Dynamic time warping in classification and selection of motion capture data

Multidimensional Systems and Signal Processing - The paper is a comprehensive study on classification of motion capture data on the basis of dynamic time warping (DTW) transform. It presents both...     

Effect of the sintering temperature on microstructure and properties of Al2O3–Cu–Ni hybrid composites obtained by PPS

In the present research, the influence of sintering temperature on the microstructure and properties of Al₂O₃–Cu–Ni hybrid composites prepared by the Pulse Plasma Sintering (PPS) technique were described. In this research, three temperatures have been selected: 1250°C, 1300°C, and 1350°C. SEM observations were carried out to determine the distribution of the metallic phase in the composite depending on the sintering temperature. The conducted experiments and microscopic observations enabled a better understanding of the phenomena occurring between the ceramic matrix and metallic phase in the obtained materials. The mechanical properties like a hardness and fracture toughness were measured. The technology applied allowed us to obtain ceramic-metal composites with a homogeneous microstructure. It was found that the sintering temperature influences the selected physical and mechanical properties of the composites produced. It was found that samples produced at 1300°C are characterized by the highest relative density and the mechanical properties.     

Determination of Acoustical Parameters of Aqueous Solution of Kolliphors Binary Mixtures Using Density,Speed of Sound,Viscosity, and Surface Tension Measurements

Measurements of density, speed of sound, and surface tension as well as viscosity of aqueous Kolliphor® ELP (ELP) and Kolliphor® RH 40 (RH40) solutions as well as binary mixtures at different surfactant mole fractions were made at 293 K to investigate their aggregation behavior. The free volume, internal pressure, and molar cohesive energy were calculated and compared to the specific acoustic impedance and intermolecular free length to obtain qualitative information about the character of interactions between the surfactant molecules in the mixture through the water phase.     

Metallocenyl 7-ACA Conjugates: Antibacterial Activity Studies and Atomic-Resolution X-ray Crystal Structure with CTX-M β-Lactamase

The conjugation of organometallic groups to current β-lactam antibiotics is a field of increasing study due to the ability of certain organometallic groups to enhance the antibiotic potency of these drugs. Herein, we report the antibacterial properties of two metallocenyl (ferrocenyl and ruthenocenyl) 7-aminocephalosporanic acid (7-ACA) antibiotic conjugates. Continuing a trend we found in our previous studies, the ruthenocenyl conjugate showed greater antibacterial activity than its ferrocenyl counterpart. Compared with the previously published 7-aminodesacetoxycephalosporanic acid (7-ADCA) conjugates, the 3-acetyloxymethyl group significantly improved the compounds’ activity. Furthermore, the Rc-7-ACA compound was more active against clinical Staphylococcus aureus isolates than the ampicillin reference. Noticeably, neither of the two new compounds showed an undesirable toxic effect in HeLa and L929 cells at the concentrations at which they displayed strong antibacterial effects. The antibacterial activity of the two metallocenyl 7-ACA derivatives was further confirmed by scanning electron microscopy (SEM). SEM micrographs showed that bacteria treated with metallocenyl 7-ACA derivatives feature cell wall damage and morphology changes. Using a CTX-M-14 β-lactamase competition assay based on nitrocefin hydrolysis, we showed that the Rc-7-ACA bound more favorably to CTX-M-14 than its ferrocenyl counterpart, again confirming the superiority of the ruthenocenyl moiety over the ferrocenyl one in interacting with proteins. We also report a 1.47 Å resolution crystal structure of Rc-7-ACA in complex with the CTX-M-14 E166A mutant, an enzyme sharing a similar active site configuration with penicillin-binding proteins, the molecular target of β-lactam antibiotics. These results strengthen the case for the antibacterial utility of the Rc and Fc groups.     

Model based prognosis of contaminant leaching for reuse of demolition waste in construction projects

In this study, groundwater contamination from recycled demolitian waste in road constructions is assessed using predictions of leachate concentrations. Numerical transport simulations are performed for three scenarios (a parking lot, a noise protection barrier, and road), and using a number of characteristic subsoils of Germany, to estimate the breakthrough of different contaminant classes at the groundwater table. Conservative tracer breakthrough times (BTT) primarily depend on subsoil hydraulic properties, for organic pollutants KOC and subsoil OC are the controlling parameters. Significant concentration reductions from dispersion only occur when source concentrations decrease prior to contaminant breakthrough. If source concentrations remain high for long periods relative to peak BTT, concentration breakthrough is undamped. Accounting for biodegradation reduces breakthrough concentrations significantly. For the “noise protection barrier” and “road” scenarios, capillary barrier effects cause the seepage water to partially bypass the recycling material. Accounting for this bypass flow and spatial averaging across the constructions reduces concentrations by about 30–40?%.     

Multicriteria optimization as enabler for Sustainable Ceramic Matrix Composites

Over the past 40 years, development of Ceramic Matrix Composites (CMCs) has focused mainly on the improvement of material performance and optimization of cost-efficient production routes. Recently, more fields of application have opened up for CMCs, in which environmental impacts are relevant. These impacts have barely been investigated so far but receive growing interest due to increasing awareness of the environmental consequences. Our innovative approach frames material properties in relation to environmental impacts (e.g., global warming potential in CO₂ emission) by varying process parameters to balance optimum performance against environmental considerations. First, the process of wet filament winding has been investigated up to the Carbon Fiber Reinforced Plastic (CFRP) state by changing both the curing and tempering temperatures. During the production of CFRP plates, mass and energy flows were tracked in each step. Three point-bending and interlaminar shear tests have been performed on the resulting samples to identify basic mechanical properties. The environmental impacts are determined by a cradle-to-gate Life Cycle Assessment (LCA), using the software SimaPro. The resulting tradeoffs between mechanical properties and environmental impacts show nonlinear behavior, thus revealing optimum points above which improved mechanical properties are associated with significantly higher CO₂ emissions.     

Short‐Term Morphology Relaxation of Thermoplastic Polyurethane Elastomers after Fast Strain Steps

Strain steps are applied to elastomers in a pneumatic relaxometer and monitored by small‐angle X‐ray scattering (SAXS). The relaxometer provides a rise time of 13 ms for strain pulses of step height Δε = ±1 in strain. The basic character of the 2D SAXS frames is examined and corresponding invariants Q(t) are analyzed. Three thermoplastic polyurethanes (TPU) of hardness 85 Shore A with different soft segments are studied both unannealed and annealed. The first response of all materials is a fast morphology conversion which finishes within t_mc =250 ms. Because it has been untraceable, it is characterized by a settling stroke Q(t_mc) ? Q(0). The second response is a slow morphology adjustment process which complies with logarithmic relaxation. It is characterized by a relaxation rate D_Q = Q(10 t)/Q(t) ? 1. Comparison indicates that the nanoscopic morphology relaxation processes appear to have little direct relation to the macroscopic stress relaxation curves. The materials differ with respect to hard‐domain morphology stability and morphology recovery. Most unstable is the morphology of the annealed polyether‐based material. It forms nanofibrillary entities when strained.     

Radiation- and Photo-Induced Oxidation Pathways of Methionine in Model Peptide Backbone under Anoxic Conditions

Within the reactive oxygen species (ROS) generated by cellular metabolisms, hydroxyl radicals (HO^•) play an important role, being the most aggressive towards biomolecules. The reactions of HO^• with methionine residues (Met) in peptides and proteins have been intensively studied, but some fundamental aspects remain unsolved. In the present study we examined the biomimetic model made of Ac-Met-OMe, as the simplest model peptide backbone, and of HO^• generated by ionizing radiation in aqueous solutions under anoxic conditions. We performed the identification and quantification of transient species by pulse radiolysis and of final products by LC-MS and high-resolution MS/MS after γ-radiolysis. By parallel photochemical experiments, using 3-carboxybenzophenone (CB) triplet with the model peptide, we compared the outcomes in terms of short-lived intermediates and stable product identification. The result is a detailed mechanistic scheme of Met oxidation by HO^•, and by CB triplets allowed for assigning transient species to the pathways of products formation.