Computational Fluid Dynamics versus Experiment: An Investigation on Liquid Weeping of Nye Trays

The weeping phenomenon was investigated using some experimental tests and a numerical model. The tests were performed within a 1.22‐m‐diameter pilot‐scale column including two chimney trays and two Nye test trays with an air‐water system. The rates of weeping were measured in the Nye trays with two heights of the weir and a hole area of 5 %. Moreover, the weeping rates in the outlet and inlet halves of the Nye tray and the total weeping rate were calculated. In the next step, an Eulerian‐Eulerian computational fluid dynamics (CFD) technique was used. The results show good agreement between the attained CFD findings and the experimental data.     

Nanogrooved carbon microtubes for wet three‐dimensional printing of conductive composite structures

Recent advances in three‐dimensional (3D) printing have enabled the fabrication of interesting structures which are not achievable using traditional fabrication approaches. The 3D printing of carbon microtube composite inks allows fabrication of conductive structures for practical applications in soft robotics and tissue engineering. However, it is challenging to achieve 3D printed structures from solution‐based composite inks, which requires an additional process to solidify the ink. Here, we introduce a wet 3D printing technique which uses a coagulation bath to fabricate carbon microtube composite structures. We show that through a facile nanogrooving approach which introduces cavitation and channels on carbon microtubes, enhanced interfacial interactions with a chitosan polymer matrix are achieved. Consequently, the mechanical properties of the 3D printed composites improve when nanogrooved carbon microtubes are used, compared to untreated microtubes. We show that by carefully controlling the coagulation bath, extrusion pressure, printing distance and printed line distance, we can 3D print composite lattices which are composed of well‐defined and separated printed lines. The conductive composite 3D structures with highly customised design presented in this work provide a suitable platform for applications ranging from soft robotics to smart tissue engineering scaffolds. © 2019 Society of Chemical Industry     

Microstructural,magnetic, electrical transport and large magnetoresistance properties of La 0.57 Nd 0.1 Sr 0.13 Ag 0.2 MnO 3

This report presents the structural, magnetoresistance (MR) and magneto-electrical properties of Ag substituted La0.57Nd0.1Sr0.13Ag0.2MnO3 compound synthesized by solid state reaction method. To...     

Measuring research performance of Iraqi universities using Scopus data

Scientometrics - This study investigates the research performance of the Iraqi public and private universities using the Scopus citation database. The investigation consists of three stages. The...     

Robust and accurate regression-based techniques for period inference in real-time systems

Real-Time Systems - With the growth in complexity of real-time embedded systems, there is an increasing need for tools and techniques to understand and compare the observed runtime behavior of a...     

Unexploited Thapsia garganica,Orlaya maritima,and Retama raetam Seeds: Potential Sources of Unsaturated Fatty Acid and Natural Antioxidants

Total lipid contents, fatty acid compositions, phenolic profiles and antioxidants activities of seeds from Thapsia garganica, Orlaya maritima, and Retama raetam were investigated. The oil values were more than 26 %, except seeds of R. raetam (ca. 3 %). Unsaturated fatty acids accounted for the majority of the fatty acids (more than 75 %). Oleic and linoleic acid were the predominant fatty acids. Total phenolic compounds (24–104 mg GAE g^?1 DR), total flavonoids (4–102 mg QE g^?1g DR), total tannins (28–85 mg GAE g^?1 DR) and condensed tannins (0.62–131 mg CE g^?1 DR) were also determined. The antioxidant activities using different assays were evaluated. The predominant detected classes were the phenolic acids (42–85 %) and the flavonoids (11–48 %). The major phenolic acids were caffeic, trans‐4‐hydroxy‐3‐methoxycinnamic, p‐coumaric, and gallic acid. The predominant flavonoids were quercetin, luteolin, naringin, apigenin, and kaempferol. This study brings attention to the medicinal importance of these species as a source of oil and antioxidant molecules.     

A new interval diagnosis method: Application to the spacecraft rendezvous phase of the Mars sample return mission

This paper presents a new optimized interval principal component analysis applied to detect and isolate actuators faults of an autonomous spacecraft involved in the rendezvous phase of the Mars sample return mission. Based on the exploitation of various arithmetic and interval analysis properties, the new interval model is built by solving the interval eigenpairs problem via a resolution of a parametric linear programming problem. The detection and isolation phases are performed by extending the classic methods to interval-valued data. The proposed method is applied to detect and isolate actuators faults that can occur on the spacecraft's thrusters. Based on data provided by a “high fidelity” industrial simulator developed by Thales Alenia Space, the obtained results proved the effectiveness of the proposed interval fault diagnosis method on detecting and isolating thrusters' faults.     

The induced damage in the hepatopancreas of Orchestia species after exposure to a mixture of Cu/Zn—An ultrastructural study

The hepatopancreas of crustaceans species has been recognized as an essential target organ to assess trace elements' effects. Due to its dynamic and capability of detoxifying trace metal, this organ often indicates distinct pathological disturbances. In the present work, we intend to evaluate the bioaccumulation of trace metal in three Orchestia species (Orchestia montagui, Orchestia gammarellus, and Orchestia mediterranea) living in symmetry in the banks of Bizerte lagoon (37°13′8″N 09°55′1″E) after their exposure during 14 days to a mixture of copper and zinc, and to highlight the effect of these metals on their hepatopancreas ultrastructure using transmission electron microscopy. At the end of the experiment, results showed that the mortality and the body mass varied according to the used nominal concentrations. Significant alterations were noted in all the treatment groups. The degree of these alterations depends on the used concentration, and they are represented especially by the cells remoteness and the border lyses, the reduction of the nuclear volume, the increase in the cytoplasm density with the presence of trace metal in the nucleus as well as in the vacuole, the disorganization and the destruction of microvilli, the condensation of the majority of cellular organelles and mitochondria swelling. Through this study, Orchestia genus could be an attractive candidate for the biochemical study of trace metal toxicity in Tunisian wetlands.     

Bioconversion of shrimp shell waste for the production of antioxidant and chitosan used as fruit juice clarifier

The pH, proteolytic activity, extent of demineralisation and deprotenisation of shrimp waste were studied during 7 days of fermentation using Pseudomonas aeruginosa A2. After 3 days, pH dropped from 7.0 to 4.4 and then remained constant. Simultaneously, a demineralisation of 92% was achieved. However, protease activity reached its highest level (1230 U mL^?1) after 1 day of incubation, and a protein removal of 90% was achieved. Chitin obtained was converted to chitosan. This chitosan, with 73% deacetylation, was tested for clarification of different fruit juices. It was observed that low concentrations of chitosan (below to 1%) greatly increase the clarity of juices without affecting the nutritional value. The antioxidant activity of the hydrolysates produced during fermentation was tested. Hydrolysate obtained after 3 days showed the strongest scavenging activity (90%), which was comparable to the positive control BHA; however, that obtained after 1 day exhibited the highest ferric‐reducing antioxidant power (OD 700 nm = 1.7).