Charge Transport Calculation along Two-Dimensional Metal/Semiconductor/Metal Systems

Two-dimensional transistors are promising candidates for the next generation of nanoscale devices. Like the other alternatives, they also encounter problems such as instability under standard condition (STP), low channel mobility, small band gaps, and difficulty to integrate metal contacts. The latter poses a great challenge since metal/semiconductor interface significantly affects the transistor‘s performance. Some of these obstacles can be solved by using two-dimensional transition metal di-chalcogenides (TMDC) materials. In this study, we performed charge transport calculation based on density functional theory (DFT) followed by wave dynamics to evaluate the performance of six two-dimensional TMDC metal/semiconductor/metal systems. Each semiconductor monolayer was laterally connected, at both ends to metal contacts consisting of VS₂ or FeS₂ monolayers. We found that charge transport was more efficient in systems containing a CrS₂ semiconductor monolayer compared to systems with MoS₂ or WS₂ as the semiconductor monolayer. The electronic characterization of the monolayer TMDC materials by DFT estimates well the trend in charge transport efficiency calculated using wave packet dynamics.     

Low-cost direct writing lithography system for the sub-micron range

Abstract

We have developed a fixed beam direct writing laser lithography system with a minimum feature size of 400nm at 457nm wavelength and a writing speed of 4·2mm/s with total system costs of less than 100 000 US$.     

The view from the top

The challenge of integrating large amounts of renewable energy resources into the electric sector requires updated transmission analysis techniques. Economic planning, primarily in the form of value-based planning over interconnectionwide areas, is needed before performing the traditional single-hour, capacity-based reliability analyses.     

Design considerations for a general-purpose microprocessor

The authors examine the performance, cost, and schedule tradeoffs made for the NS 32532, a 32-bit general-purpose microprocessor. Among its features are a 30-MHz clock frequency, three on-chip caches, a four-stage pipeline, and dedicated mechanisms for multiprocessing support. The authors describe the design constraints set by the VLSI processing and packaging technologies. They address the issue of market requirements by examining the software and hardware considerations for the microprocessor's target applications. After describing the functional partitioning choices, including the means for supporting a memory hierarchy and floating-point operations, they present the NS32532's microarchitecture. They then examine the microprocessor's system interface, the memory reference transactions, and the instruction-flow and data-flow monitoring mechanisms. Finally, the authors present an overview of the methodology adopted to accomplish the design within a strict schedule while achieving full functionality and meeting cost and performance goals     

Sonographic detection of focal changes in the liver hilus in patients receiving corticosteroid therapy

OBJECTIVE: While diffuse deposition of fat may occur with corticosteroid (CS) administration both in the liver and in other organs, comparatively little is known about focal changes in the liver under corticosteroid medication. Therefore, we evaluated pattern and extent of focal hepatic steatosis by ultrasound (US) in patients receiving corticosteroids. SUBJECTS AND METHODS: 93 patients with known inflammatory bowel disease (IBD) received corticosteroids during a period of at least six weeks prior to the ultrasound examination and 28 IBD-patients had no corticosteroids within the last three years. 13 additional patients received corticosteroids for other reasons than IBD for > 1 year. 80 healthy volunteers served as controls. Focal changes of the liver as assessed by high resolution ultrasound (Acuson 128, 3.5 and 5 MHz) were defined as areas of brighter echogenicity compared to the general aspect of the liver. The size of the hyperechoic areas was documented (photoprint). RESULTS: 40/93 IBD-patients with corticosteroids (43%) had definite areas of brighter echos in the hilus region of the liver. In IBD-patients without corticosteroids only one patient showed a focal brighter echogenicity, whereas in the non-IBD group with corticosteroids 8/13 had focal lesions (62%). In the control group only four healthy subjects showed brighter areas (5%). CONCLUSION: Bright focal areas in the liver hilus occur in > 40% of IBD-patients during corticosteroid medication. This phenomenon occurs in IBD-patients as frequently and as intense as in other patients with longstanding corticosteroid therapy. There is a hilar area of the liver with typical size and location which reacts to corticosteroid administration with hyperechoic reflexes at ultrasound investigation. This is important to know when it comes to the differential diagnosis of focal changes.     

Tilidine does not affect human sphincter of Oddi motility--a randomized, controlled study

AIM: To investigate the effects of intravenous pentazocine and tilidine on sphincter of Oddi motility. METHODS: Twenty patients with suspected sphincter of Oddi dysfunction were enrolled in a prospective, double-blind study. Sphincter of Oddi motility was assessed by means of endoscopic manometry after injection of 0.9% saline, as well as after randomized dosing with either 30 mg pentazocine i.v. (n = 10) or 50 mg tilidine i.v. (n = 10). RESULTS: Pentazocine significantly increased the sphincter of Oddi baseline pressure from 32 +/- 21 mmHg (saline) to 41 +/- 19 mmHg (P = 0.002), whereas tilidine did not alter the sphincter baseline pressure (34 +/- 15 mmHg saline vs. 36 +/- 16 mmHg tilidine, P = 0.16). Furthermore, pentazocine increased the phasic sphincter contraction amplitude (108 +/- 16 mmHg saline vs. 121 +/- 18 mmHg pentazocine, P = 0.004), but tilidine was without any effect (125 +/- 24 mmHg saline vs. 125 +/- 21 mmHg tilidine, P = 0.93). The phasic sphincter of Oddi contraction frequency and duration were not influenced either by pentazocine or by tilidine. CONCLUSION: In contrast to 30 mg of pentazocine, 50 mg of tilidine does not affect sphincter of Oddi motility. Therefore, tilidine can be used during endoscopic manometry and for analgesia in pancreatobiliary disease.     

Endoscopic injection of botulinum toxin for biliary sphincter of Oddi dysfunction

A 66-year old man was admitted to our hospital because of vomiting, diarrhea and progressive dyspnea. Acute respiratory distress syndrome (ARDS) due to bilateral pneumonia was diagnosed and he was also in septic shock. The patient had a history of partial hepatectomy for hepatoma, and suffered from liver cirrhosis. Emergency bronchoalveolar lavage (BAL) revealed abundant gram-positive cocci and polymorphonuclear leukocytes in the collected sample. Blood culture revealed corynebacterium. Treatment consisted of mechanical ventilation and administration of fluids, effective antibiotics, and high-dose methylprednisolone (MPS). MPS was administered from the onset of ARDS with a starting dose of 1,000 mg, which was gradually reduced to 60 mg over 8 days. Pulmonary infiltrates shown on the chest X-ray film were alleviated, and arterial blood gas data rapidly improved. The patient was successfully extubated on the 10th hospital day, and discharged on the 30th hospital day. Serial BAL and plasma levels of inflammatory cytokines decreased rapidly in parallel with the improvement of the patient's clinical condition. This is a case report of severe bacterial pneumonia that was successfully treated with effective antibiotics and high-dose MPS for several days from the onset of ARDS.     

“Dry latex.” A new method for the preparation of rubber-filler powders

A new method of preparing rubber powders, especially masterbatch powders, is described. It consists of the dispersion of polymer latices in highly hydrophobic fine particle-size powders such as special silicas and carbon black, followed by drying. During the whole procedure the powders never lose their pourable state. Several powder properties, e.g., particle size distribution, pourability, bulk density, and angle of repose, are dealt with for NR and SBR powders. These powders require a high shear processing stage to disperse the black and rubber chemicals into the rubber matrix. For direct extruder feeding, a highly efficient extruder mixing screw is necessary. It is shown that the powders can be sufficiently protected against aging by use of special antioxidants. The procedure is characterized by an outstanding simplicity in respect to engineering and equipment. The future outcome of the method will depend on the balance between that simplicity and the energy demand which can be tolerated.     

Glyphosate Adsorption from Water Using Hierarchically Porous Metal–Organic Frameworks

The selective removal of one ligand in mixed-ligand MOFs upon thermolysis provides a powerful strategy to introduce additional mesopores without affecting the overall MOF structure. By varying the initial ligand ratio, MOFs of the MIL-125-Ti family with two distinct hierarchical pore architectures are synthesized, resembling either large cavities or branching fractures. The performance of the resulting hierarchically porous MOFs is evaluated toward the adsorptive removal of glyphosate (N-(phosphonomethyl)glycine) from water, and the adsorption kinetics and mechanism are examined. Due to their strong affinity for phosphoric groups, the numerous Ti–OH groups resulting from the selective ligand removal act as natural anchor points for effective glyphosate uptake. The relationships between contact duration, glyphosate concentration, and adsorbent dosage are investigated, and the impact of these parameters on the effectiveness of glyphosate removal from contaminated water samples is examined. The introduction of additional mesopores has increased the adsorption capacities by nearly 3 times with record values exceeding 440.9 mg g⁻¹, which ranks these MOFs among the best-reported adsorbents.