Study of the refractory used in a submerged arc furnace in the copper-making industry

A cost driver in the copper-making industry is the periodical relining of the furnaces because of wear. This paper presents thermochemical calculations (using the FactSage^™ database) focused on the evaluation of the slag-refractory chemical interaction in a submerged arc furnace (SAF) used for slag-cleaning operations. This evaluation was made under different conditions: slag-refractory volume ratio, oxygen partial pressure, and different types of slag. The new phases formed as a consequence of the slag-refractory chemical interaction were identified and quantified. To support the theoretical calculations based on thermochemistry, a postmortem study was carried out on a SAF used at the Atlantic Copper Smelter (Spain) after a 6-year campaign (4.5 mill. t. slag processed). Refractory samples were taken from different locations on the wall and analyzed using a scanning electron microscope equipped with an Energy Dispersive Spectroscopy system.     

Three-phase four-wire shunt active power filter based on the SOGI filter and Lyapunov function for DC bus control

The three-phase four-wire shunt active power filter (SAPF) was developed to suppress the harmonic currents generated by nonlinear loads, and for the compensation of unbalanced nonlinear load currents, reactive power, and the harmonic neutral current. In this work, we consider instantaneous reactive power theory (PQ theory) for reference current identification based on the following two algorithms: the classic low-pass filter (LPF) and the second-order generalized integrator (SOGI) filter. Furthermore, since an important process in SAPF control is the regulation of the DC bus voltage at the capacitor, a new controller based on the Lyapunov function is also proposed. A complete simulation of the resultant active filtering system confirms its validity, which uses the SOGI filter to extract the reference currents from the distorted line currents, compared with the traditional PQ theory based on LPF. In addition, the simulation performed also demonstrates the superiority of the proposed approach, for DC bus voltage control based on the Lyapunov function, compared with the traditional proportional-integral (PI) controller. Both novel approaches contribute towards an improvement in the overall performance of the system, which consists of a small rise and settling time, a very low or nonexistent overshoot, and the minimization of the total harmonic distortion (THD).     

Flame extension and the near field under the ceiling for travelling fires inside large compartments

Structures need to be designed to maintain their stability in the event of a fire. The travelling fire methodology (TFM) defines the thermal boundary condition for structural design of large compartments of fires that do not flashover, considering near field and far field regions. TFM assumes a near field temperature of 1200°C, where the flame is impinging on the ceiling without any extension and gives the temperature of the hot gases in the far field from Alpert correlations. This paper revisits the near field assumptions of the TFM and, for the first time, includes horizontal flame extension under the ceiling, which affects the heating exposure of the structural members thus their load-bearing capacity. It also formulates the thermal boundary condition in terms of heat flux rather than in terms of temperature as it is used in TFM, which allows for a more formal treatment of heat transfer. The Hasemi, Wakamatsu, and Lattimer models of heat flux from flame are investigated for the near field. The methodology is applied to an open-plan generic office compartment with a floor area of 960 m² and 3.60 m high with concrete and with protected and unprotected steel structural members. The near field length with flame extension (fTFM) is found to be between 1.5 and 6.5 times longer than without flame extension. The duration of the exposure to peak heat flux depends on the flame length, which is 53 min for fTFM compared with 17 min for TFM, in the case of a slow 5% floor area fire. The peak heat flux is from 112 to 236 kW/m² for the majority of fire sizes using the Wakamatsu model and from 80 to 120 kW/m² for the Hasemi and Lattimer models, compared with 215 to 228 kW/m² for TFM. The results show that for all cases, TFM results in higher structural temperatures compared with different fTFM models (600°C for concrete rebar and 800°C for protected steel beam), except for the Wakamatsu model that for small fires, leads to approximately 20% higher temperatures than TFM. These findings mitigate the uncertainty around the TFM near field model and confirm that it is conservative for calculation of the thermal load on structures. This study contributes to the creation of design tools for better structural fire engineering.     

Inferring kinetic dissolution of NaCl in aqueous glycol solution using a low-cost apparatus and population balance model

An experimental methodology for inferring brine dissolution rate in monoethylene glycol (MEG) solutions at different temperatures using a webcam combined with a mathematical model is presented. The measurement system is designed to track the RGB (red, green, and blue) colour variations during the dissolution process. A dynamic model augmented with the population balance equation is applied to describe the dissolution process. Moreover, the dissolution rate is consistently related to the temperature and MEG concentration through the driving force based on the Gibbs energy and chemical affinity. The applied low-cost measurement apparatus proved to be a useful resource for tracking the dissolution dynamics in a wide range of undersaturation.     

Correction to: EKLT: Asynchronous Photometric Feature Tracking Using Events and Frames

International Journal of Computer Vision - The original version of this article was unfortunately omitted to publish the footnote “The best result per row is highlighted in bold” in...     

Detailed modeling of the video signal and optimal readout of charge-coupled devices

This article provides a practical design methodology to calculate an optimal filter for noise reduction in the readout of charge-coupled devices (CCDs) taking into account the charge transfer and feedthroughs due to capacitive coupling in the CCD. A detailed analysis of the dynamics of the video signal and charge transfer is presented, including the circuital modeling of the output stage of the CCD and the dynamics of the electronics in the video chain before the analog-to-digital (AD) converter. This model is used to compute an optimal filter that minimizes the variance of the pixel noise and uses the samples of the charge transfer, before the charge is fully settled. This is necessary to enhance the performance of previous results that also use optimal filters but do not use the transition samples, while also reducing the pixel readout time, resulting in faster readouts. As a proof of concept for the optimal filter, we present novel experimental results using a Skipper CCD, which has a floating sense node that allows to measure the charge packet an arbitrary number of times. However, this technique can be applied to any CCD that has a readout system that digitally samples the video signal.     

TEOS as an improved alternative for chitosan beads cross‐linking: A comparative adsorption study

In this work the use of tetraethoxysilane (TEOS) for cross‐linking of chitosan hydrogel beads was studied at the level of 1 mmol TEOS per gram of chitosan. They were compared with glutaraldehyde and epichlorohydrin cross‐linked beads. The hydrogels were characterized by FTIR, SEM, water content, nitrogen content, and their point of zero charge. The performance of the anionic dye Remazol Black (RB) and the cationic Cd(II) adsorptions was assessed in order to characterize the sorbate–sorbent interaction. Adsorption experimental data were analyzed using two‐ and three‐parameter isotherm models along with the evaluation of mean adsorption energy and standard free energy. The adsorption was observed to be pH dependent. The uptake rate of RB and Cd(II) showed that the three type of beads followed a similar kinetic behavior. For both sorbates the TEOS cross‐linked beads showed the higher maximum adsorption capacity, followed by epichlorohydrin and glutaraldehyde cross‐linked beads. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41005.