采动覆岩卸荷膨胀累积效应

地下煤层开采引起的岩层运动是一系列安全和环境问题的根源,研究采动岩层运动规律是安全、高效、绿色开采的重要基础。通过对岩层运动过程的研究,揭示了采动覆岩卸荷膨胀累积效应及其对岩层运动规律的影响机制。研究表明:采动覆岩经历了卸荷膨胀与再压实的动态过程。受关键层结构控制,上覆岩层由下向上成组破断运动,关键层破断前,阻断了上覆载荷向下方岩层的传递,导致其因卸荷而产生膨胀,包括碎胀与弹性膨胀。随着关键层破断高度增加,覆岩卸荷高度同步增大,因卸荷而膨胀的岩层总厚度不断增大;同时卸荷煤岩也受到已破断关键层载荷的压实作用,从而造成覆岩卸荷膨胀总量的不断变化。将这种覆岩卸荷膨胀总量随覆岩卸荷高度动态变化的现象定义为采动覆岩卸荷膨胀累积效应,进而建立了理论模型,并通过淮北海孜煤矿巨厚火成岩下采煤覆岩裂隙实测进行了验证。结果表明,采动覆岩卸荷膨胀累积效应对采动岩层运动规律产生了重要影响,如影响覆岩关键层下离层量,影响覆岩关键层贯通破断的高度,影响不同开采条件的地表下沉系数等。采动覆岩卸荷膨胀累积效应改变了对离层存在形式的传统认识,该效应的存在导致关键层下最大离层量一般小于采高的10%,覆岩可注浆充填空间并非传统认识上的“离层区”,而主要是注浆充填压力“压实”作用下将覆岩卸荷累积膨胀所转化出的那部分空间,该发现指导了覆岩隔离注浆充填绿色开采技术的创新研发及其在建筑物压煤开采中的成功实践。     

理工科专业基础课程教学辅助网站的定位与建设——以建筑力学课程为例

伴随着计算机网络技术的迅猛发展和终端设备的迅速普及,利用网络资源进行辅助教学成为必然的趋势。但是,在各高校推广网络教学资源,建设各类教学网站的过程中,也暴露出一些问题,突出表现在部分教学工作者对教学网站的辅助教学作用定位不准,网站内容与课堂教学内容脱节,网站建设过程过于繁复且难以维护等方面。文章在深入探讨高校专业基础课教学网站的定位和建设目标的基础上,结合广州大学建筑力学课程的教学实践,建立了一个示范性的理工科专业基础课程辅助教学网站。网站内容涵盖了基本课程信息、教学资源共享、拓展资源推介、教学论坛平台等多个方面。特别是教学论坛的建设,开辟了一个师生在线互动的平台,有效解决了教师答疑时间和学生课下学习时间难以配合的矛盾。教师在教学论坛上的答疑和学生之间的相互讨论,对于提高学习兴趣,促进对相关力学问题的深入理解,提高教学质量,都有十分重要的意义。     

Microwave-Assisted Pretreatment of Sago Palm Bark

Three types of microwave-assisted diluted solvents were employed using 0.1 N H₂SO₄ (MSA), 0.1 N NaOH (MSH), and 0.01 N NaHCO₃ (MSB). These solvents were evaluated as possible pretreatment routes for sago palm bark (SPB) with their effects on the pretreated substrate. A variety of analyses, consisting of fiber analysis, energy dispersive X-ray spectroscopy (EDX), X-ray fluorescence spectrometer (XRF), X-ray powder diffraction (XRD), thermogravimetric analysis (TGA), scanning electron microscope (SEM), and high-performance liquid chromatography (HPLC), were performed to understand the pretreatment effects on the chemical and physical characteristics of SPB and pretreatment liquor. The thermal analysis has revealed that higher hemicellulose degradation was also found in MSA pretreatment. In the analyses of the pretreatment liquid for the extracted monomeric sugar, a higher amount of glucose was found (9 mg/g) using MSH pretreatment and the highest xylose level was found (4 mg/g) using MSA pretreatment. The analysis of the formation of inhibitors has shown that acetic acid was only found in the MSH pretreatment.     

Stress analysis of nano porous material using computed tomography images

Sintered silver materials possess an advantage that allows excellent bonding between chips and their substrate. Stress manifests as the materials resistance against external and internal forces, however during stress analysis the complex physical behavior caused by the forces and the nature of the material is often disregarded by researchers. This paper analyses the stress behavior of nano porous sintered silver in X and Y directions using finite element modelling. This study also focuses on observing the growth of the crack in samples in different directions. It is found that the occurrence of the cracks in the specimens starts at the peak stress point and the failure is observed at the largest void. It is also detected that the stress across the whole area of the model is regularly distributed in those samples which have relatively smaller voids. Thus, these samples have a better material integrity. In addition, this fact indicates that the material in these sample could hold higher levels of stress. Finally, the level of the stress and the possibility of failure in those samples that have smaller voids is found to be less than others.     

β-FeSi_2(n)/c-Si(p)HIT型太阳能电池的模拟与优化

运用afors-het软件对β-FeSi2(n)/a-Si(i)/c-Si(p)结构的太阳能电池进行模拟,依次讨论了本征层、发射层、界面态对电池性能的影响。结果表明:添加本征层电池性能提高,但随着本征层厚度的增加载流子收集率下降、串联电阻增大,造成电池光电转化效率下降;发射层厚度的增加使得载流子的收集率下降造成光电转化效率下降,同时发射层掺杂浓度增大虽然使得内建电场强度增大,但载流子的复合也会加大,最终使得电池性能保持稳定;界面态使得电池性能下降,为使电池获得较好性能,界面态密度应尽可能小于1011 cm–2·e V–1。通过优化,最终使得该结构的太阳能电池光电转化效率达到17.00%。     

Combination of Ag Substrate Decoration with Introduction of?BaZrO3 Nano-Inclusions for?Enhancing Critical Current Density of?YBa2Cu3O7 Films

The combination of two methods: Ag substrate decoration and introduction of BZO nano-inclusions has been used in a pulsed laser deposition (PLD) method to increase the critical density (J _c ) of YBCO films. The films were deposited on single crystal SrTiO₃ (STO) substrates decorated with various architecture of Ag nano-dots. We have studied the diameter and density of Ag nano-dots and their influence on J _c of BZO-added YBCO films. We found that 15 laser pulses on the Ag target gives an optimum result in increasing J _c in comparison with BZO-doped YBCO films of the same thickness in self-field and low applied magnetic fields. A higher number of laser pulses on the Ag target led to increasing critical current density in high applied magnetic fields only (above 2 T). We have studied films of the thickness from 0.4 ??m to 3.8 ??m and found that the highest J _c at all applied fields investigated is achieved for a 1.2 ??m thick film. The transmission electron microscopy clearly shows BZO nano-rods that provide strong c-axis pinning centres in the films.     

光伏储能站能量调度管理策略

以低负荷时刻优先充电、高负荷时刻优先放电为原则,以削峰填谷为目的,实现极大化光伏发电利用率,建立了光伏储能站能量管理的数学模型。模型包括常规调度控制策略和紧急调度控制策略,常规调度可以实现无故障情况下的储能电池的充放电功率控制,紧急控制可以在电网故障情况下短时间内实现常规用户的用电需求。研究结果表明,光储一体调度管理策略可推迟设备容量升级提高系统调峰能力,提高电网经济效益。     

Stabilization of oil-in-water emulsions by enzyme catalyzed oxidative gelation of sugar beet pectin

Enzyme catalyzed oxidative cross-linking of feruloyl groups can promote gelation of sugar beet pectin (SBP). It is uncertain how the enzyme kinetics of this cross-linking reaction are affected in emulsion systems and whether the gelation affects emulsion stability. In this study, SBP (2.5% w/v) was mixed into an oil-in-water emulsion system (4.4% w/w oil, 0.22% w/w whey protein, pH 4.5). Two separate, identically composed, emulsion systems were prepared by different methods of preparation. The emulsions prepared separately and subsequently mixed with SBP (referred as Mix A) produced significantly larger average particle sizes than the emulsions in which the SBP was homogenized into the emulsion system during emulsion preparation (referred as Mix B). Mix B type emulsions were stable. Enzyme catalyzed oxidative gelation of SBP helped stabilize the emulsions in Mix A. The kinetics of the enzyme catalyzed oxidative gelation of SBP was evaluated by small angle oscillatory measurements for horseradish peroxidase (HRP) (EC 1.11.1.7) and laccase (EC 1.10.3.2) catalysis, respectively. HRP catalyzed gelation rates, determined from the slopes of the increase of elastic modulus (G′) with time, were higher (P < 0.05) than the corresponding laccase catalyzed rates, but the final G′ values were higher for laccase catalyzed gels, regardless of the presence of emulsions or type of emulsion preparation (Mix A or Mix B). For both enzymes, rates of gelation in Mix A were higher (P < 0.05) than in Mix B, and higher stress was needed to break the gels in Mix A than in Mix B at similar enzyme dosage levels. These differences may be related to a lower availability of the feruloyl groups for cross-linking when the SBP was homogenized into the emulsion system during preparation.