Kinetics and Mechanism of Low-Grade Manganese Ore Reduction by Natural Gas

Metallurgical and Materials Transactions B - The calcination and the reduction behaviors of a low-grade manganese ore by methane was studied at 973 K to 1273 K by several techniques. The onset...     

Functional Chromatography Reveals Three Natural Products that Target the Same Protein with Distinct Mechanisms of Action

Access to lead compounds with defined molecular targets continues to be a barrier to the translation of natural product resources. As a solution, we developed a system that uses discrete, recombinant proteins as the vehicles for natural product isolation. Here, we describe the use of this functional chromatographic method to identify natural products that bind to the AAA+ chaperone, p97, a promising cancer target. Application of this method to a panel of fungal and plant extracts identified rheoemodin, 1‐hydroxydehydroherbarin, and phomapyrrolidone A as distinct p97 modulators. Excitingly, each of these molecules displayed a unique mechanism of p97 modulation. This discovery provides strong support for the application of functional chromatography to the discovery of protein modulators that would likely escape traditional high‐throughput or phenotypic screening platforms.     

Synthesis of Gemini‐Like Methyl Acrylate‐Acrylic Acid‐Methyl Acrylate Triblock Copolymers Surfactants by RAFT Polymerization in Solution and Investigation of their Behavior at the Air–Water Interface

A series of methyl acrylate‐acrylic acid amphiphilic triblock copolymers (PMA‐PAA‐PMA) were prepared by solution polymerization using S,S′‐bis (α,α‐dimethy1acetic acid) trithiocarbonate (BDAT) as a reversible addition fragmentation chain transfer (RAFT) agent and methyl acrylate (MA) as the first monomer. The triblock copolymers and their common MA homopolymer precursors were characterized in terms of their compositions, molecular weights and behavior at the air–water interface using ¹H‐NMR spectroscopy, thermogravimetric analysis, gel permeation chromatography, surface tension, transmission electron microscopy (TEM) and dynamic light scattering respectively. The results indicated that PMA‐PAA‐PMA was successfully synthesized through RAFT polymerization. The polydispersity index (PDI) decreased when the molar ratio [n(MA)/n(AA)] increased, the lowest PDI was obtained at 5.23 wt% RAFT and the molecular weights were consistent with the theoretical value as the RAFT agent percentage varied. The polymer neutralized by sodium hydroxide solution shows a low critical micelle concentration (CMC), which was <10^?2 mol L^?1 in water. The A_min values increased and showed a maximum with decreased AA chain length. TEM showed that the neutralized polymer formed a special vesicle structure with large pore structure which led to a low CMC and surface tension of water.     

Characterization of a Si-SiO2 Mixture Generated from SiO(g) and CO(g)

Metallurgical and Materials Transactions B - The reaction between SiO(g) and CO(g) is a relevant intermediate reaction in the silicon production process. One of the products generated from this gas...     

Estimating the Effective Metal-Mould Interfacial Heat Transfer Coefficient via Experimental-Simulated Cooling Curve Convergence

The design of improved casting systems requires accurate modeling of metal cooling processes. This can only be accomplished after determining the interfacial heat transfer coefficient (IHTC) between a solidifying casting and its mould. In the current work, a simple and robust inverse heat conduction technique was applied for the estimation of the effective IHTC between an aluminum alloy casting and a steel permanent mould during solidification. The solidification of the alloy at varying mould preheating temperatures was monitored using a thermocouple, and the experimental cooling curves were compared with curves simulated by casting solidification modeling software. The IHTC value applied to the software was varied until its output converged with the experimental data, leading to an estimation of 6000 W/m²K for this system. This technique is useful as a preliminary tool in materials modeling, and it will promote the development of improved casting processes without the need for excessive experimentation.     

Multifunctional Nanochemistry: Ambient,Electroless, Template-Based Synthesis and Characterization of Segmented Bimetallic Pd/Au and Pd/Pt Nanowires as High-Performance Electrocatalysts and Nanomotors

Segmented noble-metal nanowires (NWs) represent an exciting, multifunctional, one-dimensional, structural architecture with a variety of potential applications. However, the widespread use of electrodeposition in the preparation of these systems has limited their potential to be produced on a large scale, since this protocol is costly and requires complex processes and caustic reaction media. Given the inherent limitations of electrodeposition, we report, for the first time, an ambient, surfactantless, template-based approach that is not only sustainable but also efficient for the reliable production of Pd/Pt and Pd/Au segmented NWs, possessing two spatially separated, chemically distinctive, but elementally pure, axial subunits. Our simple two-step synthetic approach allows for direct and predictable control over the relative segment lengths in these nanomaterials. Moreover, thorough structural characterization of these as-prepared samples confirms that our segmented NWs maintain high-quality, crystalline, elementally pure subunits with a well-defined interface between the constituent metals. In the context of preparing segmented NWs as multifunctional nanostructures, we demonstrate that these as-prepared NWs achieve high levels of performance when employed as both electrocatalysts and nanomotors.     

Impact of Material on Crankshaft Torsional Vibrations

In this study, it shows how the main indicators of torsional vibrations of the crankshaft change when its materials change. In the study, the crankshaft of diesel engine with four cylinders in line was taken, in which the material is changing from steel to cast iron, due to the technological possibilities of production. For study of torsional vibration of crankshaft system, the construction of equivalent reduced scheme is carried. Reduced inertia moments of discs are determined for each crank of crankshaft, by receiving the impact of piston group and rod mass. Reduced rigidities of crank are determined by experimental method. The results show that the rigidity of crank for the same crankshaft varies up to 6%, while the change between crankshafts goes up 10%. At the end, frequency and vibration forms are calculated using Tole-Holxer method. From calculations, it results that the frequencies are 19% smaller, while the vibration forms varies slightly. In this case, the change of the materials leads to the first frequency in the area of engine rotations and it can worsen the level of torsional vibration, therefore, it should check the resonance areas and vibration amplitude.