Trapped-energy flexural mode filter

An electromechanical filter using trapped-energy flexural modes in a rectangular plate is proposed. The filter is amenable to fabrication by planar techniques and it can operate in the l.f. range, including the voice band. Bandwidth is easily controllable. A considerable gain in size can be obtained with respect to flexural bar filters.     

Using static suffix array in dynamic application: Case of text compression by longest first substitution

Over the last decade, enhanced suffix arrays (ESA) have replaced suffix trees in many applications. Algorithms based on ESAs require less space, while allowing the same time efficiency as those based on suffix trees. However, this is only true when a suffix structure is used as a static index. Suffix trees can be updated faster than suffix arrays, which is a clear advantage in applications that require dynamic indexing. We show that for some dynamic applications a suffix array and the derived LCP-interval tree can be used in such a way that the actual index updates are not necessary. We demonstrate this in the case of grammar text compression with longest first substitution and provide the source code. The proposed algorithm has O(N²)$O(N^2)$ worst case time complexity but runs in O(N)$O(N)$ time in practice.     

STW resonator with organo-functionalized metallic nanoparticle film for vapor sensing

A 1 GHz surface transverse wave resonator on 36° Y-cut quartz plate coated with organothiol-functionalized gold nanoparticle film has been studied as a chemical gas sensor. Considerable sensitivity of the resonant frequency to vapors of ethanol, methanol, chloroform, and acetic acid has been found. Owing to the high short-term stability of the oscillator built, the detection limit is in the low ppm range. The results qualitatively confirm previous results on the same film type obtained by conductivity measurements. In the present case, the conductivity effect resulting from variable separation of nanoparticles is accompanied with surface-attached mass of the absorbed gas. The film matrix exhibits considerable capacity to absorb large amounts of molecules at high gas concentrations.     

The coupling-of-modes approach to the analysis of STW devices. II

For pt. I see ibid., vol. 44, no. 3, p. 652-7 (1997). The method for analyzing surface transverse wave (STW) devices by using a coupling-of-modes (COM) formalism has been completed, covering the STW electromechanical coupling coefficient (ECC). An ECC analytical formula has been derived by fitting numerical results from STW effective permittivity analysis. The ECC exhibits frequency and mass-loading variation. Using this new result, a satisfactory agreement with available experimental frequency characteristics of STW two-port quartz resonators has been achieved, without the necessity of additional experimental information. In its present form, the method is self-consistent and applicable to arbitrary STW layouts.     

Aetiology and Pathogenesis of Cutaneous Melanoma: Current Concepts and Advances

Melanoma develops from malignant transformations of the pigment-producing melanocytes. If located in the basal layer of the skin epidermis, melanoma is referred to as cutaneous, which is more frequent. However, as melanocytes are be found in the eyes, ears, gastrointestinal tract, genitalia, urinary system, and meninges, cases of mucosal melanoma or other types (e.g., ocular) may occur. The incidence and morbidity of cutaneous melanoma (cM) are constantly increasing worldwide. Australia and New Zealand are world leaders in this regard with a morbidity rate of 54/100,000 and a mortality rate of 5.6/100,000 for 2015. The aim of this review is to consolidate and present the data related to the aetiology and pathogenesis of cutaneous melanoma, thus rendering them easier to understand. In this article we will discuss these problems and the possible impacts on treatment for this disease.     

A coupling-of-modes approach to the analysis of STW devices

The dispersion characteristics of surface transverse waves (STW) on 36° rotated Y-cut quartz have been analyzed numerically. A closed form dispersion relation has been derived and introduced in the equations of the coupling-of-modes (COM) theory to account for the variation of energy trapping with frequency. The transmission and reflection coefficients at the finger edges have been determined from the stopband characteristics. Through the introduction of an electromechanical coupling which varies linearly with the electrode mass loading, quantitative agreement with experimental results on two different types of two-port STW resonators has been achieved, and characteristic features have been explained     

Application of the Cascade-Correlation network to the classification of circularly scanned images

This paper describes an application of the Cascade-Correlation (CC) network to pattern recognition. The pattern recognition task was to simulate an automatic vision inspection system that had to properly classify five different objects. The feature vectors were extracted from 2D images of circularly scanned images and used as inputs for a neural network that was then trained to classify an unknown presented object. The results show that the CC network is viable tool in pattern recognition tasks. It is able to classify partially occluded objects with high accuracy, and to considerably improve classification of noisy images based on simple histogram trimming preprocessing.     

Layer thickness impact on the capacity of poly(urethaneimide) for sorbing toxic gases

The sensitivity of a thick layer (500 nm) of poly(urethaneimide) to toxic gases such as pyridine and hexamethyleneimine was studied by the quartz crystal microbalance method. The resonant frequency was registered by a spectrum analyzer. The successful overcoming of the unfavorable impact of the increased viscous damping, typical for the standard oscillator measurement method, allowed complete understanding of the behavior of a thick polymer layer toward highly pollutant gases. Quantitative information for polymer adsorption capacity and gas diffusivity was extracted. The comparison with our recent results for thinner layers revealed strong dependence on layer thickness for pyridine whereas the corresponding effect with hexamethyleneimine was found much less significant. Intermolecular interactions and the impact of the gas physical adsorption on the polymer matrix properties were shown as the driving parameters for the sensors response. The thickness dependence provides a tool for tuning the sensitivity of a potentially efficient poly(urethaneimide) sensor for pyridine. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44214.     

Dynamic shear piezoelectricity of poly(vinylidene fluoride) thinfilms

The shear wave properties of stretched and polarized PVDF thin films have been studied under application of a high frequency electric field parallel to the film surface. It has been found that the piezoelectric constants d₁₅ and d₂₄ do not act effectively under conditions of thickness resonance, in contrast with their large static values. This result is in severe disagreement with the symmetry predictions and raises the necessity for thorough investigation of the contribution of the amorphous phase as well as the collective behaviour of piezoelectric crystallites     

Theoretical and experimental mass-sensitivity analysis of polymer-coated SAW and STW resonators for gas sensing applications

Polymer-coated surface transverse waves (STW) resonators have recently been successfully studied for organic gas sensing applications. The first results indicate increased absolute and even relative sensitivity as compared to similar resonators with surface acoustic waves (SAW). However, the gain in sensitivity is accompanied by the adverse effect of an increased attenuation and the advantage frame is difficult to establish quantitatively. In this paper, a new set of experimental samples with Parylene C-coated quartz substrates are studied. The samples are matched in frequency and wavelength. The results are compared and the obtained features explained using available theoretical algorithms for analyzing layered SAW and Love configurations, and a recently developed STW algorithm. The approximate limits of advantageous applicability of the STW resonator gas sensors are discussed.