A 1D High Performance Thin Layer Chromatography Method Validated to Quantify Phospholipids Including Cardiolipin and Monolysocardiolipin from Biological Samples

The aim of this study is to identify high performance thin layer chromatography (HPTLC) conditions allowing the separation and quantification of mammalian cellular phospholipids (PLs) (sphingomyelin, phosphatidylcholine, phosphatidylserine, phosphatidylinositol, phosphatidylethanolamine, and especially phosphatidic acid, cardiolipin, and monolysocardiolipin, these latter two being specifically located in mitochondria membranes). In order to make this method faster and easier, a 1D HPTLC method is chosen, testing several eluents as well as several staining methods. A pre‐conditioning of HPTLC plates with boric acid and a copper staining reagent followed by carbonization are selected for the quality of PL separation and homogeneity of staining. The selected conditions are discussed and the method validation is performed according to the International Conference on Harmonization guidelines. Linearity is effective between 1 and 8 µg and limit of quantification is between 0.5 and 2.3 µg depending on PL classes. Precision measurements show coefficients of variation <6%, and when amounts are close to the detection limit, <12%. Lipid extracts of tumor cell lines or isolated mitochondria are used to assess PL profiles. This shows that the HPTLC method can be used routinely to follow level variations of PLs. Practical Applications: The changes in PL composition play a crucial role in tumor processes and regulate cellular functions modulating cellular signaling or mitochondrial metabolism. The simple and cost‐effective 1D HPTLC method that is developed is applied to lipid extracts of whole tumor cells or hepatocyte‐isolated mitochondria. It is sensitive as well as precise to detect variations of phosphatidic acid or cardiolipin levels linked to physio‐pathological conditions. It can also be used to investigate the composition changes of other membrane PLs. Moreover, with a simultaneous analysis of 14 samples/standards on the same plate (six plates per day), this method is adapted for large series of samples.     

Experimental study and numerical modeling of mixing by air injection in yield stress fluids using the OpenFOAM software

Mixing by gas injection is an operation used in industrial processes such as wastewater treatment, metallurgy, or methanization in which pressurized gas is injected into a fluid in order to reduce concentrations and temperatures gradients. This study demonstrates how the CFD toolbox OpenFOAM can be used to simulate such flows. Experimental measurements and observations have been performed on a pilot-scale reactor where pressurized air is injected in a yield stress fluid. The volume of fluid method and an adaptive mesh with refinement at the interface have been used to track the gas inclusions. The numerical model accuracy has been assessed by comparing experimental and numerical results related to the bubble's frequency, dimensions, and rising velocities as well as the fluid recirculation, yielded, and unyielded regions in the tank. The influence of injection parameters such as the injection flow rate and the fluid rheological parameters has been quantified.     

Gadolinium‐Doped Persistent Nanophosphors as Versatile Tool for Multimodal In Vivo Imaging

Recent breakthroughs in the rational development of multifunctional nanocarriers have highlightened the advantage of combining the complementary forces of several imaging modalities into one single nanotool fully dedicated to the biomedical field and diagnosis applications. A novel multimodal optical‐magnetic resonance imaging nanoprobe is introduced. Designed on the basis of a spinel zinc gallate structure doped with trivalent chromium and gadolinium, this nanocrystal bears the ability to serve as both a highly sensitive persistent luminescence nanoprobe for optical imaging, and a negative contrast agent for highly resolved magnetic resonance imaging (MRI). Additional proof is given that surface coverage can be modified in order to obtain stealth nanoparticles highly suitable for real‐time in vivo application in mice, showing delayed reticulo‐endothelial uptake and longer circulation time after systemic injection.     

Benchmarking flexible job-shop scheduling and control systems

Benchmarking is comparing the output of different systems for a given set of input data in order to improve the system’s performance. Faced with the lack of realistic and operational benchmarks that can be used for testing optimization methods and control systems in flexible systems, this paper proposes a benchmark system based on a real production cell. A three-step method is presented: data preparation, experimentation, and reporting. This benchmark allows the evaluation of static optimization performances using traditional operation research tools and the evaluation of control system's robustness faced with unexpected events.     

Palm oil deodorizer distillate as toughening agent in polylactide packaging films

Polylactide (PLA) is the most used biodegradable and biobased food packaging polymer for rigid containers and films. However, its low ductility is a hurdle for increasing its applications in flexible food packaging. A solution is the use of additives. Palm oil deodorizer distillate (PODC) is revealed to be an excellent additive promoting PLA ductility. PODC is a by‐product of vegetable oil refining, which is available in stable quality and in sufficient amounts. Amorphous PLA/PODC blends had an elongation at break of around 130% and that of semi‐crystalline blends was still around 55% compared to the initial 5% of neat PLA. At the same time the PLA rigidity and high glass transition temperatures were kept. PODC was also a very efficient processing aid, allowing for film blow extrusion. The blends were stable in properties during six months without exudation. They complied with legal norms of Food Contact Materials (EU 10/2011) and induced no sensorial alteration of packed food. Therefore PODC is a very interesting alternative to common plasticizers for the production of flexible PLA packaging films. © 2016 Society of Chemical Industry     

Refractory concretes uniaxial compression behaviour under high temperature testing conditions

Two refractory concretes with the same matrix composition, one based on andalusite aggregate and the other on bauxite aggregate, have been studied at temperatures ranging from room temperature to 1200 °C maximal temperature. Samples dried at 110 °C during 24 h to create dried standard specimens and others, fired at different temperatures, were subjected to several uniaxial compression test conditions conducted at various temperatures. The evolution of the materials’ global behaviour from quasi-brittle to viscous was evidenced and correlated to their microstructure evolution. Loading/unloading, creep, and strain rate jump tests helped define the damageable and viscoplastic nature of the behaviour. The influence of the firing temperature and duration on the materials’ behaviour is also reported and discussed. In conclusion, potential constitutive equations that are able to fit the material recorded behaviour are suggested.     

Crack propagation in brittle heterogeneous solids: Material disorder and crack dynamics

Crack propagation in a linear elastic material with weakly inhomogeneous failure properties is analyzed. An equation of motion for the crack is derived in the limit of slow velocity. Predictions of this equation on both the average crack growth velocity and its fluctuations are compared with recent experimental results performed on brittle heterogeneous materials (Ponson in Phys Rev Lett, 103, 055501; Måløy et al. in Phys Rev Lett, 96, 045501). They are found to reproduce quantitatively the main features of crack propagation in disordered systems. This theoretical framework provides new tools to predict life time and fracture energy of materials from their properties at the micro-scale.     

Effects of uniaxial stress on alkali–silica reaction induced expansion of concrete

asr affected concrete in real structures is usually subject to loads which affect the macroscopic expansion of the material. An experimental study was undertaken using sensors embedded in reactive and non-reactive samples loaded on modified creep frames. Numerical analysis was used to link micro-structural damage under the load to expansion. We show that load influences the micro-crack propagation, which changes the shape of the expansion curve.     

Stability study of cermet-supported solid oxide fuel cells with bi-layered electrolyte

Performance and stability of five cermet-supported button-type solid oxide fuel cells featuring a bi-layered electrolyte (SSZ/SDC), an SSC cathode, and a Ni-SSZ anode, were analyzed using polarization curves, impedance spectroscopy, and post-mortem SEM observation. The cell performance degradation at 650 °C in H₂/air both with and without DC bias conditions was manifested primarily as an increase in polarization resistance, approximately at a rate of 2.3 mΩ cm² h⁻¹ at OCV, suggesting a decrease in electrochemical kinetics as the main phenomenon responsible for the performance decay. In addition, the initial series resistance was about ten times higher than the calculated resistance corresponding to the electrolyte, reflecting a possible inter-reaction between the electrolyte layers that occurred during the sintering stage. In situ and ex situ sintered cathodes showed no obvious difference in cell performance or decay rate. The stability of the cells with and without electrical load was also investigated and no significant influence of DC bias was recorded. Based on the experimental results presented, we preliminarily attribute the performance degradation to electrochemical and microstructural degradation of the cathode.