perovskite BaTiO3...     

Magnetic polystyrene–palygorskite nanocomposite obtained by heterogeneous phase polymerization to apply in the treatment of oily waters

Water contaminated by oil poses challenges to the management of water resources. Magnetic nanoparticles has been issue of different potential applications including remotion oil from water. Magnetic polystyrene–palygorskite nanocomposites were prepared by a heterogeneous phase polymerization for the removal of organic contaminants from water. The organo‐Fe₃O₄‐palygorskite nanoparticles were coated with polystyrene, forming water repellent and oil absorbing surfaces to promote the removal of oil from the surfaces of nanocomposites by applying an external magnetic field. X‐ray fluorescence, X‐ray diffraction, scanning electron microscopy, zeta potential and size distribution measurement, surface area determination by BET, density measurement by He pycnometry, carbon grade determination, thermogravimetric analysis, Fourier‐transform infrared spectroscopy, Raman spectroscopy, and evaluation of hydrophobicity by contact angle were used to characterize the nanoparticles. The magnetic nanocomposite obtained showed excellent hydrophobicity, around 78° contact angle. In addition, oil removal capability tests were also performed, according to which the preliminary results indicated removal of approximately 98% of oil in synthetic oily water samples. The oil–water separation using this magnetic nanocomposite provides a promising alternative strategy for water treatment. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46162.     

Hybrid ceramic-polymer material for wood coating with high wearing resistance

The synthesis and characterization of a hybrid ceramic-polymer coating with high wearing resistance and designed to cover wood surfaces, are reported in this work. This hybrid material provides a high wearing resistance (400% higher than a conventional commercial product typically used to protect these surfaces); additionally it has a high UV resistance and high transparency and gloss. The wood surfaces were previously treated either with a primer coating or with a special coupling agent, before the hybrid coating was applied; in both cases, good adhesion with the substrate was obtained. Electronic Publication     

Eu-Doped BaTiO3 Powder and Film from Sol-Gel Process with Polyvinylpyrrolidone Additive

Transparent BaTiO₃:Eu³⁺ films were prepared via a sol-gel method and dip-coating technique, using barium acetate, titanium butoxide, and polyvinylpyrrolidone (PVP) as modifier viscosity. BaTiO₃:Eu³⁺ films ~500 nm thick, crystallized after thermal treatment at 700 ºC. The powders revealed spherical and rod shape morphology. The optical quality of films showed a predominant band at 615 nm under 250 nm excitation. A preliminary luminescent test provided the properties of the Eu³⁺ doped BaTiO₃.     

A Low-Protein,High-Carbohydrate Diet Increases Fatty Acid Uptake and Reduces Norepinephrine-Induced Lipolysis in Rat Retroperitoneal White Adipose Tissue

A low-protein, high-carbohydrate (LPHC) diet for 15 days increased the lipid content in the carcass and adipose tissues of rats. The aim of this work was to investigate the mechanisms of this lipid increase in the retroperitoneal white adipose tissue (RWAT) of these animals. The LPHC diet induced an approximately two- and tenfold increase in serum corticosterone and TNF-α, respectively. The rate of de novo fatty acid (FA) synthesis in vivo was reduced (50%) in LPHC rats, and the lipoprotein lipase activity increased (100%). In addition, glycerokinase activity increased (60%), and the phosphoenolpyruvate carboxykinase content decreased (27%). Basal [U-¹⁴C]-glucose incorporation into glycerol-triacylglycerol did not differ between the groups; however, in the presence of insulin, [U-¹⁴C]-glucose incorporation increased by 124% in adipocytes from only control rats. The reductions in IRS1 and AKT content as well as AKT phosphorylation in the RWAT from LPHC rats and the absence of an insulin response suggest that these adipocytes have reduced insulin sensitivity. The increase in NE turnover by 45% and the lack of a lipolytic response to NE in adipocytes from LPHC rats imply catecholamine resistance. The data reveal that the increase in fat storage in the RWAT of LPHC rats results from an increase in FA uptake from circulating lipoproteins and glycerol phosphorylation, which is accompanied by an impaired lipolysis that is activated by NE.     

Biodegradable PLA based nanocomposites for packaging applications: The effects of organo-modified bentonite concentration

The effects of concentration and surface modification of two Brazilian bentonite clays on nanocomposites' properties based on polylactic acid – (PLA) were investigated. The samples were prepared by the extrusion/injection method to obtain biodegradable packaging plastics. The raw materials and their bionanocomposites were characterized by various techniques. Natural clay samples presented a size of around 2 μm while the modified ones' size was 5–6 μm, probably due to the presence of cetyltrimethylammonium bromide in the interlayer space. The particle size and the contact angle increased with the treatment and the clay's density decreased. The organoclays were homogeneously dispersed in PLA, which can be associated with the interactions between PLA chains' carbonyl groups and the organoclays. The bionanocomposites present modified clay particles axis aligned to the flow direction of the extruder/injector. Chocolate organoclay acts as a nucleating agent to PLA crystal growth, increasing the sample's crystallinity, while Bofe organoclay interferes with the amorphous chain's mobility and diminishes the sample's crystallization. The addition of both organoclays to PLA diminished the sample's elongation at break and strength, although the organoclays increased the sample's Young modulus, even though Bofe organoclay is more active in PLA amorphous phase and Chocolate organoclay on the crystalline one.