Optical and electrical properties and phonon drag effect in low temperature TEP measurements of AgSbSe2 thin films

Polycrystalline thin films of silver antimony selenide have been deposited using a reactive evaporation technique onto an ultrasonically cleaned glass substrate at a vacuum of 10-5 torr. The preparative parameters, like substrate temperature and incident fluxes, have been properly controlled in order to get stoichiometric, good quality and reproducible thin film samples. The samples are characterized by XRD, SEM, AFM and a UV-vis-NIR spectrophotometer. The prepared sample is found to be polycrystalline in nature. From the XRD pattern, the average particle size and lattice constant are calculated. The dislocation density, strain and number of crystallites per unit area are evaluated using the average particle size. The dependence of the electrical conductivity on the temperature has also been studied and the prepared AgSbSe2 samples are semiconducting in nature. The AgSbSe2 thin films exhibited an indirect allowed optical transition with a band gap of 0.64 eV. The compound exhibits promising thermoelectric properties, a large Seebeck coefficient of 30 mV/K at 48 K due to strong phonon electron interaction. It shows a strong temperature dependence on thermoelectric properties, including the inversion of a dominant carrier type from p to n over a low temperature range 9-300 K, which is explained on the basis of a phonon drag effect.     

The role of rotation speed on intermetallic compounds formation and mechanical behavior of friction stir welded brass/aluminum 1050 couple

In this paper, the intermetallic compounds formation during dissimilar friction stir welding of brass to aluminum 1050 and its effect on the mechanical behavior of joint were studied. Scanning Electron Microscopy (SEM), Energy dispersive spectroscopy analysis (EDS) and X-ray Diffraction analysis were used to characterize intermetallics. In addition, tensile tests and microhardness measurements were performed to evaluate mechanical properties. The results showed that utilizing rotation speeds higher than 400 rpm leads to gradual formation of intermetallic compounds in the stir zone and at the interface. CuAl₂ is the dominant compound in the composite structure of the stir zone, whereas four intermetallic bands are detected at the interface. From aluminum to brass, two middle layers were formed. Then, CuAl₂, Cu₉Al₄ and CuZn were detected. The increase in rotation speed is accompanied by thickening and development of interfacial intermetallic compounds. The optimum rotation speed of 450 rpm yielded a narrow interfacial intermetallic compound and a lamellar composite structure within the stir zone which enhances the tensile strength of the weld. On the other hand, further increase of rotation speed lowers the tensile strength of the weld which is accompanied by disappearance of lamellar composite structure, increment of weld defects and thickening of interfacial intermetallic layer.     

Graft copolymerization with a new class of acidic peroxo salts as initiator. V. Grafting of methyl methacrylate onto jute fiber using potassium monopersulfate catalyzed by Fe(II)

Graft copolymerization of methyl methacrylate (MMA) onto jute fibers was studied in an aqueous solution using a new class of acidic peroxo salt, potassium monopersulfate, as initiator, under the catalytic influence of Fe(II) under nitrogen atmosphere. The grafting reaction was influenced by the reaction time, temperature, and concentrations of monomer, initiator, and jute fibers. The grafting reactions have also been studied in the presence of various salts and solvents. The maximum grafting percent (385.4%) has been observed at 35°C for the concentration of monomer (1.4082M), initiator (12.9 × 10^?3M), catalyst (2.5 × 10^?4M), and solvent (acetic acid) composition of (40:60) for a reaction time of 6 h. From the experimental results a suitable mechanism for the graft initiation and termination has been put forth. The graft copolymers have been characterized, and their improved properties such as tensil strength tested.     

Grafting of vinyl monomers onto silk fibers: Trivalent-manganese-initiated graft copolymerization of acrylamide onto silk fibers

Graft copolymerization of acrylamide (AM) onto silk fibers, using Mn(III)–sulphate as initiator, has been investigated, in aqueous sulphuric acid in the temperature range of 30–55°C. Grafting reaction has been studied by varying the concentration of monomer, Mn(III), sulphuric acid, temperature, and also with the modified silk. The graft yield increases significantly with increase of monomer concentrations to the extent of 0.85M, after which the rate falls. With increase in Mn(III) concentration and H⁺ ion concentration the graft yield increases, but after an optimum concentration a depression in the graft yield is noticed. The rate of the reaction is temperature-dependent; with increase of temperature the graft-on increases. Among the solvent composition studied a solvent/water mixture containing 10% of the solvent seems to constitute the most favorable medium for grafting, and a further increase of solvent composition decreases the graft yield. The effect of various additives such as transition metal salts, aromatic and heterocyclic amines on grafting reaction has been studied. A suitable mechanism for grafting has been proposed. Finally physical characterization such as thermal analysis (TGA) of the grafted samples has been carried out in order to ensure grafting and to study the change in the properties of the fibers.     

Structural Studies and Valence Band Splitting Parameters in Ordered Vacancy Compound AgGa7Se12

The threefold absorption in the fundamental absorption region of the ternary chalcopyrite AgGa₇Se₁₂, an ordered defect compound of AgGaSe₂, is analyzed to elucidate the three closely spaced band gaps in its valence band due to the lifting of degeneracy of the Γ₁₅ level. Hopfield’s quasi cubic model is employed to extract the crystal-field and spin–orbit splitting parameters and the linear hybridisation of orbitals model for evaluating the percentage contribution of Ag d-orbital and Ga and Se p-orbitals to the p–d hybridization of orbitals. The observed optical properties are correlated with the structural parameters like deformation parameter, anion displacement and anion–cation bond lengths that are deduced from X-ray diffraction data. The compound films for the studies are prepared by a modified form of Gunther’s three temperature technique and the compositional analysis was done by energy dispersive analysis of X-rays. X-ray photoelectron spectroscopy confirms the compound formation while atomic force microscopic technique was used for surface morphological analysis. The electrical resistivity of these n-type semi-conducting films is assessed to be ~5 Ωm and the films are found to be photosensitive.     

Ann Algorithm for Incremental Machine Learning: Heuristics in a Bayesian Technique

A neural network formulation of a leader independent, nonparametric, Bayes' risk consistent algorithm [8] for incremental machine learning is presented. Implementation of the computing algorithm on a medical data base is compared with some recently reported ANN algorithms for classification/clustering. Importance of the approach is highlighted.     

壳牌公司的天然气、炼厂气和液体的处理技术

一般认为，气体及液体处理技术已经很成熟，但多来源且更复杂组成的进料气体及更严格的环保要求和产品规格又不断推动着技术的进步。本文介绍了壳牌所开发使用的处理技术及近两年内的一些最新发展。含硫化氢气体处理技术包括传统的液相吸收、固定床吸收、气相的催化转换反应以及生物处理技术。壳牌公司可根据进料气体的情况和最终产品的要求，对整个工艺整合，并给出最优化的解决方案，以达到更环保，可靠性更高且更节省投资的目的。     

Radiation-Induced Senescence Reprograms Secretory and Metabolic Pathways in Colon Cancer HCT-116 Cells

Understanding the global metabolic changes during the senescence of tumor cells can have implications for developing effective anti-cancer treatment strategies. Ionizing radiation (IR) was used to induce senescence in a human colon cancer cell line HCT-116 to examine secretome and metabolome profiles. Control proliferating and senescent cancer cells (SCC) exhibited distinct morphological differences and expression of senescent markers. Enhanced secretion of pro-inflammatory chemokines and IL-1, anti-inflammatory IL-27, and TGF-β1 was observed in SCC. Significantly reduced levels of VEGF-A indicated anti-angiogenic activities of SCC. Elevated levels of tissue inhibitors of matrix metalloproteinases from SCC support the maintenance of the extracellular matrix. Adenylate and guanylate energy charge levels and redox components NAD and NADP and glutathione were maintained at near optimal levels indicating the viability of SCC. Significant accumulation of pyruvate, lactate, and suppression of the TCA cycle in SCC indicated aerobic glycolysis as the predominant energy source for SCC. Levels of several key amino acids decreased significantly, suggesting augmented utilization for protein synthesis and for use as intermediates for energy metabolism in SCC. These observations may provide a better understanding of cellular senescence basic mechanisms in tumor tissues and provide opportunities to improve cancer treatment.     

An improved auto-tuning scheme for PI controllers

Ziegler-Nichols tuned PI and PID controllers are usually found to provide poor performances for high-order and nonlinear systems. In this study, an improved auto-tuning scheme is presented for Ziegler-Nichols tuned PI controllers (ZNPICs). With a view to improving the transient response, the proportional and integral gains of the proposed controller are continuously modified based on the current process trend. The proposed controller is tested for a number of high-order linear and nonlinear dead-time processes under both set-point change and load disturbance. It exhibits significantly improved performance compared to ZNPIC, and Refined Ziegler-Nichols tuned PI controller (RZNPIC). Robustness of the proposed scheme is established by varying the controller parameters as well as the dead-time of the process under control.