DFT-based no-reference quality assessment of blurred images

Multimedia Tools and Applications - In this paper, blind image quality assessment (IQA) of Gaussian blurred images based on Discrete Fourier Transform (DFT) is proposed. The proposed work is based...     

An experimental study of forced convective heat transfer for fully developed Al 2 O 3 –water nanofluid in an annulus tube

Nanofluids have been known as practical materials to ameliorate heat transfer within diverse industrial systems. The current work presents an empirical study on forced convection effects of Al₂O₃–water nanofluid within an annulus tube. A laminar flow regime has been considered to perform the experiment in high Reynolds number range using several concentrations of nanofluid. Also, the boundary conditions include a constant uniform heat flux applied on the outer shell and an adiabatic condition to the inner tube. Nanofluid particle is visualized with transmission electron microscopy to figure out the nanofluid particles. Additionally, the pressure drop is obtained by measuring the inlet and outlet pressure with respect to the ambient condition. The experimental results showed that adding nanoparticles to the base fluid will increase the heat transfer coefficient (HTC) and average Nusselt number. In addition, by increasing viscosity effects at maximum Reynolds number of 1140 and increasing nanofluid concentration from 1% to 4% (maximum performance at 4%), HTC increases by 18%.     

Steerable Microinvasive Probes for Localized Drug Delivery to Deep Tissue

Enhanced understanding of neuropathologies has created a need for more advanced tools. Current neural implants result in extensive glial scarring and are not able to highly localize drug delivery due to their size. Smaller implants reduce surgical trauma and improve spatial resolution, but such a reduction requires improvements in device design to enable accurate and chronic implantation in subcortical structures. Flexible needle steering techniques offer improved control over implant placement, but often require complex closed‐loop control for accurate implantation. This study reports the development of steerable microinvasive neural implants (S‐MINIs) constructed from borosilicate capillaries (OD = 60 µm, ID = 20 µm) that do not require closed‐loop guidance or guide tubes. S‐MINIs reduce glial scarring 3.5‐fold compared to prior implants. Bevel steered needles are utilized for open‐loop targeting of deep‐brain structures. This study demonstrates a sinusoidal relationship between implant bevel angle and the trajectory radius of curvature both in vitro and ex vivo. This relationship allows for bevel‐tipped capillaries to be steered to a target with an average error of 0.23 mm ± 0.19 without closed‐loop control. Polished microcapillaries present a new microinvasive tool for chronic, predictable targeting of pathophysiological structures without the need for closed‐loop feedback and complex imaging.     

Three‐dimensional computational comparison of mini pinned heat sinks using different nanofluids: Part one—the hydraulic‐thermal characteristics

The hydraulic‐thermal characteristics of 3D pinned heat sink designs have been numerically compared as the first part of a three‐part investigation. Five different pin geometries (circular, square, triangular, strip, and elliptic pins) and an unpinned heat sink with three types of nanofluids (Al₂O₃–H₂O, SiO₂–H₂O, and CuO–H₂O) are considered for laminar forced convection. The range of Reynolds number is from 100 to 1000, and volume fractions vary between 0% and 5%. The finite volume method is employed to solve the Navier–Stokes and energy equations by employing a SIMPLE algorithm for a computational solution. Three parameters are presented—the Nusselt number, the bottom temperature, and the hydrothermal performance of the heat sink with pressure drop data. The findings indicated that the overall hydrothermal performance of elliptic‐pinned (EP) heat sinks produces the most substantial value of 3.10 for pure water. For different nanofluids, the SiO₂–water nanofluids with EPs have the most significant hydrothermal performance. Also, this factor is enhanced with an increase in nanofluid concentration up to nearly 3.34 for 5% of SiO₂–water. Consequently, applying the elliptic‐pinned heat sinks is recommended with pure water for considering an increase in the pressure drop, with 5% of SiO₂–water nanofluids, regardless of an enlargement of pressure drop for heat‐dissipation applications.     

Impregnated active layer combustion synthesis of nano MgFe2O4 using green template

Nano-Magnesium ferrite (MgFe₂O₄) powders have been prepared by a modified combustion synthesis method named impregnated active layer combustion (IALC). The effects of five important parameters such as main fuel to oxidizer ratio (F/O), main fuel type, added fuel type, template type and main fuel (Added F/MF) to the added fuel ratio have been studied using Taguchi design. Xylitol, D-mannitol, ethylene diamine tetra acetic acid (EDTA) and diethylene triamine penta acetic acid (DTPA) were used as fuels. Besides, waste newspaper and Platanus orientalis leaf (POL) were used as new green templates. Samples were characterized by XRD, XRF, SEM, TEM, BET and VSM analyses. Results showed that the average crystallite size of the sample prepared under optimized condition (mixture of Xylitol and DTPA as fuel, POL as template, and Added F/MF ratio of 0.75) was 17.66?nm. The result was confirmed by TEM. The saturated magnetization of the optimum sample was 21?emu/g and the specific surface area was 15.377?m²/g.     

A passivity‐based simple adaptive synergetic control for a class of nonlinear systems

For a class of nonlinear systems with the representation {A(x), B(x), C} and where the system parameters and dynamics are unknown, a simple adaptive synergetic controller ensuring the asymptotic convergence of the system to a desired manifold is proposed based on the technique of simple adaptive control (SAC). It is well known that the design of the synergetic control (SC) law requires a thorough knowledge of the system parameters and dynamics. Such problem obstructs the synthesis of the SC law and the designer is prompted to pass through the estimation methods, which, in turn, poses a problem of increasing the computation time of the control algorithm. To cope with this problem, a solution is proposed by modifying the original SC law to develop an SAC‐like adaptive SC law without the need of prior knowledge of the system. The stability of the proposed adaptive controller is formally proven via the Lyapunov approach. Experimental application to a quadrotor system is given to validate the theoretical results.     

Robust resource allocation scheme under channel uncertainties for LTE-A systems

Wireless Networks - Nowadays, resource allocation is one of the major problems in the cellular networks. Due to the increasing number of autonomous heterogeneous devices in future mobile networks,...     

Expression of Main Toll-Like Receptors in Patients with Different Types of Colorectal Polyps and Their Relationship with Gut Microbiota

Abnormal activation of Toll-like receptor (TLRs) signaling can result in colon cancer development. The aim of this study was to investigate the expression of important TLRs in different histological types of colorectal polyps and evaluate their relationship with intestinal microbiota. The expression levels of TLR2, 3, 4, and 5 were analyzed in intestinal biopsy specimens of 21 hyperplastic polyp (HP), 16 sessile serrated adenoma (SSA), 29 tubular adenoma (TA), 21 villous/tubulovillous (VP/TVP) cases, and 31 normal controls. In addition, selected gut bacteria including Streptococcus bovis, Enterococcus faecalis, Enterotoxigenic Bacteroides fragilis (ETBF), Fusobacterium nucleatum, Porphyromonas spp., Lactobacillus spp., Roseburia spp., and Bifidobacterium spp. were quantified in fecal samples using absolute qRT PCR, and, finally, the association between TLRs and these gut microbiota- was evaluated by Spearman’s correlation coefficient. Higher expression of TLR2 and TLR4 in VP/TVP and TA, and lower expression levels of TLR3 and TLR5 in all type of polyps were observed. The differences in TLR expression patterns was not only dependent on the histology, location, size, and dysplasia grade of polyps but also related to the intestinal microbiota patterns. TLR2 and TLR4 expression was directly associated with the F. nucleatum, E. faecalis, S. bovis, Porphyromonas, and inversely to Bifidobacterium, Lactobacillus, and Roseburia quantity. Furthermore, TLR3 and TLR5 expression was directly associated with Bifidobacterium, Roseburia, and Lactobacillus quantity. Our results suggest a possible critical role of TLRs during colorectal polyp progression. An abnormal regulation of TLRs in relation to gut microbial quantity may contribute to carcinogenesis.