Densities and Viscosities of Oleic Acid at Atmospheric Pressure

The densities of oleic acid were measured over the temperature range from (293 to 459) K at atmospheric pressure using a densimeter based on the modified hydrostatic weighing method. The dynamic viscosities of the same oleic acid sample were measured using a capillary viscometer (VPZ-2 m) in the range from (293 to 363) K at atmospheric pressure. The combined expanded uncertainty of the density, atmospheric pressure, viscosity, and temperature measurements at the 95% confidence level with a coverage factor of k = 2 is estimated to be 0.15%, 1.0%, 3.5%, and 15 mK, respectively. The values of uncertainty for density and viscosity include the effects of purity and calibration (total expanded uncertainty). These experimental data were used to develop wide-range correlations for the density and viscosity based on theoretically confirmed Arrhenius–Andrade and Vogel-Tamman-Fulcher (VTF) models. The value of the glass temperature ( T _g= 179.78 K.) for the oleic acid was estimated using the VTF parameters derived from the present viscosity measurements. To additionally validate the reliability of the measured density data, the same oleic acid samples were measured using the pycnometric method. The present study showed that the densities measured using the modified hydrostatic weighing densimeter (HWD) agree with the values obtained using the pycnometric method within 0.09% for Sample 1 and 0.25% for Sample 2.     

Techno‐economic analysis of FiWi access networks based on optimized source packet traffic

Fiber wireless access networks (FiWi) are capable of providing broadband 100 Mbit/s services with acceptable costs and can be considered as a competitive alternative to fiber to the home (FTTH). Techno‐economic analysis of viable FiWi architectures is needed in order to obtain the most suitable solution taking into account both technical and economical viewpoints. In this paper, a new approach to techno‐economic analysis of the FiWi networks is proposed. The proposed approach is based on the net present value calculation with the source packet traffic generation rate and traffic intensity as input parameters. As a precondition to net present value calculation, a traffic optimization procedure that assures the quality of experience is performed. Case study results indicate the usability of the proposed method.     

The effect of different pollutants exposure on the pigment content of pigmented macrophage aggregates in the spleen of Vardar chub (Squalius vardarensis Karaman, 1928)

Pigmented macrophage aggregates (MAs) are known to change under influence of various factors, such as aging, season, starvation, and/or pollution. In this study, changes in the pigment content of the MAs in the spleen of Vardar chub (Squalius vardarensis, Karaman) (n = 129) collected in spring and autumn, from three rivers with different pollution impact was examined: Zletovska River (metals), Kriva River (metals and municipal wastewater), and Bregalnica River (municipal wastewater). Collected data revealed increased relative volume and number of MAs containing hemosiderin under the influence of metals, significant in autumn (p < .05). In chub exposed to metals combined with municipal wastewater, significant increase of lipochrome accumulation in MAs in autumn, melanin in MAs in fish captured in the spring season, and number of splenic MAs containing combination of melanin and lipochrome was noted. Volumes and number of MAs containing combination of hemosiderin and lipochrome increased in spleen of fish captured in autumn from both Zletovska River and Kriva River, most likely due to the contribution of hemosiderin and lipochrome, respectively. Values measured for the various pigments in splenic MAs in fish captured from Bregalnica River, were overall closer to the values measured for fish captured from Kriva River. Notably, melanin and lipochrome are more likely to be found in fish from waters influenced by municipal wastewater (organic pollution) and hemosiderin in fish spleen from water influenced by mining activity (heavy metals pollution).     

Light stability in cyan and magenta tones using standard and highly chromatic toner particles

An increasing requisite regarding the reproduction quality of electrophotographic printing machines demands improvement of new electrophotographic toner formulation, especially used pigments. The subject of this paper is a comparison of prints realised by depositing high chroma (HC) and standard emulsion aggregation (EA) toner on gloss fine art paper. HC toner has a different composition of the cyan and magenta tones compared with the corresponding standard EA toner tones and therefore behaves differently under real conditions. The patches used for this experiment were cyan and magenta tone prints with tone values (TVs) of 0, 20, 60 and 100%. Ultraviolet (UV) degradation was measured over time intervals of 0, 6, 12, 24, 48, 96, 144 and 240 h for all patches. Results (laboratory values) were calculated using colorimetric difference. Values were plotted as a function of time in tonal degradation graphs. A model was created using non‐linear regression‐based modelling. The experiment demonstrates that magenta patches are more susceptible to degradation in comparison with cyan patches. With the increase in tonal value, it is noticeable that the colorimetric difference is higher. Colorimetric differences calculated using HC magenta toner and standard EA cyan toner (100% TV) were higher than ?E = 5, starting to appear after 6 h of exposure to UV radiance. After 12 h of exposure, colorimetric differences of standard magenta tones that were greater than ?E = 5 also started to appear. Cyan patches (100% TV) printed with HC toner were more stable than the other patches, and after 240 h of exposure had not crossed the boundary of ?E = 5.     

Characterisation of flavour compounds in Biska – a herbal spirit produced with mistletoe

Mistletoe (Viscum album) is mostly used in its herbal form owing to its content of diverse biologically active substances. In Croatia's Adriatic region, it is used for production of Biska, a strong alcoholic beverage produced by maceration of mistletoe in spirit or brandy, with or without the addition of honey. In this work, Biska was characterised by analysis of aroma compounds and physicochemical parameters and is the first study of the aroma profile of a strong alcoholic beverage produced with mistletoe. The aroma of 14 samples of Biska – five commercial and nine homemade – was analysed using GC/MS with solid‐phase microextraction. A total of 166 aroma compounds were detected. Major components were ethyl esters (medium and long chain fatty acids), fatty alcohols, isopropyl myristate, aldehyde decanal and some terpenes. The distribution of aroma compounds was evaluated by principal component analysis. Some significant differences in physicochemical properties were observed including ethanol concentration (28–44% v/v) and pH (4.4–6.5). Although the colour of Biska was light brown with greenish reflections, there were differences in chromatic parameters. The commercial samples were darker and were less transparent than homemade Biska, perhaps reflecting more extensive maceration/extraction or the addition of caramel. © 2018 The Institute of Brewing & Distilling     

Factors affecting the microbial populations at full-scale enhanced biological phosphorus removal (EBPR) wastewater treatment plants in The Netherlands

The influence of operating and environmental conditions on the microbial populations of the enhanced biological phosphorus removal (EBPR) process at seven full-scale municipal activated sludge wastewater treatment plants (WWTPs) in The Netherlands was studied. Data from the selected WWTPs concerning process configuration, operating and environmental conditions were compiled. The EBPR activity from each plant was determined by execution of anaerobic-anoxic-aerobic batch tests using fresh activated sludge. Fractions of Accumulibacter as potential phosphorus accumulating organisms (PAO), and Competibacter, Defluviicoccus-related microorganisms and Sphingomonas as potential glycogen accumulating organisms (GAO) were quantified using fluorescence in situ hybridization (FISH). The relationships among plant process configurations, operating parameters, environmental conditions, EBPR activity and microbial populations fractions were evaluated using a statistical approach. A well-defined and operated denitrification stage and a higher mixed liquor pH value in the anaerobic stage were positively correlated with the occurrence of Accumulibacter. A well-defined denitrification stage also stimulated the development of denitrifying PAO (DPAO). A positive correlation was observed between Competibacter fractions and organic matter concentrations in the influent. Nevertheless, Competibacter did not cause a major effect on the EBPR performance. The observed Competibacter fractions were not in the range that would have led to EBPR deterioration. Likely, the low average sewerage temperature (12+/-2 degrees C) limited their proliferation. Defluviicoccus-related microorganisms were seen only in negligible fractions in a few plants (<0.1% as EUB), whereas Sphingomonas were not observed.     

Fuzzy gain-scheduling control of a gas-liquid separation plant implemented on a PLC

In the paper an approach to the non-linear control of a gas-liquid separation plant is presented. To solve the problem the fuzzy gain-scheduling method was used and implemented on a programmable logic controller (PLC). Velocity-based linearization approach was used for control system design and implementation for the first time in process control application. Emphasis was placed on the appropriate adaptation of the method and some important implementation issues. The algorithm was carefully designed and tested by using ordinary simulation, hardware-in-the-loop simulation, and experiments on the real plant. The results show that the proposed approach substantially improves the closed-loop performance of the plant.     

Intelligent forest fire monitoring system

This paper presents iForestFire, an Environmental Monitoring Information System for forest fire protection. The system is composed of several components, each having a particular function. Automatic fire detection is a crucial component of the system. It is based on various complex image processing algorithms. Complexity of the system also emerges from integration, based on multi agent technology, of different environment information. The presented system contributes to the environment protection and is in use in Croatia for several years.