Neuroscience and architecture: What does the brain tell to an emotional experience of architecture via a functional MR study?

Environment psychologically affects individuals. According to the base of cognitive psychology, there is a direct relationship between human behavior, environment, and emotional process. Assuming that pleasantness and unpleasantness are associated with peripheral nervous system activation, the current study aims to explore if the pleasant or unpleasant architectural places can stimulate the brain regions engaged in emotions or not. As the main contribution, we used functional magnetic resonance imaging (fMRI) measuring blood oxygenation level-dependent (BOLD) changes to effectively detect the brain's region that mainly responds to the emotional-perceptual processes. Based on the results of examining the emotional assessment model of “Pleasure-Arousal” applied to 140 students, 30 most-rated images representing 15 pleasant and 15 unpleasant places were shown to 32 participants in a 1.5-T MRI scanner. After applying standard preprocessing steps (re-alignment, slice-timing, co-registration, segmentation, normalization, and smoothing) to functional MR images, first-level analysis was applied to each subject. The results were evaluated using statistical corrections at different levels for female and male participants with the second-level analysis. In conclusion, it has been shown that there is a significant linkage between environmental experience and brain activation so that the architectural qualities can change blood flow in specific brain regions.     

An experimental study of forced convective heat transfer for fully developed Al 2 O 3 –water nanofluid in an annulus tube

Nanofluids have been known as practical materials to ameliorate heat transfer within diverse industrial systems. The current work presents an empirical study on forced convection effects of Al₂O₃–water nanofluid within an annulus tube. A laminar flow regime has been considered to perform the experiment in high Reynolds number range using several concentrations of nanofluid. Also, the boundary conditions include a constant uniform heat flux applied on the outer shell and an adiabatic condition to the inner tube. Nanofluid particle is visualized with transmission electron microscopy to figure out the nanofluid particles. Additionally, the pressure drop is obtained by measuring the inlet and outlet pressure with respect to the ambient condition. The experimental results showed that adding nanoparticles to the base fluid will increase the heat transfer coefficient (HTC) and average Nusselt number. In addition, by increasing viscosity effects at maximum Reynolds number of 1140 and increasing nanofluid concentration from 1% to 4% (maximum performance at 4%), HTC increases by 18%.     

A comprehensive review of renewable energy resources for electricity generation in Australia

Recently, renewable energy resources and their impacts have sparked a heated debate to resolve the Australian energy crisis. There are many projects launched throughout the country to improve network security and reliability. This paper aims to review the current status of different renewable energy resources along with their impacts on society and the environment. Besides, it provides for the first time the statistics of the documents published in the field of renewable energy in Australia. The statistics include information such as the rate of papers published, possible journals for finding relative paper, types of documents published, top authors, and the most prevalent keywords in the field of renewable energy in Australia. It will focus on solar, wind, biomass, geothermal and hydropower technologies and will investigate the social and environmental impacts of these technologies.     

Mathematical Modeling the Drying of Poplar Wood Particles in a Closed-Loop Triple Pass Rotary Dryer

Closed-loop drying systems are an attractive alternative to conventional drying systems because they provide a wide range of potential advantages. Consequently, type of drying process is attracting increased interest. Rotary drying of wood particles can be assumed as an incorporated process involving fluid–solid interactions and simultaneous heat and mass transfer within and between the particles. Understanding these mechanisms during rotary drying processes may result in determination of the optimum drying parameters and improved dryer design. In this study, due to the complexity and nonlinearity of the momentum, heat, and mass transfer equations, a computerized mathematical model of a closed-loop triple-pass concurrent rotary dryer was developed to simulate the drying behavior of poplar wood particles within the dryer drums. Wood particle moisture content and temperature, drying air temperature, and drying air humidity ratio along the drums lengths can be simulated using this model. The model presented in this work has been shown to successfully predict the steady-state behavior of a concurrent rotary dryer and can be used to analyze the effects of various drying process parameters on the performance of the closed-loop triple-pass rotary dryer to determine the optimum drying parameters. The model was also used to simulate the performance of industrial closed-loop rotary dryers under various operating conditions.     

Equivalent linear model for fully self‐centering earthquake‐resisting systems

Modern rocking and stepping cores have been known as the efficient self‐centering earthquake‐resisting systems (SC‐ERSs). The current article proposes an approximate equivalent linear (EL) model for rapid estimation of the SC‐ERS displacement. An equivalent damping ratio and effective stiffness are formulated for flag‐shaped hysteresis of a fully SC‐ERS. The approximate EL model is first established using secant stiffness and Jacobsen's damping model. Nonlinear response history analyses are carried out to compare exact and approximated peak displacements. Findings reveal that EL analysis of the SC‐ERS based on Jacobsen's damping leads to underestimation of the maximum inelastic displacement. Accordingly, a new optimal damping formula is proposed using a genetic algorithm and nonlinear regression analyses. The improved EL model is validated by practical examples, and the results show acceptable accuracy in design‐level displacement estimation.     

Removal of bisphenol A and 17α-ethinyl estradiol from landfill leachate using single-walled carbon nanotubes

In this study, the adsorption of bisphenol A (BPA) and 17α-ethinyl estradiol (EE2) from landfill leachate onto single-walled carbon nanotubes (SWCNTs) was investigated. Different leachate solutions were prepared by altering the pH, ionic strength, and dissolved organic carbon (DOC) in the solutions to mimic the varying water conditions that occur in leachate during the various stages of waste decomposition. The youngest and oldest leachate solutions contained varying DOC and background chemistry and were represented by leachate Type A (pH = 5.0; DOC = 2500 mg/L; conductivity = 12,500 μS/cm; [Ca²⁺] = 1200 mg/L; [Mg²⁺] = 470 mg/L) and Type E (pH = 7.5; DOC = 250 mg/L; conductivity = 3250 μS/cm; [Ca²⁺] = 60 mg/L; [Mg²⁺] = 180 mg/L). These solutions were subsequently combined in different ratios to produce intermediate solutions, labeled B-D, to replicate time-dependent changes in leachate composition. Overall, a larger fraction of EE2 was removed as compared to BPA, consistent with its higher log K_OW value. The total removal of BPA and EE2 decreased in older leachate solutions, with the adsorptive capacity of SWCNTs decreasing in the order of leachate Type A > Type B > Type C > Type D > Type E. An increase in the pH from 3.5 to 11 decreased the adsorption of BPA by 22% in young leachate and by 10% in old leachate. The changes in pH did not affect the adsorption of EE2 in the young leachate, but did reduce adsorption by 32% in the old leachate. Adjusting the ionic strength using Na⁺ did not significantly impact adsorption, while increasing the concentration of Ca²⁺ resulted in a 12% increase in the adsorption of BPA and a 19% increase in the adsorption of EE2. DOC was revealed to be the most influential parameter in this study. In the presence of hydrophilic DOC, represented by glucose in this study, adsorption of the endocrine disrupting compounds (EDCs) onto the SWCNTs was not affected. In the absence of SWCNTs, hydrophobic DOC (i.e., humic acid) adsorbed 15-20% of BPA and EE2. However, when the humic acid and SWCNTs were both present, the overall adsorptive capacity of the SWCNTs was reduced. Hydrophobic (π-π electron donor-acceptor) interactions between the EDCs and the constituents in the leachate, as well as interactions between the SWCNTs and the EDCs, are proposed as potential adsorption mechanisms for BPA and EE2 onto SWCNTs.     

Controller Design Using Ant Colony Algorithm for a Non-inverting Buck–Boost Chopper Based on a Detailed Average Model

In this article, the non-inverting buck–boost converter and its operation modes are scrutinized. The closed-loop stability of the converter in buck and boost modes is analyzed, and the necessity of using an appropriated controller is demonstrated. Then the application of an adapted ant colony optimization to design a feedback controller is proposed, and a controller based on its existing model is tuned. Simulation and experimental results obtained from the ant colony optimization designed controller are then compared with a controller designed with the classic method. Although the simulation and experimental results prove the efficiency of the proposed control approach, a significant difference between controller behavior in practice and simulation is obvious. Finding these differences, more detailed models, including all parasitic elements, in the buck and boost modes are derived. Applying the proposed model in controller design illustrates that the desired performance of the converter can be guaranteed with a simple proportional-integral (PI) controller. The suggested ant colony-based controller is again tuned based on the more detailed model, which improves the performance of the converter system even more. Furthermore, good agreement between analytical and experimental outputs validates the accuracy of the modeling and simulation.     

Linear circuits: a measurement‐based approach

This paper proposes a new measurement‐based approach that can solve synthesis problems in unknown linear circuits. The method makes use of a small number of measurements to determine the functional dependency of any circuit signal or variable on any set of design variables. Once the functional dependency is obtained, the design requirements can be applied to find the design parameter values. The results are described for linear direct current and alternating current circuits. Copyright © 2013 John Wiley & Sons, Ltd.     

Investigation of Hydrodynamics of High‐Temperature Fluidized Beds by Pressure Fluctuations

Hydrodynamics of a gas‐solid fluidized bed at elevated temperatures was investigated by analyzing pressure fluctuations in time and frequency domains. Sand particles were fluidized with air at various bed temperatures. At a constant gas velocity, the standard deviation, power spectrum density function, and wide‐band energy of pressure fluctuations reach a maximum at 300 °C. Increasing the temperature to this value causes larger bubble sizes and after the bubbles reach their maximum size, they break into smaller bubbles. The Archimedes number decreases with higher temperature and the type of fluidization becomes closer to that of Geldart A boundary at this maximum temperature. Based on estimation of the drag force acting on the emulsion phase, it was concluded that 300 °C was a transition temperature at which the drag force reaches a minimum due to a significant change of interparticle and hydrodynamic forces.     

Survey of Motion Planning Literature in the Presence of Uncertainty: Considerations for UAV Guidance

This paper provides a survey of motion planning techniques under uncertainty with a focus on their application to autonomous guidance of unmanned aerial vehicles (UAVs). The paper first describes the primary sources of uncertainty arising in UAV guidance and then describes relevant practical techniques that have been reported in the literature. The paper makes a point of distinguishing between contributions from the field of robotics and artificial intelligence, and the field of dynamical systems and controls. Mutual and individual contributions for these fields are highlighted providing a roadmap for tackling the UAV guidance problem.