Effect of Cryogenic Cooling on the Heat Transfer during Turning of AZ31C Magnesium Alloy

ABSTRACT

A combined analytical and experimental study was carried out to analyze the effects of cryogenic cooling on temperature during turning of AZ31C magnesium alloy. Finite element method was employed to model and simulating the cryogenic and dry turning. Results obtained from the model were found to be in good agreement with the experimental observations. For the maximum temperature at the turned surface, the difference in the experimental and predicted value observed during dry and cryogenic turning was only 4 and 8% respectively. A significant reduction in the maximum temperature on the chip surface (around 35%) and tool surface (around 29%) was observed during the cryogenic turning compared to dry turning. This reduction in temperature was an attribute of liquid nitrogen, which produces intense cooling effect around the vicinity cutting zone where heat generation takes place hence enhancing the heat transfer. The isothermal region belonging to the highest temperature on the tool surface was also reduced by about 42%. The reduction in temperature during cryogenic conditions were found to be beneficial for the machining of magnesium alloys under safe conditions, reducing the risk of ignition and explosions, and also increases the sustainability of the process.     

Systematics study through scanning electron microscopy; a tool for the authentication of herbal drug Mentha suaveolens Ehrh

In all over the world, herbal drugs are usually adulterated with similar species or varieties due to incorrect identification. Most of herbal products devoid purity and quality, therefore an attempt was carried out to identify plant species and authenticate its herbal drug products from Mentha suaveolens. Microscopy tools provide an excellent platform to identify plants at species level. In this study, microscopic and pharmacokinetic parameters of M. suaveolens were observed. Plant species were collected from high diverse areas of Northern Pakistan. Macro and micro‐morphology including palynology and anatomical features were analyzed to study M. suaveolens. Species characteristics were studied, while implementing microscopic techniques for the delimitation and identification of the species. Traditionally Mentha species are used to cure several diseases that is, digestive disorders, respiratory disorders. Micromorphology (stem, leaves, flowers structure, length etc.), palynology (shape, size of pollen etc.), and anatomical characters (types of stomata, epidermal cell shape, and trichomes) were studied. Micromorphology and anatomical characters were of great interest and significance to discuss the taxonomy of the species. Taxonomic characters were studied to characterize and authenticate the species. The aim of the present study is to observe in detail the taxonomic identification of the species in term of morphology, palynology, and foliar epidermal anatomy for the correct identification along with their medicinal uses in the area.     

Ultimate bearing capacity of strip footing resting on clay soil mixed with tire-derived aggregates

This study investigated the use of recycled tire-derived aggregate (TDA) mixed with kaolin as a method of increasing the ultimate bearing capacity ( UBC) of a strip footing. Thirteen 1g physical modeling tests were prepared in a rigid box of 0.6 m × 0.9 m in plan and 0.6 m in height. During sample preparation, 0%, 20%, 40%, or 60% (by weight) of powdery, shredded, small-sized granular (G 1–4 mm) or large-sized granular (G 5–8 mm) TDA was mixed with the kaolin. A strip footing was then placed on the stabilized kaolin and was caused to fail under stress-controlled conditions to determine the UBC. A rigorous 3D finite element analysis was developed in Optum G-3 to determine the UBC values based on the experimental test results. The experimental results showed that, except for the 20% powdery TDA, the TDA showed an increase in the UBC of the strip footing. When kaolin mixed with 20% G (5–8 mm), the UBC showed a threefold increase over that for the unreinforced case. The test with 20% G (1–4 mm) recorded the highest subgrade modulus. It was observed that the UBC calculated using finite element modeling overestimated the experimental UBC by an average of 9%.     

Siamese convolutional neural network and fusion of the best overlapping blocks for kinship verification

Multimedia Tools and Applications - Analysis of facial images decoding familial features has been attracting the attention of researchers to develop a computerized system interested in determining...     

Structural performance of steel plate shear walls with trapezoidal corrugations and centrally-placed square perforations

Steel plate shear walls (SPSWs) are an efficient lateral force-resisting system, and can be designed with corrugated and/or perforated infill plates, depending on structural considerations, architectural requirements, and service design. This paper presents a study on the structural performance of SPSWs with horizontal trapezoidal corrugations and centrally-placed square perforations under monotonic loading. Finite element models were developed for assessment of the buckling stability, stiffness, strength, and ductility performances of the shear walls. To this end, parametric studies were performed by considering the web-plate corrugation angle, thickness, and size of opening as the varying parameters in the nonlinear pushover analyses. It was found that the design of the boundary frame members can be effective in minimizing the deformations imposed by infill plates, providing system ductility, and developing lateral load resistance through stable development of diagonal tension-field action in the web plate. The effects of introducing web-plate perforations, and increasing the size of the opening, on the structural performance were also investigated. Proper design and detailing of the SPSW, along with optimal selection of the web-plate geometrical and corrugation parameters, can ensure desirable structural behavior and seismic performance for such lateral force-resisting systems.     

Al2O3/Yttria‐Stabilized Zirconia Hollow‐Fiber Membrane Incorporated with Iron Oxide for Pb(II) Removal

Removal by absorptive ceramic membranes can simultaneously absorb and separate metal ions from water. Alumina/yttria‐stabilized zirconia (Al₂O₃/YSZ) hollow‐fiber membranes, fabricated using phase inversion and sintering process, were deposited with iron oxide by an in‐situ hydrothermal process. The results showed that α‐Fe₂O₃ was produced and incorporated across the membranes. A reduction in flux was recorded with the deposition of α‐Fe₂O_3. However, it improved the adsorption capacity for heavy metal adsorption. The adsorption‐separation test demonstrated that the optimized membrane is able to completely remove Pb(II) ions after two hours.     

Development of medical cotton fabrics with Punica granatum L extract finishing for nosocomial infections control

Transmission of pathogenic microorganisms on textile in the hospital settings may contribute to nosocomial infection. This study was aimed to develop a natural antimicrobial finishing on textile that can prevent transmission of pathogenic microorganisms that meets American Association of Textiles Chemists and Colorists (AATCC) standard. Punica granatum L ethanolic extract was shown to have broad spectrum antimicrobial efficacy with bis(6-methylheptyl)-benzene-1,2-dicarboxylate and ethyl-pentadecanoate as the main bioactive constituents. Textile samples developed with the extract finishing exhibited excellent antimicrobial efficacy with a growth reduction of 99.9% on Hoheinstein Challenge Test. The wash durability of the finished textile was found good even after 30 washes with commercial detergent.