Structure and thermoelectric properties of higher manganese silicides synthesized by pack cementation

Higher manganese silicides (HMS) are promising alternative materials for middle to high temperature thermoelectric applications as a low-cost, non-toxic and highly stable p-type leg. Many of the preparation methods that have been reported previously require long-time and energy consuming processes, as well as expensive equipment, and often do not result in a material of sufficient quality. In this study, the simple, cost-effective and eco-friendly technique of pack cementation is applied. HMS powders synthesized at different experimental conditions are studied and compared considering their structure, composition, short-term thermal stability in air and thermoelectric properties. X-ray diffraction analysis, X-ray photoelectron spectroscopy, scanning electron microscopy, thermogravimetry and thermoelectric measurements (in terms of Seebeck coefficient, electrical and thermal conductivity) were employed for the characterization of the material and evaluation of its performance. All samples were identified as HMS and only some negligible traces of MnSi were detected. They moderately oxidize when heated non-isothermally under air atmosphere up to 1473 K, while the presence of HMS remains dominant even at such high temperatures. Their thermoelectric properties were remarkable for an undoped material, with a maximum figure of merit (ZT) of 0.47 at 777 K. Pack cementation appeared to have a great potential as the synthesis route of high-efficiency HMS.     

A Systematic Review and Meta-Analysis of Pharmacogenetic Studies in Patients with Chronic Kidney Disease

Chronic kidney disease (CKD) is an important global public health problem due to its high prevalence and morbidity. Although the treatment of nephrology patients has changed considerably, ineffectiveness and side effects of medications represent a major issue. In an effort to elucidate the contribution of genetic variants located in several genes in the response to treatment of patients with CKD, we performed a systematic review and meta-analysis of all available pharmacogenetics studies. The association between genotype distribution and response to medication was examined using the dominant, recessive, and additive inheritance models. Subgroup analysis based on ethnicity was also performed. In total, 29 studies were included in the meta-analysis, which examined the association of 11 genes (16 polymorphisms) with the response to treatment regarding CKD. Among the 29 studies, 18 studies included patients with renal transplantation, 8 involved patients with nephrotic syndrome, and 3 studies included patients with lupus nephritis. The present meta-analysis provides strong evidence for the contribution of variants harbored in the ABCB1, IL-10, ITPA, MIF, and TNF genes that creates some genetic predisposition that reduces effectiveness or is associated with adverse events of medications used in CKD.     

Effect of moisture on salmonella spp. heat resistance in cocoa and hazelnut shells

The heat resistance of food-poisoning outbreak and non-outbreak associated strains of Salmonella (S. Enteritidis, S. Montevideo, S. Napoli, S. Oranienburg, S. Poona, S. Senftenberg and S. Typhimurium) was established in confectionery-related materials such as crushed cocoa bean and hazelnut shells at low moisture contents (≤ 4% w/w). The two most heat resistant strains in cocoa and hazelnut shells at ca. 4% w/w moisture were S. Oranienburg and S. Enteritidis PT30. Both strains were associated with outbreaks from dried materials. Their D_100°C values were ca. 2.5 min in crushed cocoa bean shells and 7–11 min in crushed hazelnut shells. Addition of moisture to ca. 7% w/w markedly reduced D-values (D_80°C of 2–4.5 min) for both strains in the two matrices.     

Volatile fraction of commercial thyme honeys produced in Mediterranean regions and key volatile compounds for geographical discrimination: A chemometric approach

The aim of the present study was to investigate the volatile fraction and discriminate 34 commercial thyme honeys from Morocco, Egypt, Spain, and Greece according to geographical origin, using key volatile compounds in combination with chemometrics. Sixty-two volatile compounds belonging to different classes were identified and semi-quantified using headspace solid phase micro-extraction coupled to gas chromatography/mass spectrometry (HS-SPME-GC/MS). Applying chemometric analyses to 17 volatiles (p < 0.05), honeys were successfully discriminated according to geographical origin. Correct classification rate was 88.2% using the cross-validation method. Volatile compounds proved to be a powerful tool for discriminating commercial thyme honeys from different countries.     

Colour and fastness of natural dyes: revival of traditional dyeing techniques

Cotton and wool fabrics were dyed with nine natural dyes obtained by aqueous extraction of the original plants/insect in an attempt to reconstruct traditional textile dyeing recipes, to optimise the methodology at all stages, i.e. extraction, mordanting and dyeing, and to standardise it. Cochineal, madder, alkanna, henna, brazilwood, red sandalwood, safflower, indigo and logwood were used for the dyeings, which were carried out directly and after mordanting of the textile material. A variety of mordants, namely, aluminium potassium sulphate, potassium dichromate, copper sulphate, zinc chloride, iron(iii ) chloride, iron(ii ) sulphate and tin chloride, is anticipated to meet both early and recent requirements and options. The dyeings were evaluated through colour measurements and standard wash, light and rub fastness tests. Generally, the mordanting process known for many centuries and connected with the textile dyeing resulted in an improvement in dye absorption and fastness properties mainly for the cotton samples, as is concluded from the tests and measurement assessments.     

Influence of electrolyte co-additives on the performance of dye-sensitized solar cells

The presence of specific chemical additives in the redox electrolyte results in an efficient increase of the photovoltaic performance of dye-sensitized solar cells (DSCs). The most effective additives are 4-tert-butylpyridine (TBP), N-methylbenzimidazole (NMBI) and guanidinium thiocyanate (GuNCS) that are adsorbed onto the photoelectrode/electrolyte interface, thus shifting the semiconductor's conduction band edge and preventing recombination with triiodides. In a comparative work, we investigated in detail the action of TBP and NMBI additives in ionic liquid-based redox electrolytes with varying iodine concentrations, in order to extract the optimum additive/I₂ ratio for each system. Different optimum additive/I₂ ratios were determined for TBP and NMBI, despite the fact that both generally work in a similar way. Further addition of GuNCS in the optimized electrolytic media causes significant synergistic effects, the action of GuNCS being strongly influenced by the nature of the corresponding co-additive. Under the best operation conditions, power conversion efficiencies as high as 8% were obtained.     

Effects of chromium (VI) addition on the activated sludge process

The effect of hexavalent chromium, Cr(VI), addition on various operating parameters of activated sludge process was evaluated. To accomplish this, two parallel lab-scale continuous-flow activated sludge plants were operated. One was used as a control plant, while the other received Cr(VI) concentrations equal to 0.5, 1, 3 and 5 mgl(-1). Cr(VI) concentrations of 0.5 mgl(-1) caused significant inhibition of the nitrification process (up to 74% decrease in ammonia removal efficiency). On the contrary, the effect of Cr(VI) on organic substrate removal was minor for concentrations up to 5 mgl(-1), indicating that heterotrophic microorganisms are less sensitive to Cr(VI) than nitrifiers. Activated sludge floc size and structure characterization showed that Cr(VI) concentrations higher than 1 mgl(-1) reduced the filaments abundance, causing the appearance of pin-point flocs and free-dispersed bacteria. Additionally, the variability of protozoa and rotifers was reduced. As a result of disperse growth, effluent quality deteriorated, since significant amounts of suspended solids escaped with the effluent. Termination of Cr(VI) addition led to a partial recovery of the nitrification process (up to 57% recovery). Similar recovery signs were not observed for activated sludge floc size and structure. Finally, shock loading to the control plant with 5 mgl(-1) Cr(VI) for 2 days resulted in a significant inhibition of the nitrification process and a reduction in filamentous microorganisms abundance.     

Does the presence of desert dust modify the effect of PM10 on mortality in Athens, Greece?

Recent reports investigate whether windblown desert dust may exacerbate the short-term health effects associated with particulate pollution in urban centers. We have tested this hypothesis by using daily air pollution and mortality data for Athens, Greece during the period 2001-2006.We investigated the effects of exposure to particulate matter with aerodynamic diameter < 0 μg/m³ (PM₁₀) on total and cause specific mortality, during days with and without windblown desert dust, for all ages, stratified by age groups and by sex. We identified 141 dust days between 2001 and 2006. We used Poisson regression models with penalized splines to control for possible confounding by season, meteorology, day of the week and holiday effect.A 10 μg/m³ increase in PM₁₀ was associated with a 0.71% (95% confidence interval (CI): 0.42% to 0.99%) increase in all deaths. The effects for total and cause specific mortality were greater for those ≥ 75 years of age, while for total mortality higher effects were observed among females. The main effect of desert dust days and its interaction with PM₁₀ concentrations were significant in all cases except for respiratory mortality and cardiovascular mortality among those < 75 years. The negative interaction pointed towards lower particle effects on mortality during dust events.We found evidence of modification of the adverse health effects of PM₁₀ on mortality in Athens, Greece with desert dust events: the particle effects were significantly higher during non-desert dust days. Our analyses indicate that traffic related particles, which prevail on non-desert dust days, have more toxic effects than the ones originating from long-range transport, such as Sahara dust.     

The job demands-resources model of burnout.

The job demands-resources (JD-R) model proposes that working conditions can be categorized into 2 broad categories, job demands and job resources, that are differentially related to specific outcomes. A series of LISREL analyses using self-reports as well as observer ratings of the working conditions provided strong evidence for the JD-R model: Job demands are primarily related to the exhaustion component of burnout, whereas (lack of) job resources are primarily related to disengagement. Highly similar patterns were observed in each of 3 occupational groups: human services, industry, and transport (total N?=?374). In addition, results confirmed the 2-factor structure (exhaustion and disengagement) of a new burnout instrument—the Oldenburg Burnout Inventory—and suggested that this structure is essentially invariant across occupational groups. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

A multigroup analysis of the job demands-resources model in four home care organizations.

The job demands-resources (JD-R) model was tested in a study among 3,092 employees working in 1 of 4 different home care organizations. The central assumption in the model is that burnout develops when certain job demands are high and when job resources are limited because such negative working conditions lead to energy depletion and undermine worker motivation and learning opportunities, respectively. A series of multigroup structural equation modeling analyses provide strong evidence for the JD-R model. Specifically, results showed that job demands are primarily and positively related to the exhaustion component of burnout, whereas job resources are primarily related to cynicism (negatively) and professional efficacy (positively). The theoretical and practical implications of the JD-R model are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)