Isolate-Specific Effect of Entomopathogenic Endophytic Fungi on Population Growth of Two-Spotted Spider Mite (Tetranychus urticae Koch) and Levels of Steroidal Glycoalkaloids in Tomato

Journal of Chemical Ecology - Entomopathogenic fungi (EPF) can be experimentally established in several plant species as endophytes. Ecological effects of EPF inoculations on plant growth and...     

Development and evaluation of sub-element testing of SiC/SiC ceramic matrix composites at elevated temperatures

SiC/SiC ceramic matrix composites (CMCs) are being developed for use in aero-engines to replace nickel superalloy components. Sub-element testing acts as the key stepping stone in bridging understanding derived from basic coupon testing and more complex component testing. This study presents the development of high temperature C-shape sub-element testing with the use of digital image correlation to study damage progression. The specimen is designed with a bias towards a mixed mode-stress state more similar to what a CMC component may see in service. Both monotonic and fatigue tests were completed on C specimens and compared with predicted behaviour from modelling. Test data from both test types suggested that specimens were failing once they reached a critical radial stress level. However evidence from fractography of specimens showed that in both monotonic and fatigue tests radial cracks (driven by hoop stresses) are initiating prior to circumferential cracks.     

Predicting Elastomer-Fluid Compatibility for Hydraulic Systems

The elastomers used in sealing hydraulic and similar systems are frequently swollen or shrunk by prolonged contact with the fluids. The fundamental properties, especially the Hildebrand Solubility Parameter, of the fluid and elastomer components are related to these tendencies.

Basically, the Solubility Parameter concept has been used to predict suitable elastomeric sealing materials for various fluids by avoiding close matches in solubility parameter. The present studies have shown that: (a) copolymer performance cannot always be predicted by averaging the properties of the homopolymers; (b) mixtures of solvents may not behave like an imaginary single fluid of average properties; and (c) chemical interactions, hydrogen bonding, and molecular shape factors introduce major complications. New correlations are proposed to enable the hydraulic engineer to obtain Solubility Parameters from the more common properties of heavy petroleum fractions.     

The affordability of “affordable” housing in England: conditionality and exclusion in a context of welfare reform

Abstract

Contemporary debates around affordability have largely focused on homeownership and private renting. This article considers the affordable social rented sector in England, in which reforms to social welfare assistance, reduced security of tenure, and a shift towards mid-market rents, are changing access to ‘affordable’ housing for those on the lowest incomes. Drawing on in-depth interviews with housing associations and stakeholders, the article highlights the increasing use of affordability assessments for prospective tenants. These assessments interact with mid-market rental products to increase the potential for exclusion from affordable housing on the grounds of ability to pay. This conditionality is applied not only at the point of tenancy access, but also at renewal of fixed-term tenancies. The research highlights that the combination of welfare and housing policies, in the context of a financialising housing association sector, has the potential to erode access to social housing for those who are perceived as a financial risk, reshaping the focus of social housing.     

Thermal polymerization of thiol–ene network‐forming systems

The thermal polymerization of a tetrafunctional thiol (PETMP) and divinyl ether (TEGDVE) was monitored by temperature‐ramping differential scanning calorimetry (DSC) and the effects of inhibitor type and concentration, oxygen inhibition and initiator type were studied. The incorporation of inhibitors was required to produce a stable system at room temperature. Butylated hydroxytoluene (BHT) inhibited polymerization at low temperatures, but was inefficient at high temperatures and polymerization rates, and hence BHT is an ideal stabilizer. In contrast, a nitroxide inhibitor (NO‐67) was a very effective inhibitor and no polymerization occurred until all of the nitroxide was depleted. The presence of oxygen retarded the onset of polymerization but did not change the final conversion significantly. Polymerization with initiators having higher half‐life temperatures shifted the DSC peak to higher temperature because the rate of initiator decomposition and thus initiation was slower. Rheological investigations of the cure at different temperatures revealed that the gel time decreased significantly with increasing cure temperature, and the calculated apparent activation energy for PETMP/TEGDVE was 54 kJ mol^?1. Dynamical mechanical thermal analysis of the cured material was undertaken and frequency‐superposed results revealed that the glass transition region of PETMP/TEGDVE/azobisisobutyronitrile was much narrower than that of free‐radically cured dimethacrylate, but was similar to that of an epoxy resin cured with an aromatic diamine. This behaviour could be attributed to PETMP/TEGDVE network homogeneity, or to the less constrained crosslinks in the PETMP/TEGDVE network. Copyright © 2007 Society of Chemical Industry     

Progress in lattice Boltzmann methods for magnetohydrodynamic flows relevant to fusion applications

In this paper, an approach to simulating magnetohydrodynamic (MHD) flows based on the lattice Boltzmann method (LBM) is presented. The dynamics of the flow are simulated using a so-called multiple relaxation time (MRT) lattice Boltzmann equation (LBE), in which a source term is included for the Lorentz force. The evolution of the magnetic induction is represented by introducing a vector distribution function and then solving an appropriate lattice kinetic equation for this function. The solution of both distribution functions are obtained through a simple, explicit, and computationally efficient stream-and-collide procedure. The use of the MRT collision term enhances the numerical stability over that of a single relaxation time approach. To apply the methodology to solving practical problems, a new extrapolation-based method for imposing magnetic boundary conditions is introduced and a technique for simulating steady-state flows with low magnetic Prandtl number is developed. In order to resolve thin layers near the walls arising in the presence of high magnetic fields, a non-uniform gridding strategy is introduced through an interpolated-streaming step applied to both distribution functions. These advances are particularly important for applications in fusion engineering where liquid metal flows with low magnetic Prandtl numbers and high Hartmann numbers are introduced. A number of MHD benchmark problems, under various physical and geometrical conditions are presented, including 3-D MHD lid driven cavity flow, high Hartmann number flows and turbulent MHD flows, with good agreement with prior data. Due to the local nature of the method, the LBM also demonstrated excellent performance on parallel machines, with almost linear scaling up to 128 processors for a MHD flow problem.     

An improved accelerated weathering protocol to anticipate Florida exposure behavior of coatings

A new accelerated weathering protocol has been developed which closely replicates the performance of automotive and aerospace coating systems exposed in South Florida. IR spectroscopy was used to verify that the chemical composition changes that occurred during accelerated weathering in devices with a glass filter that produced a high fidelity reproduction of sunlight’s UV spectrum matched those that occurred during natural weathering. Gravimetric water absorption measurements were used to tune the volume of water absorption during accelerated weathering to match that which occurred during natural weathering in South Florida. The frequency of water exposure was then scaled to the appropriate UV dose. A variety of coating systems were used to verify the correlation between the physical failures observed in the accelerated weathering protocol and natural weathering in South Florida. The new accelerated weathering protocol correctly reproduced gloss loss, delamination, cracking, blistering, and good performance in a variety of diverse coating systems. For automotive basecoat/clearcoat paint systems, the new weathering protocol shows significant acceleration over both Florida and previous accelerated weathering tests. For monocoat aerospace systems, the new weathering protocol showed less acceleration than for automotive coatings, but was still an improvement over previous accelerated tests and was faster than Florida exposure.     

Skeletal muscle extra-aortic counterpulsation in dogs with dilated cardiomyopathy

Skeletal muscle extra-aortic counterpulsation was performed in seven dogs with dilated cardiomyopathy. A left latissimus dorsi dynamic descending thoracic aortomyoplasty was used as the autologous counterpulsator. Pulse train stimulation in diastole was used to initiate contraction and fibre type transformation. Two of the dogs died within 48 hours of surgery. The device was successfully activated in the five remaining dogs, but in one individual it failed within 48 hours of activation. Serial echocardiographic examinations of dogs in which the device functioned successfully (n = 4) showed trends towards the decrease in the left ventricular systolic internal dimension, left ventricular diastolic internal dimension, E-point to septal separation and left atrial diameter in systole seven to 14 days following the procedure, although these changes failed to persist in the long-term. The results suggest that skeletal muscle for cardiac assistances such as extra-aortic muscle counterpulsation, might be a therapeutic option for dogs with cardiac failure due to dilated cardiomyopathy.