Optimizing PSMA Radioligand Therapy for Patients with Metastatic Castration-Resistant Prostate Cancer. A Systematic Review and Meta-Analysis

The aim of the review was to evaluate patient and treatment characteristics for patients with metastatic castration-resistant prostate cancer (mCRPC) treated with PSMA radioligand therapy (PRLT) associated with above-average outcome. The systematic review and meta-analysis followed recommendations by the Preferred Reporting Items for Systematic reviews and Meta-Analysis (PRISMA). We searched for publications in PubMed, Embase, and ClinicalTrials.gov up to 31 September 2020. Thirty-six publications and four duplicates reported 2346 patients. Nearly two-thirds of the patients had bone metastases. Median overall survival (OS) was 16 months. Asymptomatic patients and patients with only lymph node metastases lived longer than symptomatic patients and patients with more extensive metastases. Patients treated with an intensified schedule of ¹⁷⁷Lu PRLT lived longer than those treated with a conventional schedule. Half of the patients obtained a PSA decline ≥ 50% and these patients lived longer than those with less PSA decline. Approximately 10% of the patients developed hematologic toxicity with anemia grade 3 as the most severe adverse effect. Characteristics for patients, cancer, restaging, and PRLT predict above average overall survival following treatment with PRLT.     

Prioritization methodology of dangerous substances for water quality monitoring with scarce data

Monitoring and control of dangerous substances discharged into receiving waters have attracted more attention lately. Since it is not possible to analyze every single substance, a prioritization methodology is needed for the selection of those to be monitored. Existing well-developed models require significant amount of data for reliable outcomes. This paper presents a methodology to prioritize the dangerous substances having adverse effects on freshwaters in Turkey, where data are scarce. Such a methodology will also serve as a solid model for other countries with limited background data. The adopted methodology enabled the elimination of chemicals to generate a candidate list composed of 608 substances among more than 5000 substances. Further screening and prioritization were conducted using different assessment methods (i.e., Total Hazard Value, Total Impact Value, Combined Monitoring-based, and Modelling-based Priority Setting) to obtain a proposed Final Candidate Specific Pollutants List of 150 dangerous substances. The proposed Candidate National Pollutant List of Turkey was established by combining 45 priority pollutants of the European Union with a list of candidate specific pollutants. According to the outcomes of this study, monitoring and controlling of 195 dangerous substances in freshwaters are recommended. Further detailed studies should be conducted in order to observe the actual levels of these dangerous substances in freshwaters followed by a review of the monitoring list accordingly. Moreover, further revisions might be required in the proposed list due to some possible versatile conditions in terms of sampling points (i.e., change in the location of industries).     

Mode I fracture toughness determination with straight notched disk bending method

A new method called the straight notched disk bending method is developed for mode I fracture toughness determination using rock cores. Disk specimens of andesite and marble having a single straight edge notch were subjected to three-point bending loads. Dimensionless stress intensity factor estimations and fracture toughness tests were conducted for different notch lengths, span lengths, thicknesses and diameters of the cylindrical rock specimens. Stress intensity factors were computed by three-dimensional finite element modeling and the results were presented for a wide range of specimen geometrical parameters. Results of experiments were compared to the results of well-known mode I fracture toughness testing methods. For specimens having thickness equal to the radius, mode I fracture toughness was lower and close to the results obtained by semi-circular bending method. When thickness was increased and doubled, mode I fracture toughness increased and approached to the value found by the suggested cracked chevron notched Brazilian disk method. Advantages of the new method included easy specimen preparation and testing procedure, stiffer specimen geometry, smaller fracture process zone, and flexibility of the specimen geometry for the investigation of the size effect behavior.     

Epicardial fat thickness is associated with impaired coronary flow reserve in hemodialysis patients

Cardiovascular disease (CVD) is the main cause of mortality in hemodialysis (HD) patients. Epicardial fat tissue (EFT) is a new risk factor in CVD. The aim of this study was to evaluate the association between EFT and coronary artery flow reserve (CFR), which is an early indicator of endothelial dysfunction in coronary vessels of HD patients. We performed a cross‐sectional study including 71 chronic HD patients and 65 age‐ and sex‐matched healthy controls. Epicardial fat tissue was significantly higher in HD patients when compared to healthy controls (6.53 ± 1.01 mm vs. 5.79 ± 1.06 mm, respectively, P < 0.001). On transthoracic Doppler echocardiography, CFR values were significantly lower in HD patients when compared to healthy controls (1.73 ± 0.11 vs. 2.32 ± 0.28, P < 0.001). Correlation analysis showed CFR values to be inversely correlated with EFT (r = ?0.287, P < 0.05). Multiple linear regression analysis was used to define independent determinants of EFT in HD patients. Artery flow reserve, age, body mass index and total cholesterol levels were independently correlated with EFT thickness. This study demonstrated that EFT was significantly higher among HD patients compared to healthy controls. In addition, this study was the first to demonstrate an inverse correlation between EFT and CFR in this patient population.     

Gold recovery from dilute gold solutions using DEAE-cellulose

The present work investigates gold recovery using DEAE-cellulose, a common biopolymer derivative, from synthetically prepared diluted gold-bearing solutions of 50 ppm. The effects of different recovery parameters on gold recovery efficiency were studied in detail. It was demonstrated that gold recovery efficiency increased with an increasing amount of sorbent, as well as increasing contact time. A gold recovery efficiency of 99% was attained under conditions of 20–40 g DEAE-cellulose per liter at a shaking rate of 130 rpm for 30 min at room temperature. On the other hand, with smaller amounts of sorbent (6 g/l), it was also possible to recover gold from the solution with 99% efficiency when the reaction temperature was increased to 60 °C. The shaking rate and temperature were demonstrated to play a vital role in the recovery process. It was also found that gold recovery by DEAE-cellulose is an intermediate-controlled process with an activation energy of 37.11 kJ/mol. The XRD pattern and SEM images revealed that the recovered gold was in the metallic form.     

Capacity factor prediction and planning in the wind power generation industry

The common practice to calculate wind generation capacity values relies more on heuristic approximations than true system estimations. In this paper we proposed a more accurate method. In the first part of our analysis, a Monte Carlo simulation was created based on Markov chains to provide an independent estimate of the true behavior of wind farm capacity value as a function of system penetration. With this curve as a baseline, a technique for using beta distributions to model the input variables was adopted. A final step to increase accuracy involved the use of numerical convolution within the program to eliminate summation estimates.     

Resonant frequency of an air gap tuned circular disc microstrip antenna

In this study, the formulation and the computation of the resonant frequency of an air gap tuned circular disc microstrip antenna are simplified, with improved accuracy, by using a new and very simple effective permittivity expression which is valid for thin and thick gaps. Very good agreement between the theoretical and the experimental resonant frequency values is obtained for the various structural parameters and operational modes.     

Adaptive educational hypermedia accommodating learning styles: A content analysis of publications from 2000 to 2011

Implementing instructional interventions to accommodate learner differences has received considerable attention. Among these individual difference variables, the empirical evidence regarding the pedagogical value of learning styles has been questioned, but the research on the issue continues. Recent developments in Web-based implementations have led scholars to reconsider the learning style research in adaptive systems. The current study involved a content analysis of recent studies on adaptive educational hypermedia (AEH) which addressed learning styles. After an extensive search on electronic databases, seventy studies were selected and exposed to a document analysis. Study features were classified under several themes such as the research purposes, methodology, features of adaptive interventions and student modeling, and findings. The analysis revealed that the majority of studies proposed a framework or model for adaptivity whereas few studies addressed the effectiveness of learning style-based AEH. Scales were used for learning style identification more than automatic student modeling. One third of the studies provided a framework without empirical evaluation with students. Findings on concrete learning outcomes were not strong enough; however, several studies revealed that suggested models influenced student satisfaction and success. Current trends, potential research gaps and implications were discussed.     

Synthesis and characterization of epoxy based nanocomposites

Epoxy‐clay nanocomposites were synthesized to examine the effects of the content and type of different clays on the structure and mechanical properties of the nanocomposites. Diglycidyl ether of bisphenol‐A (epoxy) was reinforced by 0.5–11 wt % natural (Cloisite Na⁺) and organically modified (Cloisite 30B) types of montmorillonite. SEM results showed that as the clay content increased, larger agglomerates of clay were present. Nanocomposites with Cloisite 30B exhibited better dispersion and a lower degree of agglomeration than nanocomposites with Cloisite Na⁺. X‐ray results indicated that in nanocomposites with 3 wt % Cloisite 30B, d‐spacing expanded from 18.4 Å (the initial value of the pure clay) to 38.2 Å. The glass transition temperature increased from 73°C, in the unfilled epoxy resin, to 83.5°C in the nanocomposite with 9 wt % Cloisite 30B. The tensile strength exhibited a maximum at 1 wt % modified clay loading. Addition of 0.5 wt % organically modified clay improved the impact strength of the epoxy resin by 137%; in contrast, addition of 0.5 wt % unmodified clay improved the impact strength by 72%. Tensile modulus increased with increasing clay loading in both types of nanocomposites. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 1081–1086, 2005