ANNM: A New Method for Adding Noise Nodes Which are Used Recently in Anonymization Methods in Social Networks

Wireless Personal Communications - One of the main concerns at the time of production or share of information on social networking sites for scientific research and business analysis is privacy....     

The effect of MWNTs concentration and nanofiber orientation on mechanical properties of PAA nanocomposite nanofibrous web

In this research, nanocomposite nanofibrous webs of poly(acrylic acid) (PAA)/multi‐walled carbon nanotubes (MWNTs) were obtained via electrospinning. The effect of MWNTs concentration on the morphology and mechanical properties of PAA/MWNTs nanofibers was investigated by changing the MWNTs content from 0 to 5 wt%. The results showed that average diameter of nanofibers increased with increasing the MWNTs concentration and presence of MWNTs led to the enhancement of mechanical properties. Also, the results revealed that the strength, modulus, and elongation at break of samples increased 3.22, 2.70, and 4.27 fold, respectively, after adding 3 wt% of MWNTs. In addition, the effect of rotating speed of collector on the orientation of PAA nanofibers and its effect on mechanical properties was investigated. Scanning electron microscopy (SEM) studies demonstrated that the degree of nanofibers orientation increased with the augmentation of drum speed to 25 rps. Moreover, the average nanofibers diameter decreased with the increase of drum speed. Improvement of nanofiber orientation resulted in superior mechanical properties that is, higher strength and modulus of aligned nanofiber layers were obtained in comparison to nonaligned layers (12.6 and 26.6 fold, respectively). POLYM. COMPOS., 37:3149–3159, 2016. © 2015 Society of Plastics Engineers     

Colour and ergonomics: On the selection of a “colour of the year”

The key role of colour in ergonomics has been emphasized by a number of researchers and design professionals. Although several research studies have been published regarding the use of colour in ergonomics, there are still some areas that need to be considered. The issue of deciding a “colour of the year” is an example, which represents a new challenge for researchers in the field of ergonomics. This is of particular interest considering the fact that the nature of research on the selection of a “colour of the year” is generally based on user experience. This paper argues that ergonomics should play a more prominent role in this field to ensure better user experience and performance. This paper highlights specific areas that need further study and development.     

Synthesis and characterization of poly(ethylene tetrasulfide)/graphene oxide nanocomposites by in situ polymerization method

Poly(ethylene tetrasulfide) (PSP) is synthesized via interfacial polycondensation of 1,2 dichloroethane and sodium tetrasulfide, in the presence of graphene oxide (GO). This process resulted in homogeneously dispersed PSP/GO nanocomposites. Nanocomposites of 0.3 and 0.5?wt% of GO are synthesized and their morphology, chemical characteristics behavior are studied employing field emission scanning electron microscopy, Fourier transform infrared spectroscopy and X-ray diffraction techniques. Thermal characterization of composites is performed by differential scanning calorimetry and thermogravimetry analysis. Results indicate that the addition of only small amounts (0.5?wt%) of well-dispersed GO can increase the melting point more than 16°C resulting in better thermal properties for the composite. The solubility of nanocomposite is also studied and results show that the solubility depends on solvent concentration in addition to reinforcement (GO) deals.     

Effect of nano-sized calcium carbonate on cure kinetics and properties of polyester/epoxy blend powder coatings

Today's strict environmental laws pose significant challenges for coating's formulators to look for eco-friendly products. Powder coatings, particularly polyester/epoxy blends have demonstrated their ability as alternatives to traditional solvent-borne coatings. Recently, the use of nanoparticles such as nano-CaCO₃ (nCaCO₃) has been suggested as a beneficial strategy towards powder coating application with improved properties. Here, we study the effect of nCaCO₃ on morphology, cure behavior, adhesion and hardness of polyester/epoxy systems. The nanoparticles shape, size and dispersion state were investigated through X-ray diffraction (XRD), transmission electron microscopy (TEM) and scanning electron microscopy (SEM) methods. Furthermore, isothermal cure characterization of the neat and filled systems was performed using a torque rheometer. The most important finding based on the rheological studies was the catalytic effect of nCaCO₃ on cure reaction of polyester/epoxy, leading to the shorter curing time. Moreover, the kinetic analyses of rheograms revealed a marked decrease in the activation energy of the cure process upon raising nCaCO₃ content. Interestingly, pull-off adhesion and hardness tests showed that the hardness and adhesion strength were dramatically increased by the addition of nCaCO₃ into the polyester/epoxy system compared to pure blend resin. Therefore, considering the strong competition in powder coating market, the use of nCaCO₃ as a commercial and inexpensive nanofiller is necessary not only to reduce the dwell time which has benefits in terms of the energy consumption and economics, but also to improve the performance of final polyester/epoxy coating.     

Using Taguchi method to determine optimum process conditions for flue gas desulfurization through an amine scrubber

This study was done to determine the optimum process conditions for absorption of sulfur dioxide in a mixture of flue gases. Using a selective amine-based absorber; a high amount of SO₂ was absorbed in the scrubbing process. The process was designed to reduce the amount of sulfur dioxide. The pilot plant was designed and set up in the Research Center of Petroleum University of Technology, containing absorption and desorption stages. This paper reports an investigation of the effect and optimization of parameters that improve the efficiency of the whole process. The experiments were conducted under varying levels of desorption temperature, pH of the absorber solution, concentration of SO₂ inlet gas, and flow rate of the absorbing solution. Using Taguchi experimental design method, the optimum conditions were identified for the absorption process. An efficiency of more than 99 % could be obtained by varying the parameters in which all the released SO₂ gas was absorbed from the inlet flue gas; an achievement that is much favorable for industrial purposes.     

Parallel variable neighborhood search for solving fuzzy multi-objective dynamic facility layout problem

In spite of the classic approaches of solution of dynamic facility layout problem, which only material handling and rearrangement costs are considered as objective function, these problems are the multi-objective problems. In this paper, a mixed integer linear programming formulation is presented for multi-objective dynamic facility layout problem concerning flexible bay structure. In addition, three current objectives in dynamic facility layout problems including minimizing material handling and rearrangement costs, maximizing adjacency rate, and minimizing shape ratio difference have been considered. Also, for solving this problem, two methods including the GAMS software and proposed parallel variable neighborhood search (PVNS) algorithm are used. So, it is worth mentioning that four test problems are solved by them, and the results show that the proposed PVNS algorithm is more efficient than the GAMS software.     

An intelligent hybrid meta-heuristic for solving a case of no-wait two-stage flexible flow shop scheduling problem with unrelated parallel machines

This paper addresses the problem of no-wait two-stage flexible flow shop scheduling problem (NWTSFFSSP) considering unrelated parallel machines, sequence-dependent setup times, probable reworks and different ready times to actualize the problem. The performance measure used in this study is minimizing maximum completion time (makespan). Because of the complexity of addressed problem, we propose a novel intelligent hybrid algorithm [called hybrid algorithm (HA)] based on imperialist competitive algorithm (ICA) which are combined with simulated annealing (SA), variable neighborhood search (VNS) and genetic algorithm (GA) for solving the mentioned problem. The hybridization is carried out to overcome some existing drawbacks of each of these three algorithms and also for increasing the capability of ICA. To achieve reliable results, Taguchi approach is used to define robust parameters' values for our proposed algorithm. A simulation model is developed to study the performance of our proposed algorithm against ICA, SA, VNS, GA and ant colony optimization (ACO). The results of the study reveal the relative superiority of HA studied. In addition, potential areas for further researches are highlighted.