A smartphone attachment for remote ophthalmic slit lamp examinations

Microsystem Technologies - A low-cost, self-imaging smartphone attachment has been developed for remote slit lamp examination of the human eye. The device is designed with off-the-shelf optical...     

Synthesis and properties of castor oil-based polyurethane containing short fluorinated segment

This study successfully incorporated a short-segment fluorine-containing chain extender (2,2,3,3-tetrafluoro-1,4-butanediol [TF]) into castor oil-based polyurethane (COPU) to synthesize TF/COPUs. The interactions between TF and COPU components were identified by Fourier transform infrared and X-ray photoelectron spectroscopies, the results revealed that the increase in the TF content increased the van der Waals forces in C F…CO and the hydrogen bonding force in C F…H N. Atomic force microscopy indicated that the addition of more TF contributed to a higher level of microphase separation in the TF/COPUs. Thermogravimetric analysis showed that the TF component can enhance the thermal resistance of TF/COPUs. Differential scanning calorimetry and dynamic mechanical analysis indicated that the glass transition temperature (T_g) of TF/COPUs increased with the TF content. The stress–strain testing showed that the tensile strength and elongation at break values decreased with the TF content. This tensile behavior may be due to the molecular weight of a TF/COPU decreased with the TF content as evidenced by the gel permeation chromatography results. The hydrolytic degradation tests of dipping TF/COPUs in 3 wt% NaOH solution indicated that TF could lower the surface free energy and enhance the degradation stability of TF/COPUs.     

A web‐based performance assessment system for environmental protection: WePass

In response to the increasing public concern over the effects of construction waste on the environment, a performance assessment system has been designed to provide an instant, online assessment of how well a construction site performs environmentally, e.g. measuring the level of pollution generated from a construction site. Through the use of both Internet and database technologies, it is possible to collect and present data that are essential for environmental management online. To achieve this, a set of environmental performance parameters was derived through a postal questionnaire survey and interviews with experts in the field. A conceptual framework was developed, of which the key components were: template, knowledge base, output data and benchmark group. In combination, these factors provide a system that enables speedy assessment and effective management of environmental performance on construction sites, hence prompt decisions can be made and corrective actions can be taken before potential hazards turn into real disasters.     

The effects of silver nitrate on the structure and properties of polyurethanes containing pyridyl units

In this study, 2,6-pyridinedimethanol was used as a chain extender to synthesize a new polyurethane, PDM-PU. Further, various amounts of silver nitrate were incorporated to produce PDM-PU/AgNO₃ complexes. FT-IR and UV–Vis analyses confirm the formation of complex in the PDM-PU/AgNO₃. DSC and DMA results show that the glass transition temperature (T _g), dynamic T _g and storage modulus at 25 °C of the PDM-PU/AgNO₃ complexes increase with increasing AgNO₃ content. This is due to the formation of complex structure that can restrict the segmental motion of polymer chains. The TGA and stress–strain test results show that the thermal decomposition temperature, tensile strength and elongation at break increase with the AgNO₃ content initially. Then, they decrease inversely. This indicates that the formation of complex structure raises these properties when the AgNO₃ content is below certain value. But as more coordinate bonds were formed, the specimens become brittle. In addition, the crosslink effect caused by coordinate bonds inhibits the dissolution of polymer chains and thereby reduces the swelling degree of the complexes in solvent. Furthermore, AgNO₃ imparts antibacterial activity against S. aureus and K. pneumoniae to the complexes     

Transient changes in milk production efficiency and bacterial community composition resulting from near-total exchange of ruminal contents between high- and low-efficiency Holstein cows

The objectives of this study were to determine if milk production efficiency (MPE) is altered by near-total exchange of ruminal contents between high- (HE) and low-MPE (LE) cows and to characterize ruminal bacterial community composition (BCC) before exchange and over time postexchange. Three pairs of ruminally cannulated, third-lactation cows were selected whose MPE (energy-corrected milk per unit of dry matter intake) differed over their first 2 lactations. Approximately 95% of ruminal contents were exchanged between cows within each pair. Ruminal pH and volatile fatty acid (VFA) profiles, along with BCC (characterized by sequencing of the variable 4 region of 16S rRNA genes), were assessed just before feeding on d ?8, ?7, ?5, ?4, ?1, 1, 2, 3, 7, 10, 14, 21, 28, 35, 42, and 56, relative to the exchange date. High-MPE cows had higher total ruminal VFA concentrations, higher molar percentages of propionate and valerate, and lower molar percentages of acetate and butyrate than did LE cows, and re-established these differences 1 d after contents exchange. Across all LE cows, MPE increased during 7 d postexchange but declined thereafter. Two of the 3 HE cows displayed decreases in MPE following introduction of the ruminal contents from the corresponding LE cow, but MPE increased in the third HE cow, which was determined to be an outlier. For all 6 cows, both liquid- and solids-associated BCC differed between individuals within a pair before contents exchange. Upon exchange, BCC of both phases in all 3 pairs was more similar to that of the donor inoculum than to preexchange host BCC. For 5 of 6 cows, the solids-associated community returned within 10 d to more resemble the preexchange community of that host than that of the donor community. Individual variability before the exchange was greater in liquids than in solids, as was the variability in response of bacterial communities to the exchange. Individual cows varied in their response, but generally moved toward re-establishment of their preexchange communities by 10 d after contents exchange. By contrast, ruminal pH and VFA profiles returned to preexchange levels within 1 d. Despite the small number of cows studied, the data suggest an apparent role for the ruminal bacterial community as a determinant of MPE.     

Challenges for Use of PeroxySafe™ MSA Kit for Analysis of Poultry Meat

The rapid SafTest PeroxySafe^? MSA Kit (PeroxySafe method) was approved by the AOAC to determine peroxide values (PVs) in foods. Studies were conducted to remedy challenges (reaction time, lack of turbidity in samples, effect of prooxidant [NaCl]) for use of the method when analyzing PVs in turkey meat. Initially, PVs could not be consistently obtained after a reaction time of 10 min (per directions) for variously processed meat. However, trends indicated that heated and heated/stored samples generally had higher numerical values than Fresh ones. This trend agreed with that of other investigators, suggesting usefulness of the method if consistent data could be obtained. Data for PVs of all treatments within processing conditions were recorded at 10, 20, and 30 min. There was a highly significant (P ≤ 0.0001) effect for reaction time with 30 min > 20 min > 10 min. An increase in PVs was noted for heated samples when lipids and oxidation products were released by homogenization, rather than vortexing with glass beads, and data were recorded at the 30 min. It is likely that these precautions may promote more accurate determination of PVs from samples with NaCl, a prooxidant. Comparison of extraction procedures for the PeroxySafe method and that of Grau and others (2000) showed that the extraction procedure (homogenization) of the latter method produced numerically greater PVs for fresh/stored samples than that of the former. However, it was concluded that the PeroxySafe method could be used for comparative analyses of samples when adequate extraction (turbidity) occurred and measurements were recorded after a 20 to 30 min reaction time.     

Estimating the Ungauged Natural Flow Regimes for Environmental Flow Management

Regime-based approach recently becomes an important strategy while considering aquatic ecosystems in environmental flow management. The key element for supporting this strategy is long streamflow data which is usually not available for determining natural flow regimes. This study uses a back-propagation network to estimate ungauged natural flow regimes. A set of the upper reaches of Taiwan’s 42 flow stations with non-human control streamflow and at least 20 years daily flow data is used to quantify the natural flow regimes using 31 Indicators of Hydrologic Alteration (IHA). Watershed geomorphologic characteristic factors and rainfall parameters are used to classify homogeneous flow regime areas. The results show that there are three types of flow regimes from the flow stations, and each group of indicators in the IHA has different correlations with different geomorphologic characteristic factors and rainfall parameters. The results of using an artificial neural network model to estimate IHA show that the group average percent error fell from 21 % to 8 % and the average correlation coefficient was over 0.7, indicating that the model presented in this study is able to accurately estimate the natural flow regime in ungauged stations. Instead of predicting daily streamflow, this study estimates indicator values for ease of ecological water resources management.     

New splitting algorithms for geometric transformations of digital images and their error analysis

For digital images and patterns under the nonlinear geometric transformation, T: (ξ, η) → (x, y), this study develops the splitting algorithms (i.e., the pixel‐division algorithms) that divide a 2D pixel into N × N subpixels, where N is a positive integer chosen as N = 2 ^k(k ≥ 0) in practical computations. When the true intensity values of pixels are known, this method makes it easy to compute the true intensity errors. As true intensity values are often unknown, the proposed approaches can compute the sequential intensity errors based on the differences between the two approximate intensity values at N and N/2. This article proposes the new splitting–shooting method, new splitting integrating method, and their combination. These methods approximate results show that the true errors of pixel intensity are O(H), where H is the pixel size. Note that the algorithms in this article do not produce any sequential errors as N ≥ N₀, where N₀ (≥2) is an integer independent of N and H. This is a distinctive feature compared to our previous papers on this subject. The other distinct feature of this article is that the true error bound O(H) is well suited to images with all kinds of discontinuous intensity, including scattered pixels. © 2011 Wiley Periodicals, Inc. Int J Imaging Syst Technol, 21, 323–335, 2011     

A generic method of cleaning and enhancing handwritten data from business forms

The automation of business form processing is attracting intensive research interests due to its wide application and its reduction of the heavy workload due to manual processing. Preparing clean and clear images for the recognition engines is often taken for granted as a trivial task that requires little attention. In reality, handwritten data usually touch or cross the preprinted form frames and texts, creating tremendous problems for the recognition engines. In this paper, we contribute answers to two questions: “Why do we need cleaning and enhancement procedures in form processing systems?” and “How can we clean and enhance the hand-filled items with easy implementation and high processing speed?” Here, we propose a generic system including only cleaning and enhancing phases. In the cleaning phase, the system registers a template to the input form by aligning corresponding landmarks. A unified morphological scheme is proposed to remove the form frames and restore the broken handwriting from gray or binary images. When the handwriting is found touching or crossing preprinted texts, morphological operations based on statistical features are used to clean it. In applications where a black-and-white scanning mode is adopted, handwriting may contain broken or hollow strokes due to improper thresholding parameters. Therefore, we have designed a module to enhance the image quality based on morphological operations. Subjective and objective evaluations have been studied to show the effectiveness of the proposed procedures. Received January 19, 2000 / Revised March 20, 2001     

Evaluation of incremental learning algorithms for HMM in the recognition of alphanumeric characters

We present an evaluation of incremental learning algorithms for the estimation of hidden Markov model (HMM) parameters. The main goal is to investigate incremental learning algorithms that can provide as good performances as traditional batch learning techniques, but incorporating the advantages of incremental learning for designing complex pattern recognition systems. Experiments on handwritten characters have shown that a proposed variant of the ensemble training algorithm, employing ensembles of HMMs, can lead to very promising performances. Furthermore, the use of a validation dataset demonstrated that it is possible to reach better performances than the ones presented by batch learning.