Corrosion and mechanical properties of plasma electrolytic oxidation‐coated AZ80 magnesium alloy

Plasma electrolytic oxidation (PEO) coatings were produced on AZ80 magnesium alloy in a solution containing silicates and phosphates and working at high current densities with short treatment times. The effect of a sealing treatment in boiling water on corrosion and mechanical properties of the coatings were investigated. Moreover, the corrosion mechanism of the samples with and without the sealing treatment was evaluated. The microstructure of the coatings was characterized with scanning electron microscope observation and X‐ray diffraction analysis. The mechanical properties were evaluated with nanoindentation tests and the corrosion resistance was studied by potentiodynamic polarization, electrochemical impedance spectroscopy, and scanning vibrating electrode technique. The results showed that the sealing did not influence the microstructure and the mechanical properties of the samples and instead produced a remarkable increase in the corrosion resistance. The crevice corrosion, present in the sample without the sealing, was avoided with the treatment in boiling water.     

Dynamics of lipid droplets in the endometrium and fatty acids and oxylipins in the uterine lumen,blood, and milk of lactating cows during diestrus

Our objective was to investigate the lipid content of uterus, blood plasma, and milk at early, mid, and late diestrus. Lactating cows (n = 30) had the estrous cycle and ovulation synchronized by administration of exogenous hormones. Cows were blocked by parity and assigned randomly to receive transcervical uterine flushing and biopsy on d 5 (early diestrus), 10 (mid diestrus) or 15 (late diestrus) of the estrous cycle. Flushing and endometrial biopsy were performed in the uterine horn ipsilateral to the corpus luteum. The recovered flushing was used for analyses of lipid composition by liquid chromatography-tandem mass spectrometry and the biopsy was used for investigation of lipid droplet abundance in endometrial cryosections using a neutral lipid fluorescent dye. In addition, blood and milk samples were collected from all cows on d 5, 10, and 15. All blood samples were used to measure the concentration of progesterone in plasma, and all milk samples were used to determine milk composition. Subsamples of blood plasma and milk were also used to evaluate the composition of fatty acids and oxylipins using the same methodology used for uterine flushing samples. The abundance of lipid droplets in the endometrium increased 1.9-fold from d 5 to 10, and 2-fold from d 10 to 15. Concentration of long-chain fatty acids and oxylipins in uterine flushing were, on average, 2.2 and 2.5 times greater in samples collected on d 15 compared with those collected on d 5 and 10. These differences were not observed in blood and milk, suggesting that accumulation of fatty acids and oxylipins in the uterus is regulated locally. In addition to concentration, the profile of individual fatty acids and oxylipins in uterine lumen changed substantially during diestrus. The main categories with increased abundance at late diestrus were mono- and polyunsaturated fatty acids, and oxylipins derived from arachidonic acid, dihomo-γ-linolenic acid, and docosahexaenoic acid. In conclusion, fatty acids and oxylipins accumulate in the uterine lumen during diestrus and might work as a mechanism to supply these lipids to the developing conceptus at late diestrus, when the onset of elongation occurs and substantial synthesis of biomass and cell signaling by lipid mediators are required.     

Use of cryogenic machining to improve the adhesion of sphene bioceramic coatings on titanium substrates for dental and orthopaedic applications

Rods of commercially pure titanium were machined using standard oil-based emulsion and cryogenic cooling, and were then coated with sphene (CaTiSiO₅) bioceramic by spray coating using an automatic airbrush. The sphene bioceramic was synthesized in-situ starting from a suspension of polysiloxane that used as SiO₂ precursor, CaCO₃ and TiO₂ nanoparticles. The suspension was deposited on the machined substrates, which were heat treated up to 950?°C in order to promote the formation of sphene ceramic. The produced coated prototypes were characterized to evaluate the effect of the machining conditions on surface roughness and microstructure of the substrate, and thereby their effect on coating adhesion. Nanoindentation tests were employed to determine the hardness and elastic modulus of the coating through its thickness. Results showed that the reduced amount of defects on the surface of the cryo-machined substrates, contributed to increase the hardness, elastic modulus and adhesion strength of the coating-substrate interfaces compared to standard machined samples, therefore improving adhesion of the coating to the underlying substrate.     

Plant Growth Promotion Function of Bacillus sp. Strains Isolated from Salt-Pan Rhizosphere and Their Biocontrol Potential against Macrophomina phaseolina

In recent decades, intensive crop management has involved excessive use of pesticides or fertilizers, compromising environmental integrity and public health. Accordingly, there has been worldwide pressure to find an eco-friendly and safe strategy to ensure agricultural productivity. Among alternative approaches, Plant Growth-Promoting (PGP) rhizobacteria are receiving increasing attention as suitable biocontrol agents against agricultural pests. In the present study, 22 spore-forming bacteria were selected among a salt-pan rhizobacteria collection for their PGP traits and their antagonistic activity against the plant pathogen fungus Macrophomina phaseolina. Based on the higher antifungal activity, strain RHFS10, identified as Bacillus vallismortis, was further examined and cell-free supernatant assays, column purification, and tandem mass spectrometry were employed to purify and preliminarily identify the antifungal metabolites. Interestingly, the minimum inhibitory concentration assessed for the fractions active against M. phaseolina was 10 times lower and more stable than the one estimated for the commercial fungicide pentachloronitrobenzene. These results suggest the use of B. vallismortis strain RHFS10 as a potential plant growth-promoting rhizobacteria as an alternative to chemical pesticides to efficiently control the phytopathogenic fungus M. phaseolina.     

A Case of Double Standard: Sex Differences in Multiple Sclerosis Risk Factors

Multiple sclerosis is a complex, multifactorial, dysimmune disease prevalent in women. Its etiopathogenesis is extremely intricate, since each risk factor behaves as a variable that is interconnected with others. In order to understand these interactions, sex must be considered as a determining element, either in a protective or pathological sense, and not as one of many variables. In particular, sex seems to highly influence immune response at chromosomal, epigenetic, and hormonal levels. Environmental and genetic risk factors cannot be considered without sex, since sex-based immunological differences deeply affect disease onset, course, and prognosis. Understanding the mechanisms underlying sex-based differences is necessary in order to develop a more effective and personalized therapeutic approach.     

Corrosion resistance of low‐nickel duplex stainless steel rebars

The use of stainless steel bars in reinforced concrete structures may be an effective method to prevent corrosion in aggressive environments where high amounts of chlorides may penetrate in the concrete cover. For an estimation of the service life of structures where stainless steel bars are used, the chloride threshold for these rebars should be defined, and the influence of chemical composition and metallurgical factors that may affect the corrosion resistance (strengthening, welding, etc.) should be assessed. To reduce the cost of stainless steel reinforcement, duplex stainless steels with low nickel content have been recently proposed as an alternative to traditional austenitic steels, even though, few results are available regarding their corrosion performance in chloride contaminated concrete. This paper deals with the corrosion resistance of low‐nickel duplex stainless steel rebars (1.4362 and 1.4162) as a function of the chloride content. Comparison is made with traditional austenitic steels. An attempt to define a chloride threshold for the different stainless steels is made by comparing the results of several test procedures both in concrete and in solution.     

Corrosion assessment and restoration strategies of reinforced concrete buildings of the cultural heritage

Since the beginning of the 20th century, in Italy as in many other countries, reinforced concrete (RC) became one of the most popular construction materials and it was used for buildings, monuments, infrastructures, etc. Several of these structures, although of recent formation, have now been included in the cultural heritage, because of their architectural or social relevance. As a consequence of the typical urban or rural exposure conditions of these buildings, they often suffer damage due to carbonation‐induced corrosion of reinforcement, such as concrete spalling or cracking or rust stains that may affect the serviceability of structures. Furthermore, chloride‐induced corrosion of reinforcement, may also concern buildings exposed to de‐icing salts or marine environments. Due to strict requirements related to the preservation of the original materials and texture, the repair of structures that belong to the cultural heritage cannot rely on the conventional repair technique, based on the replacement of carbonated concrete. Therefore, the conservation of RC buildings of the cultural heritage is a challenge, since it requires the development of specific strategies aimed at finding the best compromise between, on one hand, the restoration of structural safety and the prevention of future damage and, on the other hand, the preservation of the original materials and surfaces. This paper analyses the results of inspections carried out on several buildings, built in Italy throughout the 20th century in different micro‐ and macro‐climates, with the aim of showing their peculiarities with regard to steel corrosion and the selection of restorations strategies.