Fouling reduction of a poly(ether sulfone) hollow‐fiber membrane with a hydrophilic surfactant prepared via non‐solvent‐induced phase separation

Membrane fouling is still a crucial problem, especially in applications for water treatment. When fouling takes place on membrane surfaces, it causes flux decline, leading to an increase in production cost due to increased energy demand. The selection of the right membrane material and a special treatment of the membrane are required to avoid membrane fouling. This article reports the fouling resistance of a poly(ether sulfone) (PES) hollow‐fiber membrane modified with hydrophilic surfactant Tetronic 1307. Experiments on several methods of fouling were carried out to investigate the effect of the addition of nonionic surfactant Tetronic 1307 on membrane fouling. The effectiveness of a chemical agent [sodium hypochlorite (NaClO)] in the reduction of bovine serum albumin (BSA) deposition on the membrane surface was also evaluated. Permeation results showed that the fouling of a PES blend membrane with Tetronic 1307 was lower than that of the original PES membrane in the case of BSA filtration. A treatment with a 100 ppm NaClO solution was capable of removing BSA cake formation and effective at improving the relative permeability. The permeability of a PES blend membrane with Tetronic 1307 was almost 2 times higher than the original permeability when the membrane was treated with a 100 ppm NaClO solution because both BSA and Tetronic 1307 could be decomposed. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Characterization,antibacterial and in vitro compatibility of zinc–silver doped hydroxyapatite nanoparticles prepared through microwave synthesis

We investigated the possibility of enhancing hydroxyapatite (HA) bioactivity by co-substituting it with zinc and silver. Zn–Ag–HA nanoparticles were synthesized by using the microwave-assisted wet precipitation process, and their phase purity, elemental composition, morphology, and particle size were analyzed by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and energy dispersive X-ray spectroscopy (EDX). FTIR, XRD, and EDX results showed the characteristic peaks of the Zn–Ag–HA structure, while SEM results demonstrated that the nanoparticles were of spherical shape with a particle size of 70–102 nm. Antibacterial tests of the nanoparticles revealed their antibacterial activity against Staphylococcus aureus and Escherichia coli. By using simulated body fluid (SBF), an apatite layer formation was observed at 28 days. In vitro cell adhesion assay confirmed the cell attachment of normal human osteoblast (NHOst) cells to the disc surface. MTT [(3(4, 5-dimethylthiazol-2-yl)-2, 5 diphenyltetrazolium bromide] assay indicated that the cells were viable, and the cells proliferated faster on the disks than on the control surface due to the presence of metal ions. In conclusion, the novel Zn–Ag–HA nanoparticles were found to be compatible with in vitro experiments and having potential antibacterial properties. Therefore these nanoparticles could be a promising candidate for future biomedical applications.     

Effect of the addition of the surfactant Tetronic 1307 on poly(ether sulfone) porous hollow-fiber membrane formation

Poly(ether sulfone) (PES) hollow-fiber membrane was prepared via a nonsolvent-induced phase-separation method, and the effect of the addition of the surfactant Tetronic 1307 on the membrane performance and characteristics was investigated. The phase diagram of the PES/N-methyl-2-pyrrolidone (NMP)/water system was clarified. When the polymer solution involved Tetronic 1307, the amount of water required to induce the phase separation decreased, which indicated that Tetronic 1307 was one kind of nonsolvent. The kinetics of phase separation for the PES/NMP/Tetronic 1307 system were studied by light-scattering measurements. With the addition of Tetronic 1307, delayed phase separation was observed, and the structure growth rate decreased. Scanning electron microscopy images for all of the membranes showed the formation of fingerlike macrovoids through the cross section. Membrane surface morphologies were measured by atomic force microscopy. The obtained results indicated that membrane with 7 wt % Tetronic 1307 had higher roughness parameters than original membrane without the addition of surfactant. Ultrafiltration experiment results showed that the addition of Tetronic 1307 brought about an increase in water permeability and decreased the rejection of dextran with a molecular weight of about 10,000. The contact angles of water on the membrane outer surface decreased with the addition of Tetronic 1307. This mean the membrane surface became more hydrophilic. Thus, the addition of Tetronic 1307 was useful for improving the water permeability and for obtaining a hydrophilic membrane surface. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Effect of temperature on failure of gas cylinders

A number of ammonia cylinders burst during open storage in a field in the month of June. The cause of failure was studied. No flaws in the cylinder material were detected. Under normal conditions, the tangential stress (5.4 kg/mm ² )in the cylinder is well below the yield strength (49 kg/mm ² ). The tangential stress increases with the rise of temperature of the ammonia. As long as some vapor exists inside the cylinder, the liquid remains in equilibrium with the vapor, the cylinder pressure is equal to the vapor pressure of ammonia at that temperature, and the rise in tangential stress is insignificant (0.14 kg/mm ² /°C). However, as the temperature increases, the specific volume of the liquid ammonia inside the cylinder also increases. The cylinder is completely filled with liquid under certain conditions in accordance with the bulk thermal expansion of the liquid; under these conditions, the cylinder pressure rises sharply with increased temperature, causing a large rise in tangential stress (4.76 kg/mm ² /°C). Thus, an approximate 10 °C temperature rise in a cylinder filled with liquid ammonia can lead to failure.     

Modified polydimethylsiloxane/polystyrene blended IPN pervaporation membrane for ethanol/water separation

In this article a modified polydimethylsiloxane (PDMS) blended polystyrene (PS) interpenetrating polymer network (IPN) membranes supported by Teflon (polytetrafluoroethylene) ultrafiltration membrane were prepared for the separation of ethanol in water by pervaporation application. The relationship between the surface characteristics of the surface‐modified PDMS membranes and their permselectivity for aqueous ethanol solutions by pervaporation are discussed. The IPN supported membranes were prepared by sequential IPN technique. The IPN supported membrane were tested for the separation performance on 10 wt % ethanol in water and were characterized by evaluating their mechanical properties, swelling behavior, density, and degree of crosslinking. The results indicated that separation performance, mechanical properties, density, and the percentage of swelling of IPN membranes were influenced by degree of crosslink density. Depending on the feed temperature, the supported membranes had separation factors between 2.03 and 6.00 and permeation rates between 81.66 and 144.03 g m^?2 h^?1. For the azeotropic water–ethanol mixture (10 wt % ethanol), the supported membrane had at 30°C a separation factor of 6.00 and a permeation rate of 85 g m^?2 h^?1. Compared to the PDMS supported membranes, the PDMS/PS IPN supported blend membrane ones had a higher selectivity but a somewhat lower permeability. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synergistic effects of organic and inorganic additives in preparation of composite poly(vinylidene fluoride) antifouling ultrafiltration membranes

Composite ultrafiltration membranes were successfully fabricated by blending a nonionic surfactant and inorganic nanoparticles via a nonsolvent-induced phase separation (NIPS) method. Brij35 was used as the nonionic surfactant and silica (SiO₂) nanoparticles from rice husk ash, a low cost and widely available material, were used as the inorganic nanoparticles. The synergetic effect of both additives was used to tailor the membrane structure and properties because the selected additives showed completely different or, in some cases, the opposite effect on the membrane properties and structure. The combined effects of Brij and SiO₂ resulted in a membrane with a noticeable improvement in membrane overall performance including pure water permeability, hydrophilicity, antifouling properties, long-term stability, tensile strength, on the cost of a slight decrease in membrane elongation. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47737.     

Human health risk assessment of chlorinated disinfection by-products in drinking water using a probabilistic approach

The presence of chlorinated disinfection by-products (DBPs) in drinking water is a public health issue, due to their possible adverse health effects on humans. To gauge the risk of chlorinated DBPs on human health, a risk assessment of chloroform (trichloromethane (TCM)), bromodichloromethane (BDCM), dibromochloromethane (DBCM), bromoform (tribromomethane (TBM)), dichloroacetic acid (DCAA) and trichloroacetic acid (TCAA) in drinking water was carried out using probabilistic techniques. Literature data on exposure concentrations from more than 15 different countries and adverse health effects on test animals as well as human epidemiological studies were used. The risk assessment showed no overlap between the highest human exposure dose (EXP(D)) and the lowest human equivalent dose (HED) from animal test data, for TCM, BDCM, DBCM, TBM, DCAA and TCAA. All the HED values were approximately 10(4)-10(5) times higher than the 95th percentiles of EXP(D). However, from the human epidemiology data, there was a positive overlap between the highest EXP(D) and the lifetime average daily doses (LADD(H)) for TCM, BDCM, DCAA and TCAA. This suggests that there are possible adverse health risks such as a small increased incidence of cancers in males and developmental effects on infants. However, the epidemiological data comprised several risk factors and exposure classification levels which may affect the overall results.     

Numbering with spiral pattern to prove authenticity and integrity in medical images

With the rapid development of technology in digital multimedia, manipulation and misconduct of digital data are soaring. The watermarking procedure is seen as helpful to protect the security of digital images which are highly confidential such as medical images. In this study, an efficient watermarking method for greyscale images is proposed. The scheme is designed to achieve good numbering pattern, exact detection and image recovery. The proposed scheme uses a unique spiral pattern numbering before implementing the block-based mechanism for embedding. The experiment tests the difference between using normal pattern and unique spiral pattern in numbering, and the results show that the proposed method produces a great quality value of embedded image with great tamper localization and recovery ability. This function can help in proving authenticity and integrity of medical images in the system.     

Effect of hypochlorite treatment on performance of hollow fiber membrane prepared from polyethersulfone/N‐methyl‐2‐pyrrolidone/tetronic 1307 solution

Polyethersulfone (PES) hollow fiber membrane was prepared by blending with nonionic surfactant Tetronic 1307 to improve its hydrophilicity. The membranes were posttreated by hypochlorite solution of 10, 100, 500, and 2000 ppm. The effect of hypochlorite treatment on the performance of PES membrane was investigated. Experimental results showed that the water permeability of treated membrane was two to three times higher than that of untreated membrane in case of blend membrane prepared from PES/N‐methyl‐2‐pyrrolidone (NMP)/Tetronic 1307 solution. On the other hand, hypochlorite treatment has no effect on water permeability of the membrane prepared from PES/NMP solution. Elemental analysis and ATR–FTIR measurement results indicated that hypochlorite treatment led to decomposition and leaching out of Tetronic 1307 component from the membrane. The change of membrane surface structure by the hypochlorite treatment was confirmed by atomic force microscopy measurement. The hypochlorite treatment brought about no significant impact on the mechanical property of the membranes. This indicated that the hypochlorite treatment of PES membrane prepared with surfactant was a useful way to improve the water permeability without the decrease of membrane strength. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008