A circuit-level methodology for leakage power reduction of high-efficient compressors in 22-nm CMOS technology

Analog Integrated Circuits and Signal Processing - A new circuit-level methodology called input controlled leakage restrainer transistor (ICLRT) compatible with single threshold CMOS technology is...     

Characterization,in vitro bioactivity and biological studies of sol-gel-derived TiO2 substituted 58S bioactive glass

Bioactive glasses (BGs) have been used for bone formation and bone repair processes in recent years. This study investigated the titanium substitution effect on 58S BGs (Ti-BGs) 60SiO₂-(36 − X)CaO-4P₂O₅-XTiO₂ (X = 0, 3, and 5 mol.%) prepared by the sol-gel technique, and the main goal was to find the optimum amount of titanium in Ti-BGs. Synthesized BGs, which were investigated after immersion in simulated body fluid (SBF), were tested by X-ray diffraction (XRD) analysis, Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy. Moreover alkaline phosphate (ALP) activity, 3-(4,5dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay, and antibacterial studies were employed to investigate the biological properties of Ti-BGs. According to the FTIR and XRD test results, hydroxyapatite (HA) formation on Ti-BGs surfaces was confirmed. Meanwhile, the presence of 5 mol.% compared to 3 mol.% increased the HA grain distribution and their size on the Ti-BGs surface. Additionally, MTT and ALP results confirmed that the optimal amount of titanium substitution in BG was 5 mol.%. Since 5 mol.% Ti incorporated BG (BG-5) had the highest biocompatibility level, antibacterial properties, maximum cell proliferation, and ALP activity among the synthesized Ti-BGs, it is presented as the best candidate for further in vivo investigations.     

Toward a better understanding of multifunctional cement-based materials: The impact of graphite nanoplatelets (GNPs)

The impact of graphite nanoplatelets (GNPs) on the physical and mechanical properties of cementitious nanocomposites was investigated. A market-available premixed mortar was modified with 0.01% by weight of cement of commercial GNPs characterized by two distinctively different aspect ratios.The rheological behavior of the GNP-modified fresh admixtures was thoroughly evaluated. Hardened cementitious nanocomposites were investigated in terms of density, microstructure (Scanning Electron Microscopy, SEM and micro–Computed Tomography, μ-CT), mechanical properties (three-point bending and compression tests), and physical properties (electrochemical impedance spectroscopy, EIS and thermal conductivity measurements). At 28 days, all GNP-modified mortars showed about 12% increased density. Mortars reinforced with high aspect ratio GNPs exhibited the highest compressive and flexural strength: about 14% and 4% improvements compared to control sample, respectively. Conversely, low aspect ratio GNPs led to cementitious nanocomposites characterized by 36% decreased electrical resistivity combined with 60% increased thermal conductivity with respect to the control sample.     

Effect of ultrasonication treatment and fermentation by probiotic Lactobacillus plantarum strains on goat milk bioactivities

In the present research, the effects of continuous ultrasound treatment (100 W, 30 kHz; 0%, 30%, 60% and 90% amplitudes, 15 min) and fermentation process (37°C, 24 h) on the growth of Lactobacillus plantarum LP3 and LU5 strains and bioactive properties (peptide content, α-amylase and α-glucosidase inhibition, anticancer and antioxidant activities and exopolysaccharide content) of goat milk were investigated. According to our results, the ultrasonication of milk up to 60% amplitude promoted the growth of Lactobacillus strains and enhanced the bioactive properties compared with control during fermentation, while, the ultrasonication at 90% amplitude had negative effects on the mentioned parameters. Exopolysaccharide content, α-amylase inhibition, α-glucosidase inhibition, antioxidant activity and anticancer activity of treated samples at 60% amplitude at the end of fermentation in comparison to its beginning were increased 18.09, 12.79, 12.44, 9.4 and 1.92 folds, respectively. Also, the increase of assayed characteristics was found strain-dependent, so that L. plantarum LP3 was more effective than LU5 strain.     

A comparative study of landslide susceptibility maps produced using support vector machine with different kernel functions and entropy data mining models in China

Bulletin of Engineering Geology and the Environment - The main objective of the current study is to apply a random forest (RF) data-driven model and prioritization of landslide conditioning factors...     

Numerical evaluation and the effects of geometrical and operational parameters on thermal performance of the shell and double coil tube heat exchanger

Heat exchangers are extensively used in various industries. In this study, the impact of geometric and flow parameters on the performance of a shell and double helical coil heat exchanger is studied numerically. The investigated geometric parameters include external coil pitch, internal coil pitch, internal coil diameter, and coil diameter. The influences of considered geometrical parameters are analyzed on the output temperature of the hot and cold fluid, convective heat transfer coefficient, pressure drop, and average Nusselt number. Water is considered as working fluid in both shell and tube. As an innovation, double helical coils are used instead of one in the heat exchanger. To compare the obtained results accurately, in each section, the heat transfer area (coil outer surface) is kept constant in all models. The results show that the geometrical parameters of double helical coils significantly affect the heat transfer rate.     

Investigating the wicking behavior of micro/nanofibrous core-sheath PET–PAN yarn modified by dimethyl 5-sodium sulfoisophthalate

The present research aims at imparting an improved wicking ability to the recycled multifilament yarns by wrapping composite nanofibers to attain an efficient material for filtration purposes. Therefore, polyacrylonitrile nanofibers containing dimethyl 5-sodium sulfoisophthalate nanoparticles were wrapped around the recycled poly(ethylene terephthalate) yarn by means of a novel electrospinning technique. Several tests were performed to investigate the parameters affecting wicking rise and moisture regain of the samples. Taguchi method was used in two separate designs (with or without nanoparticles). Some factors such as polymer solution concentration, mass ratio of nanoparticles, take-up rate, and number of filaments were considered as the variable factors while yarn wicking rate and moisture regain were the response factors. It was found that the hydrophilic nature of nanoparticles together with the ultrafine structure of nanofibers provide yarns with enhanced wicking properties. Although solution concentration is the predominant factor in wicking rate of the yarns containing nanoparticles, the most effective factor in wicking rise and moisture regain for other cases is the number of filaments. The mechanism of nanoparticle effect on fluidic jet during electrospinning process is explained by theory of nanofluids stability which has never been validated experimentally in previous research studies. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 48185.     

Using the red-near infrared spectral to estimate ground cover based on vegetative indices

Rapid and accurate estimation of Ground Cover (GC) at regional and global scales for agricultural management application is only possible by using remote sensing (RS). In this study, two Vegetation Indices (VIs) including the Perpendicular Vegetation Index (PVI) and Normalized Difference Vegetation Index (NDVI) were used for estimating GC. Since the parameters of the bare soil line have an important role in calculating GC based on PVI, this line was extracted based on the red-NIRmin (minimum near infrared) method with different intervals (0.0001, 0.0005, and 0.0010). In addition to traditional statistics such as Root Mean Square Error (RMSE), the sensitivity analysis (S) was also used to sharpen the accuracy of the models' estimations. The results indicated that the PVI-based method, in contrast to the NDVI-based approach, had a better performance in estimating GC of wheat. The highest correlation between the observed GC and the estimated GC based on PVI method was achieved in interval length of 0.0005 (R2 = 0.91) with RMSE equal to 8.82. This regression line (GCEST = -3.47 + 0.96 GCOBS) was not significantly different from the 1:1 line. As expected, the best estimation was achieved when the sensitivity of estimated GC based on PVI (length of the interval: 0.0005) was almost constant and low compared to the other models.     

Production of calcium nitrate crystals via membrane distillation crystallization using polyvinylidene fluoride/sorbitan trioleate membranes

As an alternative to the energy-intensive evaporation-crystallization method, membrane distillation crystallization (MDC) was applied for the first time to obtain calcium nitrate crystals from its aqueous solution. Calcium nitrate solution was obtained through the reaction between calcium carbonate and nitric acid, and then it was concentrated in the membrane distillation (MD) process and further crystallized. The MD step was conducted using hydrophobic polyvinylidene fluoride (PVDF)/sorbitan trioleate (Span 85) membranes. Span 85 was incorporated into the membrane structure in various concentrations to improve the hydrophobicity of membranes, and the resultant membranes were characterized via different methods. In addition, the resultant calcium nitrate crystals were characterized by X-ray fluorescence (XRF) spectroscopy. The MDC results showed that the optimum amount of Span 85 in the polymeric solution was 4%, which led to the formation of a membrane with higher porosity (67.2%) and water contact angle (95.7°) compared to the neat PVDF membrane. The mentioned membrane exhibited the highest water flux in the MD process compared to the other membranes, and also it produced the highest amount of crystals due to its remarkably better performance in the MD step in terms of feed concentration.     

Effect of Co addition on microstructural and mechanical properties of WC–B4C–SiC composites

In this study, the effect of Co addition on microstructural and mechanical properties of WC-B₄C–SiC composites sintered by spark plasma sintering (SPS) method was investigated. For this purpose, three batches of WC-B₄C–SiC with different contents of Co (10 vol%, 15 vol%, and 20 Vol %) were sintered at 1400 °C. The results of X-ray diffraction (XRD) analysis of the samples indicated the formation of W₂B₅, W₃CoB₃ as well as the remained C phases and unreacted SiC phase. It was observed that by increasing the Co content, the amount of W₂B₅ phase reduces and W₃CoB₃ and C contents increase. Therefore, W₂B₅ peaks were not detected in the sample containing 20vol% Co. Relative density values above 97% were obtained for all the composites. However, a decrease was observed in relative density by increasing the Co content in the composites. The highest flexural strength (510 ± 42 MPa), fracture toughness (10.34 ± 0.82 MPa m^1/2), and hardness (20.63 ± 0.75 GPa) were also obtained for the sample containing 10vol% Co compared to the other samples. In addition, Transgranular fracture of SiC as well as pulling out of W₃CoB₃ and W₂B₅ particles were observed in the fracture surface micrographs of the samples. The presence of micro-cracks in the SiC grains, fracture of W₃CoB₃ grains, and crack deflection was reported as dominant toughening mechanisms.