Conversion kinetics of container glass batch melting

Understanding the batch-to-glass conversion process is fundamental to optimizing the performance of glass-melting furnaces and ensuring that furnace modeling can correctly predict the observed outcome when batch materials or furnace conditions change. To investigate the kinetics of silica dissolution, gas evolution, and primary foam formation and collapse, we performed X-ray diffraction, thermal gravimetry, feed expansion tests, and evolved gas analysis of batch samples heated at several constant heating rates. We found that gas evolving reactions, foaming, and silica dissolution depend on the thermal history of the batch in a similar manner: the kinetic parameters of each process were linear functions of the square root of the heating rate. This kinetic similarity reflects the stronger-than-expected interdependence of these processes. On the basis of our results, we suggest that changes in furnace operating conditions, such as firing or boosting, influence the melting rate less than what one would expect without consideration of batch conversion kinetics.     

The role of Mn2+-rich hydrous manganese oxide in the accumulation of arsenic in lake sediments

Arsenic is present at high concentrations in the upper layer of Lake Biwa sediments and shows a depth profile similar to that of Mn. Adsorption experiments of As onto synthetic hydrous Mn oxide (HMO) in the presence of Mn²⁺ and the speciation of Mn in the sediment cores, suggest that the accumulation of As at the sediment surface results from post-depositional migration of arsenite in the sediment pore water followed by oxidation to arsenate at the sediment surface and adsorption onto Mn²⁺-rich HMO.     

Synergistic effect of Pt or Pd and perovskite oxide for water gas shift reaction

The water gas shift (WGS) reaction over Pt and Pd catalysts supported on various perovskite oxides has been investigated at 573 K without catalyst pretreatment. The Pt and Pd catalysts on LaCoO₃ support showed high catalytic activity. Interaction between Pt or Pd and the support is considered to promote the WGS reaction: Pt/LaCoO₃ had high initial activity but deactivated immediately; Pd/LaCoO₃ was less active than Pt/LaCoO₃, but had superior stability. Catalysts were characterized using XRD, STEM, XPS, and H₂-temperature programmed reduction (TPR). Results of this study showed that reduction of the support decreased the CO conversion on Pt/LaCoO₃. On the other hand, Pd/LaCoO₃ showed stable activity for the WGS reaction. Therefore, Pd was added to Pt/LaCoO₃ for stabilizing the catalyst activity, and 0.5 wt.% Pd/1 wt.% Pt/LaCoO₃ catalyst showed higher activity and stability.     

Hydraulic Model for Sedimentation in Storm-Water Detention Basins

Treatment of storm-water runoff may be necessary before discharge to surface waters. In urban areas, space constraints limit selection of conventional treatment systems, and alternative systems are needed. This research program involves design and laboratory testing of a small footprint nonproprietary detention basin which consists of pipes and box culvert sections with a specialized inlet and outlet system. This system can be placed below grade near the roadway section as part of the conventional drainage system and does not require additional right-of-way. A mathematical model, based entirely on hydraulic principles, is developed to estimate particle removal efficiency of the rectangular detention basin for the treatment of storm-water runoff by extending ideal horizontal tank theory under the condition in which water level is varied. A physical model was built in 1/5 scale to measure particle removal performance and validates the conceptual model. Experiments were performed for steady inflow conditions with different inflow rates, durations, and suspended sediment concentrations. Measured time series outflow suspended sediment concentrations and particle removal efficiency compare well with calculated results from the conceptual model. The outflow particle-size distribution can also be estimated using the conceptual model.     

Activated carbon nanofiber produced from electrospun polyacrylonitrile nanofiber as a highly efficient formaldehyde adsorbent

Electrospun polyacrylonitrile (PAN)-based nanofiber with a uniform diameter of ca. 800 nm was carbonized and steam-activated to produce activated carbon nanofiber with tailored microporosity and abundant nitrogen-containing functional groups as highly efficient adsorption sites. A remarkable amount of formaldehyde, a typical indoor pollutant, was adsorbed onto the pore surface of the PAN-based activated carbon nanofibers even at a low concentration (ca. 11 ppm), demonstrating more than twice as long as breakthrough time of formaldehyde adsorption as compared to conventional activated carbon fibers of larger fiber diameter. The tailored shallow microporosity was considered to afford the preferential adsorption of formaldehyde also in a humid environment.     

Influence of separated vortex on aerodynamic noise of an airfoil blade

In order to clarify the mechanism by which aerodynamic noise is generated from separated flow around an airfoil blade, the relation between the attack angle and the aerodynamic noise of the blade was analyzed using a wind tunnel experiment and a CFD code. In the case of rear surface separation, the separated vortex which has a large-scale structure in the direction of the blade chord is transformed into a structure that concentrates at the trailing edge with an increase in the attack angle. The aerodynamic noise level then becomes small according to the vortex scale in the blade chord. When the flow is separated at the leading edge, a separated vortex of low pressure is formed at the vicinity of the trailing edge. The pressure fluctuations on the blade surface at the vicinity of the trailing edge become large due to the vortex in the wake. It is considered that the aerodynamic noise level increases when the flow is separated at the leading edge because the separated vortex is causing the fluctuations due to wake vortex shedding.     

Microbial community change of sulfate reduction and sulfur oxidation bacteria in the activated sludge cultivated with acetate and peptone.

The growth of sulfate reducing bacteria (SRB) and filamentous sulfur bacteria was monitored on a laboratory scale in activated sludge reactors using acetate and peptone as the artificial wastewater. When the artificial wastewater contained acetate and peptone, filamentous bacteria increased in the sludge and the SVI values increased. There was a good correlation between sulfate reducing activity and sulfur oxidation activity in the produced sludge. The microbial community change of filamentous sulfur bacteria and sulfate reducing bacteria was analyzed using the fluorescent in situ hybridization (FISH) method. The tendency for the growth of filamentous sulfur bacteria Thiothrix eikelboomii following the growth of SRB was observed. The percentage of SRB385- hybridized cells and DNMA657-hybridized cells found in the total cell area increased from 2-3% to 7-10% when the filamentous bulking occurred.     

A coarse-to-fine IP-driven registration for pose estimation from single ultrasound image

A fast registration making use of implicit polynomial (IP) models is helpful for the real-time pose estimation from single clinical free-hand Ultrasound (US) image, because it is superior in the areas such as robustness against image noise, fast registration without enquiring correspondences, and fast IP coefficient transformation. However it might lead to the lack of accuracy or failure registration.In this paper, we present a novel registration method based on a coarse-to-fine IP representation. The approach starts from a high-speed and reliable registration with a coarse (of low degree) IP model and stops when the desired accuracy is achieved by a fine (of high degree) IP model. Over the previous IP-to-point based methods our contributions are: (i) keeping the efficiency without requiring pair-wised correspondences, (ii) enhancing the robustness, and (iii) improving the accuracy. The experimental result demonstrates the good performance of our registration method and its capabilities of overcoming the limitations of unconstrained freehand ultrasound data, resulting in fast, robust and accurate registration.