First nuclear transmutation of 237Np and 241Am by accelerator-driven system at Kyoto University Critical Assembly

This study demonstrates, for the first time, the principle of nuclear transmutation of minor actinide (MA) by the accelerator-driven system (ADS) through the injection of high-energy neutrons into the subcritical core at the Kyoto University Critical Assembly. The main objective of the experiments is to confirm fission reactions of neptunium-237 (²³⁷Np) and americium-241 (²⁴¹Am), and capture reactions of ²³⁷Np. Subcritical irradiation of ²³⁷Np and ²⁴¹Am foils is conducted in a hard spectrum core with the use of the back-to-back fission chamber that obtains simultaneously two signals from specially installed test (²³⁷Np or ²⁴¹Am) and reference (uranium-235) foils. The first nuclear transmutation of ²³⁷Np and ²⁴¹Am by ADS soundly implemented by combining the subcritical core and the 100 MeV proton accelerator, and the use of a lead-bismuth target, is conclusively demonstrated through the experimental results of fission and capture reaction events.     

A Two‐Stage Stochastic Mixed‐Integer Programming Approach to the Smart House Scheduling Problem

A “smart house” is a highly energy‐optimized house equipped with photovoltaic (PV) systems, electric battery systems, fuel cell (FC) cogeneration systems, electric vehicles (EVs), and so on. Smart houses are attracting much attention recently because of their enhanced ability to save energy by making full use of renewable energy and by achieving power grid stability despite an increased power draw for installed PV systems. Yet running a smart house's power system, with its multiple power sources and power storages, is no simple task. In this paper, we consider the problem of power scheduling for a smart house with a PV system, an FC cogeneration system, and an EV. We formulate the problem as a mixed‐integer programming problem, and then extend it to a stochastic programming problem involving recourse costs to cope with uncertain electricity demand, heat demand, and PV power generation. Using our method, we seek to achieve the optimal power schedule running at the minimum expected operation cost. We present some results of numerical experiments with data on real‐life demands and PV power generation to show the effectiveness of our method. © 2013 Wiley Periodicals, Inc. Electr Eng Jpn, 186(4): 48–58, 2014; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.22336     

Simultaneous Quantification of Secoisolariciresinol Diglucoside and Cyanogenic Glycosides in Flaxseed Products by Various Processing Methods

Two cyanogenic glycosides (linustatin and neolinustatin) and sucrose were isolated from defatted flaxseed, and their structures were determined by NMR spectral analysis and comparison with existing data. Using secoisolariciresinol diglucoside (SDG) and the cyanogenic glycosides as standards, we developed a method to quantify the three compounds simultaneously by ultrahigh-performance liquid chromatography (UHPLC)-MS in selected reaction monitoring (SRM) mode. Using this tool, flaxseed powder—processed by various methods—was analyzed with regard to the contents of the beneficial compound, SDG, and the toxic compounds, cyanogenic glycosides. The levels of SDG in samples treated with alkaline solution are much higher than in samples without treatment, and in general, the levels of linustatin and neolinustatin in flaxseed powder decreased progressively as heating time is prolonged after treatment with alkaline solutions.     

Visualization of oscillating flow in a double-inlet pulse tube refrigerator with a diaphragm inserted in a bypass-tube

The double-inlet pulse tube refrigerator that has a diaphragm inserted in a bypass-tube, which enabled it to transmit a pressure oscillation whereas to obstruct a DC gas flow, was manufactured and tested. The oscillating flow behavior inside of the refrigerator was studied by using a smoke-wire flow visualization technique. It was found that if the diaphragm was optimized, the performance would be improved more than that of the refrigerator with a bypass valve due to the increase in the P–V work of the gas and the decrease in the convective heat loss caused by a secondary flow.     

Anthocyanins,but not Anthocyanidins,from Bilberry (Vaccinium myrtillus L.) Alleviate Pruritus via Inhibition of Mast Cell Degranulation

Abstract: We have previously reported that bilberry anthocyanins exhibit an anti‐pruritic effect in a mouse model of allergic contact dermatitis. It has been reported that anthocyanins are particularly sensitive to thermal treatment and are easily hydrolyzed to anthocyanidins when exposed to high temperatures. The objective of this study was to compare the anti‐pruritic effect of anthocyanin‐rich quality‐controlled bilberry extract and anthocyanidin‐rich degraded extract using a mouse model of allergic contact dermatitis. BALB/c mice with allergic contact dermatitis induced by 4 weeks of repeated application of 2,4,6‐trinitro‐1‐chlorobenzene (TNCB) were administered Bilberon‐25 orally for 4 weeks after sensitization with TNCB. The effect of Bilberon‐25 on pruritus was evaluated by measurement of scratching behavior. RBL‐2H3 mast cells were used to investigate the effect of Bilberon‐25 on degranulation in 48/80‐stimulated mast cells. Compared with nonheated Bilberon‐25, the proportion of anthocyanins in heated Bilberon‐25 decreased, and the proportion of anthocyanidins was increased in heated‐time dependent manner. Treatment with non‐heated Bilberon‐25 significantly attenuated the TNCB‐induced increase in scratching behavior, whereas treatment with 2 h‐heated Bilberon‐25 did not. Moreover, 300 μg/mL nonheated Bilberon‐25 showed significant inhibition of degranulation in RBL‐2H3 mast cells, whereas 2 h‐heated Bilberon‐25 had no effect at any concentration studied. It is assumed that the inhibitory effect of bilberry anthocyanins on pruritus might be mediated, at least in part, by its inhibitory effect on mast cell degranulation. In conclusion, the anthocyanin‐rich but not anthocyanidin‐rich bilberry extract may be a useful dietary supplement for skin diseases involving pruritic symptoms, such as chronic allergic contact dermatitis, atopic dermatitis, and rhinitis.     

Irradiation-Assisted Stress-Corrosion Cracking of Nitinol During eBeam Sterilization

Medical device fractures during gamma and electron beam (eBeam) sterilization have been reported. Two common factors in these device fractures were a constraining force and the presence of fluorinated ethylene propylene (FEP). This study investigated the effects of eBeam sterilization on constrained light-oxide nitinol wires in FEP. The goal was to recreate these fractures and determine their root cause. Superelastic nitinol wires were placed inside FEP tubes and constrained with nominal outer fiber strains of 10, 15, and 20%. These samples were then subjected to a range of eBeam sterilization doses up to 400 kGy and compared with unconstrained wires also subjected to sterilization. Fractures were observed at doses of >100 kGy. Analysis of the fracture surfaces indicated that the samples failed due to irradiation-assisted stress-corrosion cracking (IASCC). This same effect was also observed to occur with PTFE at 400 kGy. These results suggest that nitinol is susceptible to IASCC when in the presence of a constraining stress, fluorinated polymers, and irradiation.     

河道疏浚淤泥固化处理设备、流程及应用

河道疏浚中产生的淤泥如采取抛弃处理会造成资源浪费。介绍一种淤泥固化系统,可对城市污泥、淤泥、隧洞和建筑工程等产生的污泥在工地现场进行瞬间造粒后固化。以图示方式简单描述了淤泥投入、固化出料及养护的处理流程。根据强度试验结果,经系统固化后改良土的强度达到第3类工程用土。总结了淤泥固化系统具有体积小、高机动性、无副产物和处理数据自动记录等特点。介绍了该系统在日本应用的工程实例。最后指出,污泥固化处理成本取决于污泥特性、产物用途及环境指标等因素。     

Selection of soldering temperature for ultrasonic-assisted soldering of 5056 aluminum alloy using Zn-Al system solders

The conditions for sound butt-joints of 5056 aluminum alloy containing 4.6 mass% Mg using Zn-xAl (x = 5, 13, and 38 mass%) solder at the relevant temperatures were investigated. Each solder foil was inserted between faying surfaces of 5056 aluminum rods. Ultrasonic vibration at a frequency of 19 kHz was applied to the faying surfaces through an aluminum substrate at soldering temperatures for 4 s in air. The strength of obtained solder joints was measured by tensile tests. The microstructure in the solder layer after the soldering process was evaluated with an SEM-EDX. The results of tensile tests revealed that joints soldered under the liquidus temperature of Zn-Al solders showed higher strength than joints soldered over the liquidus temperature. In the joints soldered over the solder liquidus temperature, the joint strength decreased with an increase in soldering temperature. It was caused by the formation of MgZn₂ in the solder layer due to dissolution of 5056-Al into the solder liquid during the soldering process. On the other hand, ultrasonic-assisted soldering under the solder liquidus temperature suppressed dissolution of 5056-Al and improved the joint strength by reducing the formation of MgZn₂.