应用于微电网的新型潮流控制器

电力弹簧在接有新能源的微电网中能够有效稳定母线电压,为关键负荷提供稳定的供能,根据这个特性,为了降低新能源的波动性对电网造成的冲击,提出一种新型的潮流控制器,由电力弹簧和基于电力电子器件的可调节变压器组成,可调节变压器嵌入在在电网的降压变压器中,使非关键负荷由新能源供能,关键负荷由电网供能,当新能源供能充足时,新型潮流控制器调节潮流,使非关键负荷和关键负荷均由新能源供能,因此降低负荷对电网的需求。介绍潮流控制器的原理和实现方法,实验结果证明了方案的正确性。     

Hydrophobic Cross-Linked Poly(dimethylsiloxane)-Based Sorbents for Oil Spill Applications

With the increase of industrialization and urbanization, humankind faces massive oil-based pollution due to tanker accidents, human error, and natural disasters. For this, hydrophobic sorbents are fabricated and their applications for the removal of oil from polluted water sources are investigated. These hydrophobic sorbents are prepared by the condensation reaction of poly(dimethylsiloxane) and tris[3-(trimethoxysilyl)propyl]isocyanurate cross-linker via bulk polymerization. The obtained sorbents exhibit high oil sorption capacity, fast absorption–desorption kinetics, and great reusability. Moreover, they can selectively absorb oil from the water surface, thus making them practical for water clean-up applications.     

Modeling uranium biosorption by Cystoseira sp. and application studies

The aim of the present work was to determine the applicability of raw and modified brown macroalga Cystoseira sp. as a biosorbent material for the sorption of uranium ions from aqueous solutions. Equilibrium of uranium biosorption was analyzed under isotherm models and thermodynamic parameters of the process. Recovery of uranium from acidic mine wastewater was also applied. The mechanism of biosorption was discussed considering experimental data and theoretical models. The bioremoval efficiency of modified biomass was higher than raw Cystoseira sp. and the theoretical biosorption capacity of modified biosorbent was calculated to be 468.01 mg U/g.     

Proposals for creative uses of computer graphics in architectural design

Computer graphics are used by architects mainly for presentation purposes. However, the rapid pace of the development of computer technology enables more creative applications. This research proposes the use of dynamically simulated computer graphics as an evaluation tool for architectural design. Since buildings are living entities, whole life cycles of buildings should be dynamically simulated in highly visualised virtual environments to evaluate the future performance of prospective designs. Two areas that seem especially promising for near future (evaluation of user-building interaction and visualisation of environmental factors) are mentioned and some proposals are presented for the future use of dynamic simulations in virtual environments.     

Adaptive Modeling of Analog/RF Circuits for Efficient Fault Response Evaluation

In this paper, we propose a methodology for adaptive modeling of analog/RF circuits. This modeling technique is specifically geared towards evaluating the response of a faulty circuit in terms of its specifications and/or measurements. The goal of this modeling approach is to compute important test metrics, such as fail probability, fault coverage, and/or yield coverage of a given measurement under process variations. Once the models for the faulty and fault-free circuit are generated, we can simply use Monte-Carlo sampling (as opposed to Monte-Carlo simulations) to compute these statistical parameters with high accuracy. We use the error budget that is defined in terms of computing the statistical metrics and the position of the threshold(s) to decide how precisely we need to extract the necessary models. Experiments on LNA and Mixer confirm that the proposed techniques can reduce the number of necessary simulations by factor of 7 respectively, in the computation of the fail probability.     

Design of a just-in-time periodic material supply system for the assembly lines and an application in electronics industry

The purpose of the paper is the development of a mathematical model and a heuristic approach where the routes are constructed and the service period is determined for the design of an internal milk-run material supply system. The material supply by this system occurs on a just-in-time basis from a central warehouse to several stations of an assembly line. The objective of the proposed mathematical model is the minimization of the total material handling and inventory holding cost. Besides, the proposed heuristic approach intends to construct routes based on an initial service period value and attempts to improve the solution by considering different period values. The most suitable solution is decided on the basis of the least total material handling and WIP/inventory holding cost. The application of the proposed heuristic in a TV assembly plant demonstrates the utility of it to the real practice.     

Effect of fluoride varnish with added casein phosphopeptide-amorphous calcium phosphate on bond strength to enamel

To investigate the effect of fluoride varnish with added casein phosphopeptide-amorphous calcium phosphate on the shear bond strength (SBS) of two adhesive systems to enamel. Specimens obtained from permanent teeth were randomly distributed among four groups for enamel pretreatment [Control (no treatment, CNT), Duraphat varnish (DV), Clinpro White varnish (CWV), MI Varnish (MIV)], and each group was further divided into two subgroups according to adhesive [Etch&rinse (Adper Single Bond, ASB), self-etch (Clearfil SE Bond, CSE)]. Specimens were stored in distilled water at 37 °C for 24 h. Cylindrical composite specimens (2.3 mm in diameter, 3.0 mm in height) were then bonded to the enamel surfaces. SBS tests were performed and data were analyzed with two-way ANOVA and Tukey’s tests. For both CSE and ASB, SBS values of the CNT groups were significantly higher than those of all the enamel pretreatment groups (p < 0.05). Among the enamel pretreatment groups, SBS values with both adhesive systems were lowest in the MIV groups, followed by CWV and DV groups. In conclusion, pretreatment of enamel surfaces with fluoride-containing varnishes reduced bonding performance of adhesive systems to enamel. MIV appeared to cause greater enamel surface alterations and precipitation, which interfered with adhesive bonding mechanisms.     

Highly soluble perylene dyes: Synthesis, photophysical and electrochemical characterizations

Highly soluble perylene diimide derivatives with symmetrical and unsymmetrical secondary, tertiary alkyl side chains were synthesized and their photophysical properties, redox potentials and thermal stabilities were measured and compared with previously reported 1-pentylhexyl substituted swallow-tailed perylene diimide. Diasteroisomers of the novel, unsymmetrical swallow-tailed substituted perylene diimide compound could not be detected using low temperature NMR spectroscopy. The novel dyes were soluble in a range of organic solvents indicating potential for photo-electronic applications and photocatalytic reactions. Two dyes were not only soluble in organic solvents but also showed solubility in aqueous media as the hydrochloride salt, thus offering potential use in biological applications.     

A goal-programming approach for design of hybrid cellular manufacturing systems in dual resource constrained environments

In this study, a goal-programming model is proposed for the design of hybrid cellular manufacturing (HCM) systems, in a dual resource constrained environment, considering many real-world application issues. The procedure consists of three phases. Following an initial phase involving a Pareto analysis of demand volumes and volatility, a machine-grouping phase is conducted to form manufacturing cells, and a residual functional layout. In this phase, over-assignment of parts to the cells, machine purchasing cost, and loss of functional synergies are attempted to be minimized. Following the formation of cells and the functional layout, a labor allocation phase is carried out by considering worker capabilities and capacities. The total costs of cross-training, hiring, firing and over-assignment of workers to more than one cell are sought to be minimized. An application of the model on real factory data is also provided in order to demonstrate the utility and possible limitations. The industrial problem was solved using professional mathematical programming software.