Dependence of urban air pollutants on meteorology

Dependence of air pollutants on meteorology is presented with the aim of understanding the governing processes pollutants phase interaction. Intensive measurements of particulate matter (PM10) and gaseous materials (e.g., CO, NO2, SO2, and O3) are carried out regularly in 2002 at 14 measurement sites distributed over the whole territory of Great Cairo by the Egyptian Environmental Affairs Agency to assess the characteristics of air pollutants. The discussions in this work are based upon measurements performed at Abbassiya site as a case study. The nature of the contributing sources has been investigated and some attempts have been made to indicate the role played by neighboring regions in determining the air quality at the site mentioned. The results hint that, wind direction was found to have an influence not only on pollutant concentrations but also on the correlation between pollutants. As expected, the pollutants associated with traffic were at highest ambient concentration levels when wind speed was low. At higher wind speeds, dust and sand from the surrounding desert was entrained by the wind, thus contributing to ambient particulate matter levels. We also found that, the highest average concentration for NO2 and O3 occurred at humidity相似文献   

Instant Cyclohexene Epoxidation Over Ni-TUD-1 Under Ambient Conditions

Catalysis Letters - To avoid the aggregation problem and activity loss of nickel oxide (NiO) nanoparticles (NPs) in organic reactions, NiO NPs were incorporated into TUD-1 mesoporous material....     

Short communication: Validation of somatic cell score–associated loci identified in a genome-wide association study in German Holstein cattle

Recently, we identified 6 genomic loci affecting daughter yield deviations (DYD) for somatic cell score (SCS) in a genome-wide association study (GWAS) performed with German Holstein bulls. In the current study, we tested if these loci were associated with SCS in cows using their own performance data. The study was performed with 1,412 German Holstein cows, of which 483 were daughters of 71 bulls that had been used in the GWAS. We tested 10 single nucleotide polymorphisms (SNP) representing 6 genomic regions that were associated with DYD for SCS in bulls. All tested SNP were significant in cows. Seven of them, located on Bos taurus autosomes (BTA) 6, 13, and 19, had the same direction of effect as those previously reported in the bull population. The most significant associations were detected on BTA6 and BTA19, accounting for 1.8% of the total genetic variance. The major allele of the 2 SNP on BTA6 and the minor allele of the 2 SNP on BTA19 were favorable for lower SCS. The differences between the homozygous genotype classes were up to 15,000 cells/mL. The verification of SNP associated with SCS in this study provides further evidence for the functional role of the linked genomic regions for immune response and contributes to identification of causative mutations. In particular, SNP with minor frequency of the favorable allele possess high potential to reduce SCS in German Holstein cattle by selection.     

Deflection Prediction of Steel and FRP-Reinforced Concrete-Filled FRP Tube Beams

This paper presents the results of experimental and theoretical investigations that study the flexural behavior of reinforced concrete-filled fiber-reinforced polymer (FRP) tubes (RCFFTs) beams. The experimental program consists of 10 circular beams [6 RCFFT and 4 control reinforced concrete (RC) beams] with a total length of 2,000?mm, tested under four-point bending load. The experimental results were used to review and verify the applicability of various North American code provisions and some available equations in the literature to predict deflection of RCFFT beams. The measured deflections and the experimental values of the effective moment of inertia were analyzed and compared with those predicted using available models. The results of the analysis indicated that the behavior of steel and FRP-RCFFT beams under the flexural load was significantly different than that of steel and FRP-RC members. This is attributed to the confining effect of the FRP tubes and their axial contribution. This confining behavior in turn enhanced the overall flexural behavior and improved the tension stiffening of RCFFT beams. For that, the predicted tension stiffening of steel and FRP-RCFFT beams using the conventional equations (steel or FRP-RC member) underestimates the flexural response; therefore, the predicted deflections are overestimated. Based on the analysis of the test results, the Branson’s equation for the effective moment of inertia of RC structures is modified, and new equations are developed to accurately predict the deflection of concrete-filled FRP tube (CFFT) beams reinforced with steel or FRP bars.     

Generalized Thermoelastic Infinite Layer Subjected to Ramp-Type Thermal and Mechanical Loading under Three Theories—State Space Approach

A problem of thermoelastic interactions in an elastic infinite layer 0 ≤ x ≤ h with an elevated temperature field arising from ramp-type heating and loading has been constructed. The governing equations are written in a unified system from which the field equations for coupled thermoelasticity as well as for generalized thermoelasticity can be easily obtained as particular cases. Due attention has been paid to the finite rise times of temperature and stress. The problem has been solved analytically by using a state-space approach. Solutions from the derived analytical expressions have been computed for a specific situation. The solution for the half-space when (h → ∞) has been found also. Numerical results for the temperature distribution and thermal stress are represented graphically. A comparison was made among the results predicted by the theories.     

GIS and Multi-Criteria Evaluation: Robust Tools for Integrated Water Resources Management

Abstract

Integrated water resources planning and management are considered very complex issues. These issues are usually addressed through the multi-sectoral, interdisciplinary and hierarchal decomposition approaches. In general, integrated resource management indicates the consideration of water, social, socio-economic, economic and environmental issues. The current study aims at merging the GIS and Multi-Criteria Evaluation (MCE) techniques for the integrated water resource management of a cropped area. An area of about 120,000 Hectares located in the Northern Nile River Delta area with a coastal zone on the Mediterranean was selected and GIS was applied to represent the area's different environment, social, economic, and water factors. Different randomization cropping pattern distribution scenarios were proposed. Through the merging of GIS and MCE approaches, three scenarios were run and evaluated at three different levels: farm, canal catchment area and whole area. This merging resulted in a very powerful tool for the evaluation of different plans. The merging of GIS and MCE really facilitated the decision making process for these types of integrated water management problems.     

Effect of chloride ions on the corrosion behaviour of steel in 0.1 M citrate

The corrosion behaviour of steel was studied in aerated near neutral citrate solutions without and with various concentrations of NaCl. The potentiodynamic anodic polarization curve in 0.1 M citrate solution exhibits four anodic peaks A1, A2, A3 and A4 prior to the oxygen evolution reaction. Addition of Cl⁻ ions to the solution enhances the four peaks currents, specially A3, which is followed by pitting corrosion. The negative going scans of the cyclic voltammograms show two anodic reactivation peaks A5 and A6 and one cathodic plateau P1. A diffusion controlled process in the potential range of A1, A2 and P1 was detected by RDE experiments. The potentiostatic current time transients, at different concentrations of NaCl and applied potentials E_a > A3, were studied. The pit nucleation rate (t_i⁻¹) is found to increase with increasing the concentration of NaCl and the applied anodic potential. The impedance spectra exhibit four different behaviours depending on the potential range used. They were fitted with a single time constant circuit at E_a < −700 mV. However, at −700 mV < E_a < −480 mV, they were fitted with a circuit with two time constants. At E_a > −480 mV, the second semicircle is replaced by negative polarization resistance which is disappeared at E_a > −300 mV. The electrode impedance was found to decrease with the applied potential.