Two-step sinter-crystallization of K2O–CaO–P2O5–SiO2 (45S5-K) bioactive glass

Bioactive glasses and glass-ceramics (GCs) effectively regenerate bone tissue, however most GCs show improved mechanical properties. In this work, we developed and tested a rarely studied bioactive glass composition (24.4K₂O-26.9CaO-46.1SiO₂-2.6P₂O₅ mol%, identified as 45S5-K) with different particle sizes and heating rates to obtain a sintered GC that combines good fracture strength, low elastic modulus, and bioactivity. We analyzed the influence of the sintering processing conditions in the elastic modulus, Vickers microhardness, density, and crystal phase formation in the GC. The best GC shows improved properties compared with its parent glass. This glass achieves a good densification degree with a two-step viscous flow sintering approach and the resulting GC shows as high bioactivity as that of the standard 45S5 Bioglass®. Furthermore, the GC elastic modulus (56 GPa) is relatively low, minimizing stress shielding. Therefore, we unveiled the glass sintering behavior with concurrent crystallization of this complex bioactive glass composition and developed a potential GC for bone regeneration.     

Update on the Diagnostic Pitfalls of Autopsy and Post-Mortem Genetic Testing in Cardiomyopathies

Inherited cardiomyopathies are frequent causes of sudden cardiac death (SCD), especially in young patients. Despite at the autopsy they usually have distinctive microscopic and/or macroscopic diagnostic features, their phenotypes may be mild or ambiguous, possibly leading to misdiagnoses or missed diagnoses. In this review, the main differential diagnoses of hypertrophic cardiomyopathy (e.g., athlete’s heart, idiopathic left ventricular hypertrophy), arrhythmogenic cardiomyopathy (e.g., adipositas cordis, myocarditis) and dilated cardiomyopathy (e.g., acquired forms of dilated cardiomyopathy, left ventricular noncompaction) are discussed. Moreover, the diagnostic issues in SCD victims affected by phenotype-negative hypertrophic cardiomyopathy and the relationship between myocardial bridging and hypertrophic cardiomyopathy are analyzed. Finally, the applications/limits of virtopsy and post-mortem genetic testing in this field are discussed, with particular attention to the issues related to the assessment of the significance of the genetic variants.     

Sliding-wear resistance of pure near fully-dense B4C under lubrication with water,diesel fuel,and paraffin oil

The sliding-wear resistance of pure near fully-dense B₄C is investigated, and the wear mode/mechanisms identified, under lubrication with water, diesel fuel, and paraffin oil. It is found that the wear is mild in the three cases, with specific wear rates (SWRs) of 10^?16–10^?17 m³/N m. Nonetheless, the wear resistance of the B₄C ceramic is one order of magnitude greater under oil lubrication (10¹⁶ N m/m³) than under water lubrication (10¹⁵ N m/m³), and twice as great for the specific case of paraffin oil than diesel fuel, attributable to the lubricant’s viscosity. It is also found that the wear mode is always abrasion, and that the wear mechanisms are plastic deformation and localized fracture with grain pullout. However, in agreement with the macro-wear data, the severity of the wear damage is lower under lubrication with paraffin oil, followed by diesel fuel, and lastly water. Finally, microstructural considerations are discussed with a view to enhancing the sliding-wear resistance of B₄C triboceramics.     

Rare Titin (TTN) Variants in Diseases Associated with Sudden Cardiac Death

A leading cause of death in western countries is sudden cardiac death, and can be associated with genetic disease. Next-generation sequencing has allowed thorough analysis of genes associated with this entity, including, most recently, titin. We aimed to identify potentially pathogenic genetic variants in titin. A total of 1126 samples were analyzed using a custom sequencing panel including major genes related to sudden cardiac death. Our cohort was divided into three groups: 432 cases from patients with cardiomyopathies, 130 cases from patients with channelopathies, and 564 post-mortem samples from individuals showing anatomical healthy hearts and non-conclusive causes of death after comprehensive autopsy. None of the patients included had definite pathogenic variants in the genes analyzed by our custom cardio-panel. Retrospective analysis comparing the in-house database and available public databases also was performed. We identified 554 rare variants in titin, 282 of which were novel. Seven were previously reported as pathogenic. Of these 554 variants, 493 were missense variants, 233 of which were novel. Of all variants identified, 399 were unique and 155 were identified at least twice. No definite pathogenic variants were identified in any of genes analyzed. We identified rare, mostly novel, titin variants that seem to play a potentially pathogenic role in sudden cardiac death. Additional studies should be performed to clarify the role of these variants in sudden cardiac death.     

Assessment of Mineralogical,Textural, and Water Chemistry Changes During Long-Distance Tailings-Slurry Transport

An exploratory study demonstrated that subtle changes in solids and process water were caused by long-distance turbulent transport of tailings from the concentrator to the impoundment of a Cu (Mo) porphyry copper deposit. Slurry water chemical analysis was complemented by modelling potential phase precipitation or dissolution and speciation of dissolved metals. It was found that transport did not affect major insoluble mineral phases. However, the degrees of liberation of several phyllosilicates, as determined by automated mineralogy, were reduced close to the impoundment, which points to separation of clay particles from tectosilicate surfaces by the turbulence; this also was observed by SEM examination of micro-aggregate specimens. Reduction of maximum particle sizes, increased N2 monolayer adsorption, and resultant specific surface areas indicate that transport modified the micro-aggregates. Major element water chemistry is controlled by the presence of soluble mineral phases, such as gypsum, and reagents, such as lime, in the flotation process. Changes in the dissolved concentrations of some elements could potentially affect tailings deportment in the impoundment. Increased concentrations of Al may affect the clay settling behaviour, while Mo and As levels will require treatment prior to the discharge of water from the tailings impoundment. This study demonstrated that systematic scrutiny of tailings slurries leaving the concentrator and before entering the impoundment can be potentially useful, though care will have to be exercised to replicate sample handling and analytical conditions, during any long-term monitoring.     

Antifungal and antimycotoxigenic effects of Zingiber officinale,Cinnamomum zeylanicum and Cymbopogon martinii essential oils against Fusarium verticillioides

ABSTRACT

There is an increasing demand for fungi control in grains, especially toxigenic. Also, there is growing concern on the use of synthetic fungicides; thus alternatives are needed. The aim of this study was to evaluate the antifungal and antimycotoxigenic action of essential oils (EOs) from Zingiber officinale, Cinnamomum zeylanicum and Cymbopogon martinii against Fusarium verticillioides, a spoilage and toxigenic fungus. Essential oils were first chemically characterised by gas chromatography coupled to mass spectrometry, and their antioxidant potential was measured by the DPPH, ABTS and FRAP methods. Minimum inhibitory concentration (MIC) and disc diffusion were used to assess antifungal activity. Scanning electron microscopy was used to evaluate morphological changes in the fungus. Antimycotoxigenic activity of the EOs against the production of fumonisin B₁ and B₂ by F. verticillioides was evaluated using ultra-high-performance liquid chromatography system. Z. officinale, C. zeylanicum and C. martinii EOs were predominantly composed by zingiberene and geranial; eugenol; and geraniol, respectively. All the EOs had high antioxidant power, especially that from C. zeylanicum. The MICs were 250, 500 and 2,000 µg mL^?1 for C. zeylanicum, C. martinii and Z. officinale EOs, respectively. Mycelial reduction of F. verticillioides was observed when EOs were used, and the lowest activity was detected in the Z. officinale EO. Overall, the tested EOs promoted structural damage to the fungal cell wall, decreased conidia size and mycelial reduction. Antimycotoxigenic evaluation of the EOs evidenced a significant reduction (p < .05) in the production of fumonisins B₁ and B₂ with all the EOs evaluated in the study. These results suggest that especially C. zeylanicum and C. martinii EOs are highly useful for controlling F. verticillioides and fumonisins production.     

A dimensional reduction approach to modulate the core ruminal microbiome associated with methane emissions via selective breeding

The rumen is a complex microbial system of substantial importance in terms of greenhouse gas emissions and feed efficiency. This study proposes combining metagenomic and host genomic data for selective breeding of the cow hologenome toward reduced methane emissions. We analyzed nanopore long reads from the rumen metagenome of 437 Holstein cows from 14 commercial herds in 4 northern regions in Spain. After filtering, data were treated as compositional. The large complexity of the rumen microbiota was aggregated, through principal component analysis (PCA), into few principal components (PC) that were used as proxies of the core metagenome. The PCA allowed us to condense the huge and fuzzy taxonomical and functional information from the metagenome into a few PC. Bivariate animal models were applied using these PC and methane production as phenotypes. The variability condensed in these PC is controlled by the cow genome, with heritability estimates for the first PC of ~0.30 at all taxonomic levels, with a large probability (>83%) of the posterior distribution being >0.20 and with the 95% highest posterior density interval (95%HPD) not containing zero. Most genetic correlation estimates between PC1 and methane were large (≥0.70), with most of the posterior distribution (>82%) being >0.50 and with its 95%HPD not containing zero. Enteric methane production was positively associated with relative abundance of eukaryotes (protozoa and fungi) through the first component of the PCA at phylum, class, order, family, and genus. Nanopore long reads allowed the characterization of the core rumen metagenome using whole-metagenome sequencing, and the purposed aggregated variables could be used in animal breeding programs to reduce methane emissions in future generations.