Neutronic study on the effect of first wall material thickness on tritium production and material damage in a fusion reactor

In this study, the effects of changing first wall materials and their thicknesses on a reactor were investigated to determine the displacement per atom（DPA） and gas production（helium and hydrogen） in the first wall, as well as the tritium breeding ratio（TBR） in the coolant and tritium breeding zones. Therefore, the modeling of the magnetic fusion reactor was determined based on the blanket parameters of the International Thermonuclear Experimental Reactor（ITER）. Stainless steel（SS 316 LNIG）, Oxi...     

Effect of Messaging Model on the Reliable Data Transfer Latency in a Fog System

Journal of Network and Systems Management - IoT applications have become a pillar for enhancing the quality of life. However, the increasing amount of data generated by IoT devices places pressure...     

Fabrication and characterization of in-situ Al3Ni intermetallic and CeO2 particulate-reinforced aluminum matrix composites

Al-xNi-yCeO₂ (x = 6, 10, 15, 20 and y = 0, 5, 10 wt%) composites were produced by a powder metallurgical production route. Powder mixtures of Al, Ni and CeO₂ were fabricated via mechanical alloying (MA) for 4 h in a Spex-type high-energy ball mill. Both the mechanically alloyed (MAed) and non-MAed (as-blended mixtures) powders were pre-compacted in a hydraulic press under 650 MPa and then pressurelessly consolidated at 630 °C for 2 h under an inert atmosphere. The effects of MA process and the amounts of Ni and CeO₂ on the microstructural, mechanical and tribological properties of the sintered composites were determined. Based on the SEM and XRD investigations, the MAed powders illustrated a homogenous structure, comprising flaky particles with smaller crystallite sizes and greater lattice strain. According to the XRD analysis, Ni formed Al–Ni intermetallic compounds in the matrix of sintered composites that act as secondary reinforcement phases. The SEM observations conducted on the MAed samples demonstrated more uniformly and finely distributed Al₃Ni and CeO₂ phases in the microstructure of the MAed samples, unlike the non-MAed ones. The hardness values of sintered composites increased due to the MA process and increasing Ni and CeO₂ amounts, and the hardness value of the MAed Al20Ni–10CeO₂ sample reached 179 HV. The ultimate compressive strength and failure strain of the MAed Al6Ni–10CeO₂ sample were 441 MPa and 11.3%. In the Al20Ni–10CeO₂ sample, the compressive strength and failure strain were 391 MPa and 5.5%, respectively. Additionally, the reciprocating wear test results illustrated that both wear resistance and hardness values of the composites increased as the amounts of Ni and CeO₂ increased, and the Al20Ni–10CeO₂ sample exhibited the highest wear resistance as 0.175 × 10^-3 mm³/Nm.     

Developing microencapsulated 12‐hydroxystearic acid (HSA) for phase change material use

Phase change materials (PCM) have an increasingly more important role as a thermal energy storage (TES) media. However, leakage problem of PCM causes limitation during their integration in TES systems. Therefore, the encapsulation of PCMs is attracting research interest to extend usage of PCMs in real TES applications in recent years. In this study, hydroxystearic acid (HSA) was encapsulated with polymethyl methacrylate (PMMA) and different PMMA comonomer shells via emulsion polymerization method for the first time in literature. HSA with high melting temperature range (74–78°C) can widen the scope of using PCMs, and the encapsulated form can make it more versatile. The chemical structures, morphologies, and thermophysical properties of capsules were determined by FT‐IR, SEM, DSC, TGA, and thermal infrared camera. Among the produced HSA capsule candidates, PMMA‐HEMA is the most promising with latent heat of 48.5 J/g with melting range of 47 to 85°C. SEM analysis indicated that the capsules have spherical shape with compact surface at nano‐micro (100–440 nm) size range; however, some capsules exhibited agglomeration.     

Time Dependent Ambient Oxidation of AA6061-T6 Alloy at the Temperature of 580°C

Protection of Metals and Physical Chemistry of Surfaces - The AA6061-T6 alloy is used in many industrial applications such as hydraulic pistons, aerospace and marine vehicle fittings, including the...     

Anonymous location sharing in urban area mobility

Knowledge and Information Systems - This work studies the location-privacy preserving location update in the context of data-centric people mobility applications. The mobility model involves an...